Barco
ClickShare Power Supply 100W
Barco ClickShare Power Supply 100W, 100-Watt Video Conferencing Accessory
Ceiling Mount (Black)
Angekis Ceiling Mount (Black) for PTZ Cameras
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Angekis Ceiling Mount in black is an accessory for PTZ cameras, the motorised cameras that pan, tilt and zoom to follow people in a room. Fitting the camera to the ceiling keeps the lens clear of tables and wall displays in meeting rooms, boardrooms and lecture halls. The source data does not list dimensions or compatible camera models, so SmartRooms Qatar confirms fit before quoting. Request a quote and our team will check your camera and ceiling.
What this ceiling mount does
The Angekis Ceiling Mount (Black) holds a PTZ camera on a ceiling rather than on a wall, shelf or table. PTZ cameras can be panned, tilted and zoomed remotely, which lets a video conferencing system follow the active speaker or frame the whole room for participants joining from elsewhere. Mounting the camera overhead keeps the lens clear of furniture, displays and people, and gives remote viewers a consistent view of the room.
The facts that matter before ordering
The manufacturer's data identifies this model as a ceiling mount for PTZ cameras, listed in black and filed under video conferencing accessories. The data we hold does not give dimensions, weight capacity, supported camera models, fixing hardware or cable specifications. Those details decide whether the mount suits your camera and ceiling, so they should be checked before an order is placed.
- Purpose: ceiling installation of PTZ cameras
- Finish: black, as listed for this model
- Category: video conferencing accessory from the Angekis ceiling series
Where it fits in Qatar
A boardroom in a West Bay office tower is a typical use. The camera sits above the table and frames executives and visitors, while the wall stays free for a display or screen. In a lecture theatre at Education City, a ceiling-mounted camera can capture the lecturer and the board without occupying the lectern or the front wall. A training room in Lusail with a single wall display can use the ceiling position to keep the camera out of the presentation area.
What to plan for
- Confirm the exact PTZ camera model and its mounting pattern against this bracket.
- Check the ceiling construction, such as plasterboard, concrete slab or suspended grid, since each needs different fixings.
- Plan the cable route from the camera to the control or network point through the ceiling void.
- Confirm the operating environment. The source data gives no operating temperature or outdoor rating, so do not assume the mount suits covered terraces or unconditioned spaces, where Qatar summer heat can exceed 45°C.
SmartRooms Qatar offers a free site survey, which is useful for checking ceiling access and height before installation. Quotations are usually issued within one working day, and we accept purchase orders and bank transfer, cheque or purchase order payment.
Request a quote
To receive an accurate quotation, send the PTZ camera model, the room type, the ceiling construction and the number of rooms. Our team will confirm fit and return a quote for the Angekis Ceiling Mount (Black), with a lead time that depends on stock and is confirmed in the quotation.
Highlights
- Designed for mounting PTZ cameras on a ceiling
- Listed in black
- Video conferencing accessory from the Angekis ceiling series
- Suits meeting rooms, boardrooms and lecture halls
- Camera compatibility confirmed before quoting
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
Source: manufacturer · checked Oct 2026
The full specification and datasheet for this model are available on request; we send them with your quotation.
Downloads
1 file from the manufacturerQuestions about Ceiling Mount (Black)
What is the Angekis Ceiling Mount (Black) used for?
It is an accessory for fixing a PTZ camera to a ceiling. Overhead mounting suits meeting rooms and lecture halls where tables, screens or wall space would otherwise block the lens. The manufacturer describes it as a ceiling mount for PTZ cameras, so it is not a general-purpose bracket for displays or speakers.
Which cameras does this mount support?
The source data states only that the mount is for PTZ cameras. It does not list compatible camera models, mounting patterns or maximum weight. Before ordering, send the exact camera model to the SmartRooms Qatar team so fit can be checked against the manufacturer's information and an incompatible bracket is not ordered.
What finish does this model come in?
This model is listed in black, and the source data gives no other finish options. If the black finish suits your room and camera, it can be included in your quotation. Tell the team about the room's colour scheme when you request a quote so the choice can be confirmed with the order.
Does the mount work with any ceiling type?
The data does not state supported ceiling types or load ratings. Plasterboard, concrete slab and suspended grid ceilings need different fixings and structural checks. A site survey by SmartRooms Qatar can confirm the ceiling construction and the fixings needed before installation, so the mount is not fitted to a surface that cannot carry it.
Can I mount it outdoors or in a hot space such as a covered terrace?
The source data gives no operating temperature range and no outdoor rating for this mount. Qatar summers can exceed 45°C, and dust storms are common, so do not assume the bracket suits covered terraces, loading bays or unconditioned areas. Confirm the environment with the SmartRooms Qatar team before requesting a quote for any location outside an air-conditioned room.
Is it suitable for a boardroom in a West Bay office tower?
A boardroom is a typical use. A ceiling-mounted PTZ camera sits above the table and frames executives and visitors, leaving the wall free for a display. Before installation, check the ceiling void for access, the room height for the camera's field of view and the cable route from the camera to the control point.
How should I plan the cable route for a ceiling-mounted camera?
Cable requirements are not in our source data for this mount, so check the power and data specification in the camera manufacturer's documentation. Plan the route from the camera position through the ceiling void to the control or network point, and leave access for future maintenance. A site survey helps identify the path and any obstacles in the ceiling.
Would it suit a lecture theatre at Education City?
Yes, a ceiling mount is a practical choice for a lecture theatre because the camera can capture the lecturer and the board without occupying the lectern or the front wall. Confirm the theatre's ceiling height and the camera's zoom range before ordering, since both affect how much of the room the camera covers from the mount position.
Can a school order several mounts for new classrooms by LPO?
Yes. Schools and universities in Qatar can issue a purchase order (LPO) for several rooms, and we accept bank transfer, cheque or purchase order payment. Send the number of classrooms, the camera model for each room and the ceiling type, and we will quote for the full set within one working day, with a lead time confirmed in the quotation.
Do you carry out a site survey before installation?
Yes, SmartRooms Qatar offers a free site survey. For a ceiling-mounted camera, the survey checks ceiling construction, access, height and the cable route, which are the points that determine whether the installation is straightforward. Results are shared before any installation is scheduled, so the quotation reflects the actual site conditions.
Does the mount include a camera?
No. This listing is for the ceiling mount only. The source data does not describe a camera bundle for this model, so if you need a PTZ camera as well, request a quote for the camera separately and include its model in your request so that fit with the mount can be confirmed.
