32TNF5P

What the 32TNF5P is and why its open frame design matters

The LG 32TNF5P is a 32-inch open frame touch display from the Kiosk Touch TNF5P series. It ships as a bare display head with no cabinet, so the kiosk maker or integrator designs the housing, stand or wall mount around it. Its touch function is built into the panel itself instead of relying on an added touch film. That keeps the design slim with a narrow bezel and keeps the image clear, without the milky look that film sensors can cause.

Display, touch and software facts that matter

The 1,920 x 1,080 IPS panel delivers 500 nit brightness, a 1,000:1 contrast ratio and a 178 x 178 degree viewing angle, so people standing beside a kiosk can still read the screen. The colour gamut is NTSC 72% with 16.7 million colours, and the data lists a 9 ms grey-to-grey response and a minimum life of 50,000 hours.

• Touch: up to 10 simultaneous touch points, touch objects from 6 mm, 3.5 mm accuracy and a USB 2.0 touch interface.
• Software: webOS 6.0 runs on the display, with embedded content scheduling, group management, Play via URL, screen rotation and gapless playback.
• Remote management: SNMP, Wake on LAN, fail over, status mailing and HDMI-CEC support.

Connectivity, power and operating conditions

Inputs are two HDMI ports with HDCP 1.4, an RJ45 LAN port, RS232C and IR inputs, and a USB 2.0 Type A port. A USB 2.0 Type B port and an audio output complete the list. The built-in power supply accepts AC 100 to 240 V at 50/60 Hz. Typical draw is 48 W and maximum 65 W, and the energy-saving mode is listed at 34 W.

The operating range is 0°C to 40°C with humidity from 10% to 80%. Qatar summer temperatures can exceed 45°C, so the kiosk should sit in an air-conditioned lobby or an enclosure that keeps the display inside its range. Confirm site conditions with the SmartRooms Qatar team before the enclosure is designed.

Where it fits in Qatar

• Government and visitor services: a check-in or information kiosk in a ministry lobby in Doha, where the slim housing suits a reception counter.
• Healthcare: a patient registration or wayfinding screen in a clinic in Al Sadd, placed in a climate-controlled waiting area.
• Retail and malls: a portrait directory or self-service ordering kiosk in a shopping centre in Lusail or The Pearl, using the screen's portrait orientation.

What to plan before you order

Start with the housing. The head weighs 5.8 kg and measures 723.0 x 419.4 x 39.1 mm, with VESA 200 x 200 mounting holes. Compare the cabinet opening with these figures and with the 45-degree face-up tilt limit. Next, plan the network. The RJ45 port, Wake on LAN and SNMP help if the IT team will monitor several units. Decide on the content source as well, since webOS can run content locally or through SuperSign CMS, SuperSign Cloud or Mobile CMS.

The package includes a 1.55 m power cord, a 1.8 m USB cable, a remote controller with two batteries, the user manual, a quick start guide, an RS232C gender accessory and an IR receiver. SmartRooms Qatar offers a free site survey before installation, quotations usually within one working day, and supply on purchase orders and government tenders, including Monaqasat. Products are covered by the manufacturer's warranty.

To confirm whether the 32TNF5P suits your kiosk design, request a quote from SmartRooms Qatar and include your site, mounting angle and software plan.