50BDL3650Q/00

What the 50BDL3650Q gives you on a 49.5-inch 4K panel

The Philips 50BDL3650Q is a Q-Line signage display from the 3000 Series, built around a 49.5-inch VA panel at 3840 x 2160. That is four times the pixel count of Full HD on the same screen, so fine text, logos and menu boards stay sharp when viewers stand close. A direct LED backlight provides 400 cd/m² of brightness, and the 178-degree horizontal and vertical viewing angles keep content readable from the side of a corridor or from a seated audience.

Picture handling includes progressive scan, dynamic contrast enhancement and 3/2 to 2/2 motion pull-down. The typical contrast ratio is 4000:1, the dynamic contrast ratio is rated at 500,000:1, and the typical response time is 8 ms, which suits video loops and animated promotions.

Connectivity and control for managed signage

Video arrives through two HDMI 2.0 inputs and one DVI-I input. Two USB 2.0 ports and one USB 3.0 port take media or accessories, and a micro SD slot is also fitted. Audio uses 3.5 mm input and output jacks, and two built-in 10 W RMS speakers handle short announcements in smaller rooms.

For control, the display offers an RJ45 network port, RS232C input and output on a 2.5 mm jack, and IR input and output on a 3.5 mm jack. RS232 and RJ45 are listed as network controllable, and RS232 and IR support signal loop-through, so screens can be chained from one control source. The remote control signal and keyboard can be locked, and keyboard controls can be hidden to keep settings out of public reach.

Internal player, Android 10 and remote management

The built-in player runs Android 10 on a quad-core Cortex A55 processor with a G52 MC1 GPU, 16 GB of storage and 3 GB of DDR memory. Images in JPEG, BMP and PNG, video in MPEG, H.264, H.263, H.265, AVI, MP4 and VP8, and audio in AAC, HEAAC and MPEG can be played from USB or micro SD media. The manufacturer positions the unit as Wave-ready for remote management, but the product data does not detail how that service is configured, so ask SmartRooms Qatar for current requirements before committing to a management plan.

Where it fits in Qatar and what to plan for

In a mall or hotel lobby in West Bay or Lusail, a 50-inch screen can carry wayfinding, promotions or event schedules. Placement is supported in both landscape and portrait, so it can work as a tall directory beside a lift lobby or a wide menu board above a reception desk. In a government reception area in Msheireb, the on-screen menus can be set to Arabic or English for mixed-language visitors.

Summer heat is the main planning factor. The operating range is 0 to 40 °C at 20 to 80% relative humidity without condensation, up to 3000 m altitude. Place the display indoors in an air-conditioned lobby or corridor, keep it out of direct sunlight, and avoid spaces that can exceed 40 °C. If a window-facing or entrance position is under consideration, confirm the environment with the SmartRooms Qatar team before installation.

Planning the installation

• Size: 1128.4 mm wide, 649.0 mm high and 63.5 mm deep, with a 14.9 mm even bezel.
• Weight: 14.75 kg, with a 400 mm x 400 mm wall mount pattern using M6 fixings.
• Power: 97 W typical consumption, below 0.5 W standby, energy label class G.
• Mains input: 100–240 V, 50/60 Hz, with an AC power cord included.

The box includes a remote control with AAA batteries, an IR sensor cable, RS232 cables, three wire clampers and a quick start guide. A free site survey from SmartRooms Qatar helps confirm wall structure, cable routes and viewing distances before a panel of this weight is fixed to a wall. The manufacturer's warranty is three years. Request a quote for this model and we will confirm lead times with your quotation, based on stock.