Sony CAB-RSJA1 · Price in Qatar

Name: Sony CAB-RSJA1 3.5mm Stereo Audio to D-Sub 9 Cable, 0.5 m
Brand: Sony
SKU: sony-cab-rsja1
Availability: InStock

Overview

The Sony CAB-RSJA1 is a 0.5 m cable with a 3.5mm stereo audio plug at one end and a D-Sub 9 connector at the other. It suits a short connection between a 3.5mm stereo audio source and a D-Sub 9 port on your display or signage equipment. Confirm the port layout on your equipment before ordering, then request a quote.

A short audio link for display and signage installations

The Sony CAB-RSJA1 is a 0.5 m cable that joins a 3.5mm stereo audio connector to a D-Sub 9 connector. Its job is narrow but important: it carries the audio feed between two pieces of equipment whose ports do not match directly, so the sound source can reach the display or signage system without an improvised connection on site. Because it is an accessory rather than a display, its value lies in getting the connection right the first time.

The 0.5 m length keeps slack short. In practice that suits a connection between a nearby media player or laptop and equipment in the same rack or cabinet, rather than a long run across a room. Cable routes in Qatari buildings often pass through ceiling voids and cable trays, so a short, fixed-length cable reduces loose lengths and clutter at the equipment end.

Key facts from the manufacturer data

Model: Sony CAB-RSJA1
Length: 0.5 m
Connectors: 3.5mm stereo audio plug and D-Sub 9 connector
Status: current model, supplied by quotation

The manufacturer data for this cable is brief, so this page does not list conductor type, shielding, pin assignment, operating temperature or colour. If your project depends on any of these, ask the SmartRooms Qatar team to confirm them before you order.

Where it fits in Qatar

A private school in Al Wakrah fitting out a new media room may need a short audio feed from a 3.5mm stereo source to a display with a D-Sub 9 port. In a corporate office in West Bay, a facilities team setting up a meeting room screen might use a similar short link inside an equipment box beside the display. In Msheireb, a retail or hospitality venue fitting a digital signage wall could need a short run inside a cabinet where space is tight.

Planning checks before you order

Confirm the D-Sub 9 port and its audio function on your display or player.
Check that the 3.5mm output on the source device is stereo.
Measure the distance between the devices, since 0.5 m only works when they sit close together.
Count the rooms: identical setups need identical cables, so order them together.

Get a quote from SmartRooms Qatar

Send SmartRooms Qatar the make and model of your display or source device, along with the port labels, and the team will help confirm whether this cable is the right fit. Quotations usually follow within one working day. We deliver to all eight municipalities of Qatar and accept purchase orders (LPOs), with payment by bank transfer, cheque or purchase order. Request a quote today.

Highlights

0.5 m cable length
3.5mm stereo audio plug at one end
D-Sub 9 connector at the other end
Current Sony model, supplied by quotation
Confirm port match before ordering

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

Source: manufacturer · checked Oct 2026

The full specification and datasheet for this model are available on request; we send them with your quotation.

Downloads

1 file from the manufacturer

PDF Datasheets CAB-RSJA1_spec_sheet_en_GB.pdf 128 KB

Questions about CAB-RSJA1

What is the Sony CAB-RSJA1 used for?

The Sony CAB-RSJA1 is an audio cable that carries a stereo signal from a device with a 3.5mm stereo output to equipment with a D-Sub 9 connector. It is useful when the source and the display or signage system do not share the same audio port, so you avoid improvising a connection on site. Because it is an accessory, check it against the port layout of your specific equipment before ordering.

What connectors does the CAB-RSJA1 have?

One end is a 3.5mm stereo audio plug and the other end is a D-Sub 9 connector. The manufacturer data identifies these two connector types and the 0.5 m length, and nothing more. Check that the 3.5mm plug fits the audio output on your source device and that the D-Sub 9 end matches the port on your display or player. If your project needs pin assignment details, ask the SmartRooms Qatar team before ordering.

How long is the cable, and is 0.5 m enough?

The cable is 0.5 m long, about 50 cm. That length suits two devices that sit next to each other, such as a media player mounted directly beside a display or two units in the same equipment cabinet. It will not reach across a meeting room or from a wall to a distant rack. If your devices are further apart, measure the gap first and ask SmartRooms Qatar whether a longer cable is available.

Which Sony displays or players is it compatible with?

The manufacturer data for this cable does not list compatible models, so this page does not claim compatibility with any specific display, player or signage system. Match the D-Sub 9 end against the port label and audio function in your equipment manual, and check the 3.5mm stereo output on the source. Send the make and model of both devices with your quote request, and the SmartRooms Qatar team will help you confirm the fit before you order.

Can it be used in hot or outdoor locations in Qatar?

The data for this cable gives no operating temperature range and no outdoor rating, so do not treat it as outdoor-rated. Summer temperatures in Qatar regularly exceed 45°C, and a cable in a sun-exposed rooftop enclosure or a glazed lobby may face heat the data does not cover. Keep it inside an equipment cabinet or an air-conditioned room, and confirm the environment with the SmartRooms Qatar team before using it near windows or outdoor signage.

How would a school in Al Wakrah use this cable?

Picture a private school in Al Wakrah fitting out a new media room where a teacher's 3.5mm stereo output must feed a display's D-Sub 9 port. The cable would sit short and tidy inside the lectern or equipment cabinet, keeping clutter out of the teaching space. Before the school orders for several rooms, the facilities team should confirm that each display and source has matching ports, then request one quotation covering all identical setups.

Does a boardroom in West Bay need this cable?

Only if the room's source device has a 3.5mm stereo output and the display uses a D-Sub 9 connection for audio. In a West Bay boardroom, a short 0.5 m link can join a laptop or small media unit to equipment in a nearby credenza, which keeps the table free of loose leads. Walk the room with your AV contractor, note the exact port labels, and send them with your quote request so the cable choice reflects the actual layout.

Would a retail signage installer in Lusail or The Pearl use it?

A retail space in Lusail or The Pearl running a digital signage wall often keeps media players inside a locked cabinet behind the screens. If a player's 3.5mm stereo output has to reach a D-Sub 9 port on the signage equipment, a short cable like this keeps the connection contained inside that cabinet. Plan the cabinet layout before installation, and confirm the cable length against the actual distance between the devices.

Can a government entity buy this on an LPO or through a tender?

Yes. SmartRooms Qatar accepts purchase orders (LPOs) and government tenders, including those on Monaqasat, and payment can be made by bank transfer, cheque or purchase order. For a ministry or public authority ordering this cable alongside displays, list the model code CAB-RSJA1 and the 0.5 m length on the LPO so the items match the quotation. Products are covered by the manufacturer's warranty.

Is the CAB-RSJA1 a current model?

Yes. The manufacturer lists this cable as a current product, so it is not discontinued and can be quoted as a standard item. Current status does not confirm compatibility with your equipment, so the port check remains necessary. When you request a quote, give the model code CAB-RSJA1 and the connector types on site, and the SmartRooms Qatar team will reply with a quotation, usually within one working day.

What warranty applies to this cable?

Products supplied by SmartRooms Qatar are covered by the manufacturer's warranty. The source data for this model does not state a warranty period or terms, so this page does not give a duration. Ask the SmartRooms Qatar team to confirm the warranty terms that apply to CAB-RSJA1 with your quotation, and keep the purchase documents with your equipment records for the installation.

What should I send when requesting a quote?

Send the model code CAB-RSJA1, the quantity, and the make and model of the device at each end of the cable. Include the port labels, the required length if it differs from 0.5 m, and the delivery location, which can be any of the eight municipalities of Qatar. SmartRooms Qatar offers free site surveys, which are useful if the cable must cross between separate cabinets or through walls. Quotations usually follow within one working day.