Peerless DST975-4 · Price in Qatar

Name: Peerless DST975-4 Four-Display Ceiling Mount for 37 to 75-inch Screens
Brand: Peerless
SKU: peerless-dst975-4
Availability: InStock

Overview

The Peerless DST975-4 is a ceiling-mounted bracket with four telescoping arms, built to hold four displays between 37 and 75 inches in a square or rectangular layout. Each arm sets spacing by telescoping, and each display tilts 0 to 20 degrees and swivels 360 degrees at installation. It takes 56.70 kg to 226.80 kg and suits meeting rooms and lobbies across Qatar.

What the DST975-4 does for a multi-screen wall

The Peerless DST975-4 is a ceiling mount that carries four flat panels from one overhead point. Its four telescoping arms let the installer set the gap between displays, so the screens can sit in a square or rectangular layout that suits the room rather than the bracket. It accepts screens from 37 to 75 inches, which covers most of the sizes used for meeting room displays, lobby screens and operations dashboards.

Each display is held on a universal adaptor plate. The mounting pattern can reach 730 x 405 mm, and the mount is listed as VESA compatible, so it is designed for standard VESA-patterned displays within that range. Check each display's pattern against the 100 x 100 minimum and 730 x 405 maximum before ordering.

Tilt, swivel, load and cable routing

Tilt runs from 0 to 20 degrees and swivel covers a full 360 degrees. These angles are fixed during installation, so the installer should agree the viewing angles with the people who will use the room before the mount is fixed. The stated load capacity is 56.70 kg at the minimum and 226.80 kg at the maximum, so add up the weight of the four displays and compare it with that range.

A bottom cover hides the cabling as it runs along the arms, which keeps the ceiling run clean in open areas. The mount is finished in flat matte black powder coat, weighs approximately 63.96 kg and measures 130.05 cm wide, 130.05 cm deep and 55.37 cm high. Assembly is required.

Where it fits in Qatar

Three situations where a four-screen ceiling mount is a sensible choice:

Boardrooms in West Bay or Lusail: a senior team that connects with colleagues in Doha and abroad can see the agenda, the data and the remote participants at once.
Operations rooms in the Industrial Area or Ras Laffan: four live dashboards above a control desk, with the arms set to match the operators' sightlines.
Lobbies in The Pearl or Msheireb: a row of screens for wayfinding or corporate messages, mounted high to keep the floor clear.

The manufacturer lists this mount for indoor use, so it belongs in air-conditioned spaces.

What to plan before the mount goes up

Because the bracket is ceiling mounted and carries four displays, the structure and access matter as much as the screens. SmartRooms Qatar provides free site surveys, and we recommend one before installation to confirm the ceiling structure, the room height and where power and data cables will run. Professional installation is available through SmartRooms Qatar, and the team can confirm the environment for any area that is not air-conditioned.

Schools, ministries and companies in Qatar can order through a purchase order (LPO) or a government tender, and pay by bank transfer, cheque or purchase order. The manufacturer lists a 5-year limited warranty for this mount.

Request a quote

Tell us your display sizes, how many screens you need, the ceiling height and the room type. SmartRooms Qatar will prepare a quotation, usually within one working day, and the lead time will be confirmed with it. Request a quote for the DST975-4 today and we will help you plan the layout.

Highlights

Holds four displays from 37 to 75 inches
Mounting pattern up to 730 x 405 mm, VESA compatible
Tilt 0 to 20 degrees and swivel 360 degrees at installation
Telescoping arms set spacing between displays
Bottom cover for clean cable management along the arms
Stated load range 56.70 kg to 226.80 kg with 5-year limited warranty

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

39 specifications · Source: manufacturer · checked Oct 2026

General Information9

Manufacturer: Peerless Industries, Inc
Manufacturer Part Number: DST975-4
Manufacturer Website Address: http://www.peerless-av.eu.com
Brand Name: Peerless-AV®
Product Series: DST975-4
Product Model: DST975-4
Product Name: Multi-Display Ceiling Mount with 4 Telescoping Arms For 37" to 75" Displays
Packaged Quantity: 1 Unit
Product Type: Ceiling Mount

Product Information12

Device Supported: Display
Number of Displays Supported: 4
Minimum Load Capacity: 56.70 kg
Maximum Load Capacity: 226.80 kg
Minimum Screen Size Supported: 37" (93.98 cm)
Maximum Screen Size Supported: 75" (190.50 cm)
Features: Adjustable Arm; Adjustable Depth; Adjustable Viewing Angle; Cable Management; Swivel; Telescoping; Tilt
Minimum Tilt Angle: 0°
Maximum Tilt Angle: 20°
Maximum Swivel Angle: 360°
Mount Function: Cable Management; Swivel; Tilt
Mount Surface: Ceiling

Physical Characteristics11

Color Family: Black
Product Color: Black
Finishing: Flat Matte; Powder Coated
VESA Mount Compatible: Yes
Mounting Pattern: 730 x 405
Minimum Mounting Pattern: 100 x 100
Form Factor: Ceiling Mountable
Height: 55.37 cm (21.80")
Width: 130.05 cm (51.20")
Depth: 130.05 cm (51.20")
Weight (Approximate): 63.96 kg

Miscellaneous6

Package Contents: Multi-Display Ceiling Mount with Four Telescoping Arms for 37" to 75" Displays; Telescoping Arms; Universal Adaptor Plate; Mounting Hardware
Indoor/Outdoor: Indoor
Manufacturer Product Class: Ceiling Mount
Assembly Required: Yes
TAA Compliant: Yes
Environmental Compliance: Restriction of Hazardous Substances (RoHS)

Warranty1

Limited Warranty: 5 Year

Downloads

5 files from the manufacturer

PDF Datasheets DST975-4_Product-Datasheet.pdf 352 KB PDF Manuals & guides DST975-4_Assembly-Instructions.pdf 2.6 MB DWG Drawings & CAD · Opens on manufacturer site DST975-4_CAD DRAWING.dwg PDF Other documents DST975-4_Additional-pdf1.pdf 4.7 MB URL Other documents · Opens on manufacturer site BIMobject

Questions about DST975-4

Who is the DST975-4 designed for?

The DST975-4 suits organisations that want four screens driven from one overhead bracket, such as operations rooms, boardrooms and lobbies. It holds displays from 37 to 75 inches with a stated load range of 56.70 kg to 226.80 kg. If your project involves a single screen on a wall, a wall or single-display mount will usually be the better fit, and our team can confirm which option suits your room during the quote.

What screen sizes and how many displays does it support?

It supports four displays, with screen sizes from 37 inches (93.98 cm) to 75 inches (190.50 cm). The manufacturer data covers that range for the mount as a whole, so send us the exact size of each panel for a check before ordering. Each display must have a mounting pattern within the mount's range, which runs from a 100 x 100 minimum to a 730 x 405 maximum.

How much weight can the mount carry?

The stated load capacity runs from a minimum of 56.70 kg to a maximum of 226.80 kg. Add up the weight of your four displays with their mounting hardware and check the total sits inside that range. The mount itself weighs approximately 63.96 kg, so the ceiling structure has to take that weight as well. A site survey lets us check the ceiling before the order is placed.

Which VESA patterns does it fit?

The mount is VESA compatible and accepts mounting patterns up to 730 x 405 mm, with a minimum pattern of 100 x 100. Check the rear mounting pattern of each display against these figures before ordering. The package includes a universal adaptor plate and mounting hardware to help match different panels to the bracket.

Can the tilt and swivel be adjusted after installation?

The tilt and swivel are set during installation. Tilt ranges from 0 to 20 degrees and swivel covers up to 360 degrees. Agree the viewing angles with users before the installer fixes the displays, because these settings are made at that stage. The telescoping arms, by contrast, set the spacing between screens to match the room layout.

How is the cabling handled?

A bottom cover runs along the telescoping arms and conceals the cables, which keeps the ceiling area tidy in reception areas and boardrooms. Cable routing should still be planned during the site survey, including power and data runs to each display. The installer will confirm the route for each screen before the arms are fixed, so cables do not catch as the spacing is set.

Can it be used outdoors or in a space without air conditioning?

No. The manufacturer data lists this mount for indoor use only. In Qatar, where summer temperatures often exceed 45°C, a lobby or hall near glass or without air conditioning needs a careful check. Confirm the space with the SmartRooms Qatar team before ordering, and do not fit the mount in a covered outdoor area or a semi-open space.

Is it suitable for an operations room in the Industrial Area?

Yes, provided the room is indoor and air-conditioned. A four-display bracket can hold dashboards for production, logistics or monitoring above a control desk, with each arm spaced to match the operators' sightlines. Because the arms telescope, the installer can set the spacing to fit the layout, and a site survey helps confirm that the ceiling can carry the combined load.

Is it right for a university foyer or school hall in Education City?

Yes, for a foyer or hall that is indoors and air-conditioned. Four displays can show timetables, event schedules or wayfinding information from one ceiling point. Because the viewing angles are set at installation, measure seating positions and entrance sightlines in advance. Send your room size and ceiling height with your quote request so the layout can be checked.

Does it need professional installation?

Assembly is required, and the mount carries the combined weight of several displays, so professional installation is recommended. SmartRooms Qatar offers professional installation and a free site survey. The survey checks the ceiling structure, the room height and the cable routes before the mount is fixed, which reduces rework on the day of installation.

What warranty does the mount carry?

The manufacturer lists a 5-year limited warranty for the DST975-4 ceiling mount, and products supplied by SmartRooms Qatar are covered by the manufacturer's warranty. Include the model number DST975-4 on your purchase order and in your asset register so the mount can be traced to its installation location and date.

Can a government body buy it through an LPO or tender?

Yes. Ministries, authorities and public schools in Qatar can buy the DST975-4 through a purchase order (LPO) or a government tender, including Monaqasat listings. Payment can be made by bank transfer, cheque or purchase order. Request a quote with the model name, the number of mounts, the display sizes and the room type so the quotation matches the tender specification.