Peerless ACC-MB2200 · Price in Qatar

Name: Peerless-AV ACC-MB2200 SmartMount Menu Board Wall Plate Accessory
Brand: Peerless
SKU: peerless-acc-mb2200
Availability: InStock

Overview

The Peerless-AV ACC-MB2200 is a black, powder-coated wall plate that extends a menu board mount to take 40 to 48-inch displays. It carries up to 45.36 kg and mounts in landscape or portrait. Listed as compatible with DS-MBZ642L, DS-MBZ647L and DS-MBZ647P, it suits quick service restaurants in Doha, Lusail and Al Sadd that need a wider display surface. Request a quote and we will confirm fit first.

What the ACC-MB2200 adds to a menu board mount

The Peerless-AV ACC-MB2200 is a wall plate accessory for menu board installations. It widens the surface a mount is fixed to, so the mount can carry a larger screen. Each plate measures 55.88 cm (22 inches) wide, 36.78 cm (14.48 inches) high and 1.90 cm (0.75 inches) deep, and weighs approximately 1.68 kg. The finish is matte black and powder coated.

Plates connect side by side to form one continuous mounting surface. Installers can match the width to the display rather than choosing between a single narrow plate and an oversized one. Wider options in the same range go from 8 inches up to 38.75 inches, so a menu wall can be built to suit its exact layout.

Screen sizes, load and orientation

These are the key figures for planning the mount.

Screen support: 40 inches (101.60 cm) to 48 inches (121.92 cm)
Maximum load: 45.36 kg
Orientation: landscape or portrait
Design: open plate that reduces interference with the wall
Package: wall plate and mounting hardware; assembly required

Where it fits in Qatar

Three situations suit this accessory well:

A quick service restaurant in West Bay or The Pearl that wants a larger menu display above its ordering counter, where a standard mount is too narrow.
A food outlet inside a Doha shopping mall replacing an older menu wall with a 48-inch screen, where the installer needs a clean, flat mounting surface.
A restaurant group in Al Rayyan or Lusail rolling out one menu layout across several branches, specifying one part for each site.

What to plan before installation

Assembly is required, so allow the installer time to fit the plates and hardware before the screen goes up. Check the wall construction and make sure the combined weight of plate, mount and display stays within the 45.36 kg rating. The manufacturer's data does not state an operating temperature range, so confirm the location with the SmartRooms Qatar team before installing in a hot, sun-facing or dusty area.

The plate is listed as compatible with DS-MBZ642L, DS-MBZ647L and DS-MBZ647P. If your current mount is a different model, send its number with your enquiry so the team can confirm fit before you order. The plate is RoHS and TAA compliant and carries a 5-year limited warranty from the manufacturer. A free site survey can confirm wall type and mounting height before the order is placed.

Request a quote for your menu wall

To confirm fit with your display, wall and layout, request a quote from SmartRooms Qatar. We supply to all eight municipalities of Qatar, provide professional installation, and accept purchase orders (LPOs), government tenders including Monaqasat, and payment by bank transfer, cheque or purchase order. Quotations are usually issued within one working day.

Highlights

Extends menu board mounts for 40 to 48-inch screens
Maximum load capacity of 45.36 kg
Landscape and portrait orientation supported
Connects with other plates for a wider surface
Matte black powder-coated finish, about 1.68 kg
RoHS and TAA compliant, 5-year limited warranty

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

33 specifications · Source: manufacturer · checked Oct 2026

General Information9

Manufacturer: Peerless Industries, Inc
Manufacturer Part Number: ACC-MB2200
Manufacturer Website Address: http://www.peerless-av.eu.com
Brand Name: SmartMount®
Product Series: ACC-MB2200
Product Model: ACC-MB2200
Product Name: Menu Board Wall Plate Accessory
Packaged Quantity: 1 Unit
Product Type: Mounting Plate

Product Information7

Device Supported: Display; Menu Board
Maximum Load Capacity: 45.36 kg
Minimum Screen Size Supported: 40" (101.60 cm)
Maximum Screen Size Supported: 48" (121.92 cm)
Orientation: Landscape/Portrait
Mount Function: Accessory
Mount Surface: Wall

Physical Characteristics8

Color Family: Black
Product Color: Black
Finishing: Matte; Powder Coated
Form Factor: Wall Mountable
Height: 36.78 cm (14.48")
Width: 55.88 cm (22")
Depth: 1.90 cm (0.75")
Weight (Approximate): 1.68 kg

Miscellaneous8

Package Contents: Menu Board Wall Plate Accessory; Mounting Hardware
Application/Usage: Restaurant; Wall
Compatibility: DS-MBZ642L; DS-MBZ647L; DS-MBZ647P
Certifications & Standards: RoHS, TAA
Manufacturer Product Class: Menu Board Accessory
Assembly Required: Yes
TAA Compliant: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)

Warranty1

Limited Warranty: 5 Year

Downloads

4 files from the manufacturer

PDF Datasheets ACC-MB2200_Product-Datasheet.pdf 216 KB PDF Manuals & guides ACC-MB2200_Assembly-Instructions.pdf 845 KB DWG Drawings & CAD · Opens on manufacturer site ACC-MB2200_CAD DRAWING.dwg URL Other documents · Opens on manufacturer site BIMobject

Questions about ACC-MB2200

What is the Peerless-AV ACC-MB2200 used for?

It is a wall plate accessory that widens the mounting surface for a menu board mount, letting that mount carry screens between 40 and 48 inches. It is aimed at restaurant menu walls. Several plates can connect to build one continuous surface, so the installer can match the width to the display. Assembly is required on site, and the package includes the plate and mounting hardware.

Which screen sizes does it support?

The source data lists support for screens from 40 inches (101.60 cm) to 48 inches (121.92 cm). Measure the diagonal of your display and confirm it falls within that range before ordering. If your screen is outside this window, ask SmartRooms Qatar to recommend a different plate width from the same accessory range, which runs from 8 to 38.75 inches.

What is the maximum load capacity, and how should I check it?

The maximum load capacity is 45.36 kg. This rating covers the whole assembly, so add the weight of the menu board mount and the display to the plate's own weight of about 1.68 kg. Check the wall construction before drilling. A free site survey from SmartRooms Qatar can confirm the wall type before you order.

Which menu board mounts is it compatible with?

The manufacturer lists compatibility with the DS-MBZ642L, DS-MBZ647L and DS-MBZ647P. If you are upgrading an existing menu wall that uses a different mount, send the model number with your enquiry. Our team will confirm whether it works with the plate before a purchase order is raised, so avoid assuming compatibility with unlisted models.

Can the plate be used in portrait orientation?

Yes. The accessory supports both landscape and portrait orientation. Portrait suits tall menu columns, such as a drive-through lane board, while landscape suits a wide counter menu above a cashier area. Confirm the display's own orientation settings with its manufacturer as well, since the screen must be rated for the orientation you choose.

What finish and dimensions does it have?

The plate has a matte, powder-coated black finish. It measures 55.88 cm (22 inches) wide, 36.78 cm (14.48 inches) high and 1.90 cm (0.75 inches) deep, with an approximate weight of 1.68 kg. The slim depth keeps the plate close to the wall, which helps a menu board sit flat in a restaurant dining area.

Is it suitable for hot, dusty conditions in Qatar?

The source data does not give an operating temperature range or an outdoor rating, so this page cannot confirm outdoor use. For a plate on a sun-facing frontage or in a hot, dusty service area in Mesaieed, Ras Laffan or the Industrial Area, ask SmartRooms Qatar to check the location and the display's environmental rating before you order.

I am fitting out restaurants in Lusail across several branches. Can I use one part number for all sites?

Yes, provided each site has a screen between 40 and 48 inches on a compatible mount. Using one plate across branches keeps specifications and installation consistent. Send a single quotation request listing each branch, screen size and mount model, and SmartRooms Qatar will prepare a separate quote for each location. Multi-site orders can be raised as purchase orders.

Does it need professional installation?

Assembly is required, so the work involves fitting the plate and hardware to the wall before the display goes on. SmartRooms Qatar offers professional installation across Qatar. For a busy restaurant in Doha, an installer can plan the work around quiet periods after a site survey has confirmed the fixing points and wall condition.

What certifications does the ACC-MB2200 carry?

The source data lists RoHS and TAA compliance. RoHS covers the restriction of certain hazardous substances in electrical products, and the TAA compliant entry means the product meets Trade Agreements Act requirements, which buyers often need for public-sector purchases. Tell us your tender requirements when you request a quote so we can confirm the documents you need.

What warranty does it come with?

The manufacturer provides a 5-year limited warranty on this accessory. Products supplied by SmartRooms Qatar are covered by the manufacturer's warranty. For the full terms, ask the team when you request a quote, so the warranty details can be filed with your asset records and purchase order.

Can a government body order it through a tender or LPO?

Yes. SmartRooms Qatar supplies government tenders, including those on Monaqasat, and accepts purchase orders (LPOs). Payment can be made by bank transfer, cheque or purchase order. For a ministry or public school ordering several menu walls, send the tender reference and the quantity with your enquiry so the quotation matches the tender specification.