Peerless DST965 · Price in Qatar

Name: Peerless DST965 Back-to-Back Ceiling Mount for 40-65 inch Displays
Brand: Peerless
SKU: peerless-dst965
Availability: InStock

Overview

The Peerless DST965 is a back-to-back ceiling mount for two digital signage displays between 40 and 65 inches. It holds up to 136.08 kg, tilts 20 degrees, and includes shelves for media players, with side panels that hide the cabling. Tamper and theft resistant hardware suits hotel lobbies, malls and corporate receptions across Doha, West Bay and Lusail. Request a quote and our team will confirm the configuration.

What this ceiling mount does

The Peerless DST965 is a back-to-back ceiling mount that holds two digital signage displays on one column, so screens face opposite directions from a single point in the ceiling. It accepts displays from 40 to 65 inches and has a maximum load capacity of 136.08 kg. Its fixed 20 degree tilt helps angle each screen toward the people who need to read it. The mount is rated for indoor use only, which shapes where you can place it.

Storage and cable management

Two shelves inside the column hold media players or standard size computers, so playback hardware stays out of sight and close to the screens it feeds. Two side panels enclose the wiring and components. Cables run through the column for a tidy finish, and the side panels can be removed when technicians need to service the players or connections.

Build, security and dimensions

The unit measures 49.91 cm high, 79.60 cm wide and 46.56 cm deep, and weighs approximately 36.29 kg before displays are attached. The black finish is powder coated over a fused epoxy layer. The listed durability features are scratch resistance, tamper resistance and theft resistance, and security hardware is included to deter tampering and loss. The mount uses a 730 x 405 pattern with a minimum pattern of 100 x 100, and its universal adapters are designed to fit a range of displays.

Where it fits in Qatar

Shopping malls in West Bay or Al Rayyan: a back-to-back pair above a mall corridor can show promotions to shoppers walking in both directions.
Hotel lobbies in Msheireb or The Pearl: wayfinding or event screens on a central column, with cabling hidden in a design-led space.
Corporate reception areas in Doha: a bilingual welcome or information display facing both the lift lobby and the seating area.
Schools and training centres in Education City: announcements in a central corridor, visible from two sides.

Planning the installation

The mount requires assembly, so allow time for it with your installer. Before fixing anything to a ceiling, confirm the structure can carry the mount plus two displays. The mount alone weighs approximately 36.29 kg against a rated capacity of 136.08 kg. SmartRooms Qatar offers free site surveys, which is the right step before drilling into a suspended ceiling or concrete slab in a busy Doha building. Because the mount is rated for indoor use only, confirm the environment with the SmartRooms Qatar team before ordering.

Ordering and next steps

Public bodies, schools and companies ordering several units can raise a purchase order (LPO), and payment is available by bank transfer, cheque or purchase order. Government tenders, including Monaqasat, are supported. The mount is covered by the manufacturer's 5 year limited warranty. To receive a quotation, send the display sizes, number of mounting points and ceiling type, and request a quote. Quotations are usually issued within one working day.

Highlights

Holds two displays from 40 to 65 inches, back to back
Maximum load capacity of 136.08 kg
Fixed 20 degree tilt on the mount
Two shelves for media players or standard size computers
Removable side panels conceal cabling and components
Tamper, theft and scratch resistant security hardware

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

39 specifications · Source: manufacturer · checked Oct 2026

General Information9

Manufacturer: Peerless Industries, Inc
Manufacturer Part Number: DST965
Manufacturer Website Address: http://www.peerless-av.eu.com
Brand Name: SmartMount®
Product Series: DST965
Product Model: DST965
Product Name: Back-to-Back Ceiling Mount with Media Player Storage for 40" to 65" Displays
Packaged Quantity: 1 Unit
Product Type: Ceiling Mount

Product Information11

Device Supported: Digital Signage Display; Display; Media Player
Number of Displays Supported: 2
Maximum Load Capacity: 136.08 kg
Minimum Screen Size Supported: 40" (101.60 cm)
Maximum Screen Size Supported: 65" (165.10 cm)
Features: Cable Management; Multiple Viewing Angle; Storage Space; Tilt
Mount Pattern Compatibility Type: Universal
Maximum Tilt Angle: 20°
Mount Function: Cable Management; Tilt
Mount Surface: Ceiling
Durability: Scratch Resistant; Tamper Resistant; Theft Resistant

Physical Characteristics11

Color Family: Black
Product Color: Black
Finishing: Fused Epoxy; Powder Coated
VESA Mount Compatible: Yes
Mounting Pattern: 730 x 405
Minimum Mounting Pattern: 100 x 100
Form Factor: Ceiling Mountable
Height: 49.91 cm (19.65")
Width: 79.60 cm (31.34")
Depth: 46.56 cm (18.33")
Weight (Approximate): 36.29 kg

Miscellaneous7

Package Contents: Back-to-Back Ceiling Mount with Media Player Storage for 40" to 65" Displays; 2 x Universal Adapter; 2 x Side Panel; 2 x Shelf; Interface Bracket
Indoor/Outdoor: Indoor
Manufacturer Product Class: Ceiling Mount
Assembly Required: Yes
Country of Origin: United States
TAA Compliant: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)

Warranty1

Limited Warranty: 5 Year

Downloads

5 files from the manufacturer

PDF Datasheets DST965_Product-Datasheet.pdf 242 KB PDF Manuals & guides DST965_Assembly-Instructions.pdf 651 KB DWG Drawings & CAD · Opens on manufacturer site DST965_CAD DRAWING.dwg PDF Other documents DST965_Additional-pdf1.pdf 1.3 MB URL Other documents · Opens on manufacturer site BIMobject

Questions about DST965

What is the Peerless DST965 designed for?

The DST965 is a ceiling mount that holds two digital signage displays back to back on one column, with screens from 40 to 65 inches. It suits lobbies, corridors and reception areas where information must be visible from two directions. Shelves inside the column hold media players, so playback hardware sits close to the screens. Because it is rated for indoor use, it is best suited to enclosed commercial spaces in Doha, West Bay or Lusail.

Which screen sizes and how many displays does it support?

The mount supports two displays and accepts screen sizes from 40 inches to 65 inches. The source data lists a 730 x 405 mounting pattern and a minimum pattern of 100 x 100, and it includes universal adapter plates to fit a range of displays. Before ordering, check that your display's rear mounting pattern falls within these figures. Send the exact display models with your quotation request and the SmartRooms Qatar team will confirm the fit.

How much weight can the mount carry?

The maximum load capacity is 136.08 kg for the whole assembly. The mount itself weighs approximately 36.29 kg, so the remaining capacity covers the two displays and any attachments. Check the weight of your chosen displays in their datasheets and have your installer confirm the ceiling structure before fixing the mount. This is especially important in older buildings in Doha where ceiling loads are not documented.

Can media players be stored inside the column?

Yes. Two shelves inside the column provide storage for standard size computers and media players, and two side panels hide the wiring and components from view. Cables are routed through the column for a clean appearance, and the side panels are removable for maintenance. In a hotel lobby or retail corridor in Doha, this keeps playback equipment out of guests' sight while still allowing technicians to reach it.

How much tilt does the DST965 provide?

The mount has a maximum tilt angle of 20 degrees, and the displays are held at a fixed tilt. The tilt helps angle screens downward toward people standing or seated below, which matters under high ceilings such as an atrium or event hall in Lusail. Because the tilt is fixed rather than adjustable, check your viewing positions with your installer before ordering so the angle suits the room.

Will it suit a hotel lobby in Msheireb?

Yes, provided the lobby is indoors, which is the environment the mount is rated for. A back-to-back pair on a central ceiling column can show wayfinding or event information to guests arriving from two directions. Concealed cabling and the included security hardware help keep a clean look in a public space. Ask for a free site survey to confirm ceiling height and sightlines before the mount is fixed.

Can I install it on an open-air terrace or sunshade area in Lusail?

No. The source data lists the DST965 as indoor only, so it is not suited to open-air terraces, sunshades or areas exposed to dust storms and summer temperatures above 45 degrees Celsius. For a covered or semi-exposed area, contact the SmartRooms Qatar team before requesting a quote so we can advise on the environment and suggest a suitable option.

Is it compatible with displays from other brands?

The mount is VESA mount compatible and includes universal adapter plates, so it is designed to work with a range of displays from different manufacturers within the 40 to 65 inch range. Compatibility still depends on each display's rear mounting pattern, weight and connector position. Give the SmartRooms Qatar team the exact display models and we will check them against the mount before you place an order.

Does a school in Al Wakrah need a site survey before installation?

For a school fitting out a corridor or hall in Al Wakrah, a site survey is a sensible first step. SmartRooms Qatar offers free site surveys, which let the team inspect the ceiling type, measure the column position and confirm that the structure can carry the mount with two displays. Checking these points first avoids delays once the timetable for the works is fixed.

Does the mount arrive assembled, and who installs it?

No. The source data states that assembly is required, so the mount must be put together before it is fixed to the ceiling. SmartRooms Qatar supplies the mount and offers professional installation across Qatar. Ask for the installation scope in your quotation so that assembly, cable routing and the final fixing are all covered by the same team.

What warranty and compliance information applies to the DST965?

The DST965 carries a 5 year limited warranty from the manufacturer. It is made in the United States, is TAA compliant and is RoHS compliant. These details help government and public-sector buyers who must document country of origin and compliance in a tender. Warranty terms are set by the manufacturer, and the relevant information can be included with your quotation.

Can a government entity buy this mount through a tender or LPO?

Yes. SmartRooms Qatar supplies government bodies through purchase orders (LPOs) and government tenders, including Monaqasat. Payment can be made by bank transfer, cheque or purchase order. If you need several DST965 mounts for a ministry building or a group of schools, include the quantity and site locations in your request, and quotations are usually issued within one working day.