49XF3E

A 49-inch signage panel for bright, window-facing locations

The 49XF3E is an open-frame display with a 48.50-inch measured diagonal and a Full HD resolution of 1,920 x 1,080. Its typical brightness of 3,000 cd/m² is the figure that sets it apart: it is designed to keep a message legible on a screen placed close to glass, where daylight would wash out a standard indoor display. As an open-frame unit, it is normally fitted into a housing or cabinet designed by the installer around the site.

Readability in daylight and through polarized sunglasses

Three features work together for visibility. The QWP layer keeps the image readable when viewers wear polarized sunglasses, which helps drivers and pedestrians on sunny streets. Automatic brightness control adjusts output to the ambient light, raising it in strong light and lowering it in darkness, so the screen does not glare at night and draws less power when full output is not needed.

• Typical brightness of 3,000 cd/m² for daylight-exposed screens
• Power draw of 250 W typical and 290 W maximum
• Full HD 1,920 x 1,080 for menus, video and promotional loops

Reliability in Qatar's heat and dust

The stated operating range is 0 °C to 50 °C with humidity from 10% to 80%. Summer temperatures in Doha and the Industrial Area regularly rise above 45 °C, so the margin below the rated maximum is limited. Keep the screen out of direct sun, make sure the housing is ventilated, and have the SmartRooms Qatar team confirm site conditions during a free site survey. Conformal coating on every major circuit board protects against dust, iron powder and humidity, which matters near loading bays or construction zones.

Connectivity, software and installation planning

Inputs include two HDMI ports, a DisplayPort, a DVI-D port, audio and USB, with DisplayPort and external speaker outputs provided. RS232C in and out, an RJ45 input and an IR receiver input allow control from a building management system or a control room. The built-in webOS 3.0 platform with a quad core SoC plays content without a separate media player, managed through SuperSign CMS and monitored with SuperSign Control+ or SuperSign Control. Wi-Fi is available through the optional AN-WF500 dongle.

For mounting, the VESA interface is 600 x 400 mm, the monitor measures 1,092.7 x 626.4 x 105 mm and the head weighs 21.5 kg. The packed unit weighs 26.2 kg in a 1,195 x 196 x 760 mm carton. The built-in power supply accepts 100-240 V at 50/60 Hz, which covers Qatar's 240 V, 50 Hz mains.

Where the 49XF3E fits in Qatar

• A bank branch in Al Sadd with a street-facing window, showing service messages and branch information during daylight hours.
• A shopfront or mall entrance in West Bay or Lusail, running promotional loops that must be seen through glass.
• A hotel lobby in Msheireb or near Hamad International Airport, displaying arrival and event information.

What to plan before ordering

Measure the opening and confirm the VESA pattern before ordering, and check that the wall or frame can carry 21.5 kg for the head. Allow room for the 105 mm depth and cable routing. Government offices and schools ordering several units can raise a purchase order (LPO) or respond to government tenders through Monaqasat, and pay by bank transfer, cheque or purchase order. Request a quote from SmartRooms Qatar, usually answered within one working day, and include your site details so the free survey can be arranged.