43SM5KC
LG 43SM5KC 43-inch 450 nits FHD Business Signage Display
- Screen size
- 43"
- Resolution
- 1,920 x 1,080 (FHD)
- Brightness
- 450 nit
- Operating temp.
- 0°C to 40°C
The LG 43SM5KC is a 43-inch FHD business signage display rated at 450 nits, and the manufacturer has discontinued this model. It runs in portrait or landscape, takes HDMI, DisplayPort and DVI-D inputs, and has a built-in power supply. Organisations in Qatar that already run it, or need a like-for-like replacement for indoor retail and office signage, should request a quote for a current equivalent or compatible replacement.
What this discontinued LG model is and who it suits
The LG 43SM5KC is a 43-inch Full HD signage display from the SM5K series, built for indoor retail and office use. LG has discontinued this model, so this page serves three groups: organisations that already run one and need matching units, buyers comparing it with newer signage, and anyone who needs a replacement that works the same way. SmartRooms Qatar can quote a current equivalent or a compatible replacement, and will check the mounting and input layout against your existing installation before you commit.
Panel, brightness and orientation
The 1,920 x 1,080 panel is rated at 450 nits. That suits interior walkways, shop interiors and reception areas lit by artificial light, but it is not a high-brightness outdoor unit. The screen runs in portrait or landscape, so one model can carry a tall menu board or a wide wayfinding screen. Side bezels measure 11.9 mm and the bottom bezel measures 18 mm, so units placed side by side show a narrow gap at the sides and a wider one along the bottom.
Connectivity, control and software
Inputs cover HDMI, DisplayPort, DVI-D, RGB, audio and an SD card slot. DisplayPort and audio are also listed as outputs. For control, the unit offers RS232C in and out, an RJ port, an IR receiver, a pixel sensor connection, USB 3.0 and the SD card slot. It is listed as compatible with SuperSign-w lite and SuperSign-c.
- OPS compatible, with the optional OPS kit KT-OPSA
- External media player attachable: MP500 or MP700
- Optional HDBaseT extender EB-B100 for longer cable runs
Power, heat and planning for Qatar
The built-in power supply accepts 100-240V at 50/60Hz, which covers the 240 V, 50 Hz mains in Qatar. Typical consumption is 75 W, falling to 55 W in smart energy saving mode, and the unit carries Energy Star 7.0 certification. The panel has no power switch, so agree in advance how it will be switched on and off. The operating range is 0°C to 40°C with 10% to 80% humidity. Qatar summers often pass 45°C, so install the display only in air-conditioned rooms, not in outdoor enclosures, unconditioned kiosks or sun-exposed lobbies.
Typical fits include a shop in Msheireb showing portrait promotions beside the entrance, an office lobby in West Bay running landscape wayfinding, and a clinic reception in Al Rayyan where a wall-mounted screen sits within view of the waiting area. Each location should be checked for heat and sunlight before installation.
Mounting, accessories and what to send us
The head weighs 9.8 kg and measures 969.6 x 563.9 x 38.6 mm. It uses a 200 x 200 mm VESA interface. Optional accessories include the wall bracket LSW230B, the stand ST-432T and the VESA adapter AM-B220S. The box includes a remote controller with two batteries, a power cord, a quick start guide, an RGB cable, a regulation book, a phone-to-RS232C adapter and a memory cover. Products are covered by the manufacturer's warranty.
Because the model is discontinued, check your existing mounting pattern and cable runs before ordering. SmartRooms Qatar offers free site surveys, and can confirm wall condition, load and cable routing in your building. Send us the model, the number of units and the location, and SmartRooms Qatar will return a quotation, usually within one working day, for a current equivalent or compatible replacement. Request a quote today.
Highlights
- 43-inch Full HD panel at 1,920 x 1,080 resolution
- 450 nits brightness with portrait or landscape use
- HDMI, DisplayPort, DVI-D inputs and RS232C control
- OPS compatible and ready for external media players
- Operating range 0°C to 40°C, air-conditioned rooms only
- Built-in 100-240V power supply, typical 75 W
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
PANEL4
- Screen Size
- 43"
- Resolution
- 1,920 x 1,080 (FHD)
- Brightness
- 450
- Orientation
- Portrait & Landscape
CONNECTIVITY3
- Input
- HDMI, DP, DVI-D, RGB, Audio, SD card
- Output
- DP, Audio
- External Control
- RS232C in/out, RJ in, IR Receiver, Pixel Sensor, USB 3.0, SD Card
PHYSICAL SPECIFICATION4
- Bezel Width
- 11.9 mm (T/R/L), 18 mm (B)
- Monitor Dimension (W x H x D)
- 969.6 x 563.9 x 38.6 mm
- Weight (Head)
- 9.8 kg
- VESA™ Standard Mount Interface
- 200 x 200 mm
ENVIRONMENT CONDITIONS2
- Operation Temperature
- 0°C to 40°C
- Operation Humidity
- 10 % to 80 %
POWER3
- Power Supply
- 100-240V~, 50/60Hz
- Power Type
- Built-In Power
- Power Switch
- No
POWER CONSUMPTION2
- Typ.
- 75 W
- Smart Energy Saving
- 55 W
STANDARD(CERTIFICATION)4
- Safety
- UL / cUL / CB / TUV / KC
- EMC
- FCC Class "A" / CE / KCC
- ErP / Energy Star
- N/A / Yes (Energy Star 7.0)
- Audio Power
- 20 W (10 W x 2) for Internal Speaker (6 ohm)
MEDIA PLAYER COMPATIBILITY2
- OPS Type Compatible
- Yes
- External Media player Attatchable
- Yes (MP500/MP700)
SOFTWARE COMPATIBILITY2
- SuperSign-w lite
- Yes
- SuperSign-c
- Yes
ACCESSORY2
- Basic
- Remote Controller (included 2ea batteries), Power Cord, QSG, RGB Cable, Regulation Book, Phone to RS232C Gender, Memory cover
- Optional
- Speaker (SP-5000), Stand (ST-432T), Pixel sensor (KT-SP0), Media player, Wall bracket (LSW230B), VESA Adapter (AM-B220S), OPS Kit (KT-OPSA), HDBaseT (EB-B100)