LG Digital Signage Current

86XE3FS

LG 86XE3FS 86-inch Outdoor Display

Screen size: 86″
Resolution: 3840 x 2160 (UHD)
Brightness: 3,000nit (Typ.), 2,800nit (Min.)
Operation: 24/7

Priceon request

QuotationWithin 1 working day

DeliveryConfirmed with your quote, based on stock

PDFDownload datasheet

Overview

The LG 86XE3FS is an 86-inch digital signage display built for sites exposed to direct sunlight, rain and dust. Its 3,000 nit typical brightness keeps content readable at midday, its IP56 sealing and tempered laminated front glass suit open-air installation, and its 3840 x 2160 panel runs 24/7. It suits retail frontages, hotel forecourts and public plazas across Qatar where content must stay visible all day.

What the 86XE3FS is designed for

The LG 86XE3FS is an 86-inch digital signage display designed for permanent outdoor installation. Indoor screens often wash out in afternoon light, so this model is rated at 3,000 nits typical and 2,800 nits minimum to keep menus, promotions and wayfinding legible in open air. Its 3840 x 2160 IPS panel with a 16:9 aspect ratio shows sharp UHD content, and it can be mounted in landscape or portrait orientation.

Brightness and viewing features that matter outdoors

Brightness alone does not solve glare. The panel includes a quarter wave plate (QWP) layer, so the image stays visible to viewers wearing polarized sunglasses, which helps drivers and pedestrians in bright conditions. A built-in BLU sensor measures the backlight constantly and compensates when brightness drops during operation, while the auto brightness sensor raises output in strong light and lowers it in darkness to save power. The typical contrast ratio is 1,200:1, and the viewing angle is 178 degrees both horizontally and vertically.

Weather, dust and heat planning in Qatar

The enclosure is rated IP56, which protects against limited dust ingress and strong jets of water. The front glass is tempered and laminated at 9.52 mm thickness. The operating range is 0 to 40 °C with solar load and 0 to 50 °C without solar load, with humidity from 10 to 80 percent. Qatar summer afternoons can exceed 45 °C, so the 40 °C solar-load limit means the site should be shaded or well ventilated, and the SmartRooms Qatar team can review the exact position before installation. The unit has a built-in fan and temperature sensor, and its typical heat output is 4948 BTU/hr at 1450 W full white.

Where it fits in Qatar

Retail frontage in West Bay or The Pearl: promotions visible from the pavement during daylight hours.
Hotel or serviced apartment forecourt in Lusail: arrival information and welcome content at the entrance.
Event venue or stadium plaza: schedules and sponsor messages for visitors waiting outdoors.

What to plan before ordering

The head weighs 276 kg and the packed unit weighs 310 kg, so the wall or frame must be structurally checked before fixing, and a free site survey is recommended. Monitor dimensions are 1338 x 2100 x 187 mm and the carton measures 1503 x 2296 x 468 mm, so check doorways, lift access and the delivery route. Connectivity includes one HDMI input with HDCP 2.2, a DisplayPort input, a DVI-D input, RS232C control, wired LAN, an IR input and a USB 2.0 Type A port. The unit has no built-in Wi-Fi or speaker. Content is managed with webOS 3.0, LG Control Manager over wired LAN and compatible SuperSign CMS. It runs 24/7 and accepts 100 to 240 V AC at 50/60 Hz, a range that covers Qatar's 240 V supply.

SmartRooms Qatar supplies the display to all eight municipalities of Qatar and arranges professional installation. Purchase orders and government tenders are welcome. Request a quote with your site location, content type and mounting plan, and we will usually return a quotation within one working day.

Highlights

3,000 nit typical brightness, 2,800 nit minimum
IP56 sealing against limited dust and water jets
Operating range 0–40 °C with solar load
3840 x 2160 IPS panel, 16:9 aspect ratio
QWP layer for viewing through polarized sunglasses
BLU sensor and auto brightness control
webOS 3.0 with LG Control Manager over wired LAN

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

148 specifications · Source: manufacturer · checked Oct 2026

PANEL19

Screen Size (Inch): 86
Panel Technology: IPS / RGB
Back Light Type: Direct
Aspect Ratio: 16:9
Native Resolution: 3840 x 2160 (UHD)
Refresh Rate: 120Hz
Brightness: 3,000nit (Typ.), 2,800nit (Min.)
Contrast Ratio: 1,200:1 (Typ.)
Dynamic CR: 500,000:1
Color Gamut: NTSC 68%
Viewing Angle (H x V): 178º x 178º
Color Depth (Number of Colors): 1.07 Billion colors
Response Time: 8ms (G to G)
Surface Treatment (Haze): Haze 3%
Life time: 50,000Hrs (Typ.)
Operation Hours (Hours/Day): 24/7
Portait / Landscape: YES / YES
Transparency: N/A
QWP (Quarter Wave Plate): YES

CONNECTIVITY19

HDMI In: YES (1ea)
HDMI In (HDCP Ver.): 2.2
DP In: YES (HDCP 1.4)
DVI-D In: YES
RGB In: NO
Audio In: YES
RS232C In: YES
RJ45(LAN) In: YES (1ea)
IR In: YES
USB In: USB2.0 Type A (1ea)
HDMI Out: NO
DP Out: NO
Audio Out: NO
Touch USB: NO
External Speaker Out: YES
RS232C Out: YES
RJ45(LAN) Out: YES
IR Out: NO
Daisy Chain: NO

MECHANICAL SPECIFICATION10

Bezel Color: Black
Bezel Width: T/R/L/B : 101/135/135/101mm
Weight (Head): 276Kg
Weight (Head+Stand): N/A
Packed Weight: 310Kg
Monitor Dimensions (W x H x D): 1338 x 2100 x 187mm
Monitor Dimension with Stand (W x H x D): N/A
Carton Dimensions (W x H x D): 1503 x 2296 x 468mm
Handle: YES
VESA Standard Mount Interface: N/A

PROTECTION GLASS6

Thickness: 9.52mm
Degree of Protection: YES (P2A)
Tempered / Chemical strengthening: Tempered strengthening
Anti-Reflective: YES
Infrared - Resistance (IR): N/A
Shatter-Proof: YES

FEATURE - HARDWARE13

Internal Memory (eMMC): 8GB
Wi-Fi/BT (Built-in): NO
Temperature Sensor: YES
Auto Brightness Sensor: YES
Pixel Sensor: YES
Proximity Sensor: NO
Current Sensor: YES
BLU Sensor: YES
Humidity Sensor: YES
Acceleration(Gyro) Sensor: YES
Power Indicator: YES
Local Key Operation: NO
FAN (Built-in): YES

FEATURE - SOFTWARE39

OS Ver. (webOS): webOS 3.0
Local Contents Scheduling: YES
Group Manager: NO
USB Plug & Play: YES
Fail over: YES
Booting Logo Image: YES
No Signal Image: YES
RS232C Sync: YES
Local Network Sync: YES
Backlight Sync: NO
PIP: NO
PBP: NO
Screen Share: NO
Video Tag: YES (2 Video Tag)
Play via URL: NO
Screen Rotation: YES
External Input Rotation: YES
Gapless Playback: YES
Tile Mode Setting: YES
Setting Data Cloning: YES
SNMP: YES
ISM Method: YES
Auto Set ID: YES
Status Mailing: YES
Control Manager: YES
Cisco Certification: NO
Crestron Connected: NO
Smart Energy Saving: YES
PM mode: YES
Wake on LAN: YES
Network Ready: NO
Beacon: NO
HDMI-CEC: YES
SI Server Setting: YES
webRTC: NO
Pro:Idiom: NO
Brightness Compensation: YES
W/B Setting by Grey scale: NO
Scan Inversion: NO

ENVIRONMENT CONDITIONS2

Operation Temperature: 0 °C to 40 °C (with Solar) 0 °C to 50 °C (without Solar)
Operation Humidity: 10 % to 80 %

POWER2

Power Supply: AC 100-240V~, 50/60Hz
Power Type: Built-In Power

POWER CONSUMPTION5

Typ.: 1450W (Full White) 680W (IEC 62087)
Max.: 1850W
BTU (British Thermal Unit): 4948 BTU/Hr(Typ.), 6312 BTU/Hr(Max.)
DPM: 1W
Power off: 0.5W

SOUND1

Speaker (Built-in): NO

CERTIFICATION4

Safety: CB / NRTL
EMC: FCC Class "A" / CE / KC / VCCI
ERP / Energy Star: YES / NO
ePEAT(US only): NO

OPS COMPATIBILITY2

OPS Type compatible: NO
OPS Power Built-in: NO

SOFTWARE COMPATIBILITY7

SuperSign CMS: YES
SuperSign Control+: YES
SuperSign WB: NO
SuperSign Cloud: NO
Promota: NO
Mobile CMS: NO
Connected Care: YES

LANGUAGE1

OSD: English, French, German, Spanish, Italian, Korean, Chinese(Simplified), Chinese(Original), Portugues(Brazil), Swedish, Finnish, Norwegian, Danish, Russian, Japanese, Portugues(Europe), Dutch, Czech, Greek, Arabic

ACCESSORY2

Basic: Remote Controller(Including Battery 2ea), HDMI Cable, USB Cable, Manual (IG&EIG), Regulation Book, Phone to RS232C Gender, LAN extension cable, Cord Grip rubber(3ea)
Optional: NO

SPECIAL FEATURE8

Overlay Touch Compatibility: N/A
Smart Calibration: N/A
Tilt (Face up): N/A
Tilt (Face down): N/A
IP Rating: IP56
Conformal Coating (Power Board): YES
Power Protection: YES
Direct Sunlight: YES

DEDICATED FEATURE - TOUCH8

Available Object Size for Touch: N/A
Response Time ('Paint' app on Windows 10 PC): N/A
Accuracy (Typ.): N/A
Interface: N/A
Protection Glass Thickness: N/A
Protection Glass Transmission: N/A
Operating System Support: N/A
Multi Touch Point: N/A

Downloads

6 files from the manufacturer

PDF Datasheets 86XE3FS_Datasheet(low)_LG Digital Signage_230901_20230903_231601_.pdf 2.4 MB PDF Manuals & guides MFL71459703_00_IG_190916.pdf 4.8 MB PDF Manuals & guides OM_ENG.pdf 2.2 MB PDF Manuals & guides webOS 3.0_UG_ENG.pdf 5.7 MB PDF Drawings & CAD 86xe3fs_2d_20220713_140851_.pdf 663 KB DWG Drawings & CAD · Opens on manufacturer site 86xe3fs_2d.dwg

Questions about 86XE3FS

Is the LG 86XE3FS designed for outdoor installation in Qatar?

Yes. The 86XE3FS is an outdoor display with IP56 protection against limited dust ingress and strong water jets, and a 3,000 nit typical brightness for daylight viewing. Its operating range is 0 to 40 °C with solar load, so Qatar's summer heat requires shade or ventilation planning. SmartRooms Qatar can review the exact location with you before the quotation is finalised.

How bright is the 86XE3FS compared with the ambient light at my site?

The panel is rated at 3,000 nits typical and 2,800 nits minimum. An auto brightness sensor adjusts output to the surrounding light, and the built-in BLU sensor compensates when brightness drops during operation. Compare the minimum figure with the light level at your entrance, such as a shaded Doha forecourt at midday, and share the location when requesting a quote.

Can people wearing polarized sunglasses read the screen?

Yes. The display includes a quarter wave plate (QWP) layer that keeps the image visible through polarized sunglasses. This matters for drivers stopping at a roadside entrance or pedestrians crossing a plaza in Al Sadd under strong glare. Confirm sightlines against the site plan with the SmartRooms Qatar team before the unit is fixed in place.

What is the operating temperature range, and what does it mean for a site in Qatar?

The rated range is 0 to 40 °C with solar load and 0 to 50 °C without solar load, with humidity from 10 to 80 percent. Summer ambient temperatures in Qatar can exceed 45 °C, so a screen in direct sun is limited by the 40 °C figure. Shade, airflow and orientation should be confirmed before installation, and a site survey helps plan this.

How much power does the display draw, and what does that mean for cooling?

Typical consumption is 1450 W at full white and 680 W under IEC 62087 measurement, with a maximum of 1850 W. Heat output is 4948 BTU/hr typical and 6312 BTU/hr maximum. For a 24/7 installation in an enclosed area, include these figures in cooling planning. The power input of 100 to 240 V AC at 50/60 Hz covers Qatar's 240 V supply.

How heavy is it, and what should I plan for mounting?

The head weighs 276 kg and the packed unit weighs 310 kg, so the wall or frame must be checked by a structural engineer before fixing. Monitor dimensions are 1338 x 2100 x 187 mm. Confirm the mounting interface with the SmartRooms Qatar team before ordering, as the method depends on your structure. A free site survey covering access route and lifting plan is recommended.

Which inputs and control connections does it have?

The display provides one HDMI input with HDCP 2.2, a DisplayPort input with HDCP 1.4, a DVI-D input, an audio input, RS232C control, wired LAN, an IR input and a USB 2.0 Type A port. It has no HDMI or DisplayPort outputs and no daisy chain, so it cannot pass a signal to another screen. Ask the team to confirm the cabling for your media player or controller.

Does it need Wi-Fi or a separate media player?

It has no built-in Wi-Fi or Bluetooth, so connect it to the network with wired LAN. The webOS 3.0 platform runs on a quad core SoC with 8GB of internal memory and can run content without a separate media player. OPS slots are not supported. The on-screen menu offers Arabic and English among its languages, and the unit supports SuperSign CMS.

How can facilities teams monitor several outdoor screens?

LG Control Manager is an embedded web monitoring program that reports temperature, pixel, door, ambient light and gyro sensor readings in real time, using a wired LAN connection. SNMP and status mailing are supported, and SuperSign CMS handles content scheduling. This suits a property manager running several entrances across Lusail who needs alerts before a fault affects visitors.

Does the 86XE3FS include a built-in speaker?

No. The unit has no built-in speaker, but it provides an external speaker output and an audio input. Sound for an outdoor plaza or entrance would need external speakers and an amplifier, which should be specified in the quotation so the audio setup is priced and installed together with the display.

What is included in the box?

The basic package includes a remote controller with two batteries, an HDMI cable, a USB cable, the installation and user manuals, a regulation book, a phone-to-RS232C gender adapter, a LAN extension cable and three cord grip rubbers. No optional accessories are offered. Mounting hardware is not listed in the package, so confirm it when requesting a quote.

Can a government ministry or school buy the 86XE3FS through a tender or purchase order?

Yes. SmartRooms Qatar accepts purchase orders (LPOs), government tenders including Monaqasat, and payment by bank transfer, cheque or purchase order. A ministry or authority buying one outdoor display for a site entrance can request a quotation for internal review, and quotations are usually issued within one working day. Delivery covers all eight municipalities of Qatar.