Biamp
Evoko Kleeo Desk Manager 6-pack + 1yr license
Biamp Evoko Kleeo Desk Manager 6-Pack (910-01972) Desk Booking Display
Apprimo TEC-X 2000
Biamp Apprimo TEC-X 2000 Black Touch Control Pad for Tesira Systems
- Platforms
- TAA Compliant
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Biamp Apprimo TEC-X 2000 Black is a networked touch control pad for Tesira systems, with a 3.8-inch capacitive touch LCD, up to 12 on-screen buttons and power over Ethernet. One CAT5e or CAT6 cable carries both power and control, which suits boardrooms, lecture theatres and hotel meeting rooms in Qatar that need one simple control point. Request a quote for supply, installation and delivery across Qatar.
A touch control pad built around Tesira room control
The Biamp Apprimo TEC-X 2000 Black is a networked touch control pad designed for rooms that run on Biamp Tesira systems. Its 3.8-inch capacitive touch LCD shows up to 12 on-screen buttons, so source selection, volume and other room functions sit on one compact panel near the table or the door. The black finish suits rooms with darker wall panels or graphite furniture; the white model is the alternative for lighter interiors.
Power and cabling that reduce installation work
The unit is powered over Ethernet to IEEE 802.3at Class 3 at 15 W and draws less than 2 W at maximum. A single CAT5e or CAT6 cable carries both power and control, so there is no separate power supply to mount beside the panel. Up to four devices can be daisy chained, which lets one cable run serve several pads in a large room or a set of linked rooms.
Programming and feedback in Tesira software
- Button functions: assigned in Tesira design software, so changes can be made when the room changes.
- Display: high-contrast LCD whose brightness adjusts automatically to ambient light.
- Status light: an RGB LED bar with adjustable brightness that can show mute and system state.
- Protocol: supports all TTP commands.
Where it fits in Qatar
In a boardroom in West Bay, a pad beside the head of the table lets the chair start a hybrid call and adjust audio without leaving their seat. In a university lecture theatre in Education City, a wall-mounted pad at the lectern gives the lecturer one control point for projection and sound. In a hotel meeting room in The Pearl, a pad near the entrance lets event staff reset the room between sessions. The operating range is 0 to 40 °C, so install the unit only in air-conditioned rooms and confirm the environment with the SmartRooms Qatar team before fixing it.
What to plan before installation
Confirm that the network switch port feeding each pad supports PoE to IEEE 802.3at Class 3, and that the Tesira configuration matches the button layout you need. Plan wall box positions at a comfortable reach height and check the cable route for each daisy chained unit, which should not exceed four devices. The unit measures 130 mm high, 90 mm wide and 13 mm deep, and weighs 136 g. It carries a 5-year manufacturer warranty and is TAA compliant, CE marked, UL listed and RoHS compliant. Send us your room plan and SmartRooms Qatar will prepare a quotation for one or several units, with delivery across Qatar and professional installation available. Request a quote and we will usually respond within one working day.
Highlights
- Networked touch control pad for Biamp Tesira systems
- 3.8-inch high-contrast capacitive touch LCD
- Up to 12 on-screen buttons, programmed in Tesira software
- PoE IEEE 802.3at Class 3, 15 W, single CAT5e/CAT6 cable
- Up to four devices can be daisy chained
- 5-year manufacturer warranty; TAA compliant
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
16 specifications · Source: manufacturer · checked Oct 2026
GENERAL5
- Height
- 5.1 inches (130mm)
- Width
- 3.5 inches (90mm)
- Depth
- 0.5 inches (13mm)
- Weight
- 0.3 lbs (136 g)
- Display
- High-Contrast Capacitive Touch LCD Display Size: 3.8” (96 mm) diagonal
POWER3
- Power
- PoE (IEEE 802.3at Class 3, 15W)
- Power Indicator(s)
- RGB LED bar with adjustable brightness
- Power Consumption
- < 2W Max
NOTES1
- Specification Notes
- Daisy Chain Length: 4 devices max
NETWORK1
- Network Connection(s)
- RJ-45 with Ethernet cable (Cat 5e and above)
CERTIFIED SOLUTIONS2
- TAA Compliant
- TAA Compliant
- Certified Solutions
- TAA Compliant
COMPLIANCE1
- Certifications
- FCC Part 15B (USA) CE marked (Europe) UL and C-UL listed (USA and Canada) RoHS Directive (Europe)
ENVIRONMENTAL3
- Ambient Operating Temperature Range
- 32 - 104° F (0 - 40° C)
- Humidity
- 0-95% relative humidity (non-condensing)
- Altitude
- 0-10,000 ft (0-3000m) MSL
Downloads
6 files from the manufacturer
PDF
Biamp Apprimo TEC-X 2000 datasheets (PDF, 367 KB)
PDF
Biamp Apprimo TEC-X 2000 manuals & guides (PDF, 2.1 MB)
PDF
Biamp Apprimo TEC-X 2000 brochures (PDF, 35.2 MB)
PDF
Biamp Apprimo TEC-X 2000 brochures (PDF, 18.4 MB)
RFA
Biamp Apprimo TEC-X 2000 drawings & cad (RFA)
DWG
Biamp Apprimo TEC-X 2000 drawings & cad (DWG)
Questions about Apprimo TEC-X 2000
What is the Biamp Apprimo TEC-X 2000 Black used for?
It is a touch control pad for rooms that run on Biamp Tesira systems. Its 3.8-inch capacitive touch LCD shows up to 12 on-screen buttons that control room functions. It is aimed at boardrooms, lecture theatres and meeting rooms where one simple control point is needed instead of a separate keypad or touch panel for each function.
How does the black model differ from the white TEC-X 2000?
The two models share the same dimensions, display, PoE power, connectivity, certifications and warranty. The difference is the finish. The black model carries item number 920-10862-10000, while the white model is 920-10862-20000. Choose black for rooms with darker wall panels or graphite furniture, and confirm the item number on your quotation.
Does the TEC-X 2000 Black need a separate power adapter?
No separate adapter is needed when the pad is connected through PoE. It is powered to IEEE 802.3at Class 3 at 15 W and draws less than 2 W at maximum. The network switch port must support PoE to that standard. A single CAT5e or CAT6 cable provides both power and network control, which keeps the wiring at the wall simple.
How many pads can be daisy chained together?
Up to four devices can be daisy chained together. This is useful in a large meeting room or a suite of linked rooms where more than one control point is needed. Plan the cable route so that no chain exceeds four units, and confirm the layout with your Tesira configuration before the installation day.
Which network cable should be used for the pad?
The pad connects through an RJ-45 port and needs Ethernet cable rated Cat 5e or higher, and the product description also cites CAT5e and CAT6 for single-cable installation. For a government ministry fit-out in Msheireb, ask the cabling contractor to confirm the cable grade and run lengths in the design stage, so the pads are ready when the room is handed over.
Can button functions be changed after installation?
Yes. The on-screen button functions are programmed in Tesira design software, so the layout can be updated when the way a room is used changes. For a school in Al Sadd that reuses a classroom for different lessons, this means the controls can be reassigned in software rather than replacing the hardware.
Is the pad suitable for rooms without air conditioning?
The ambient operating range is 0 to 40 °C, with humidity from 0 to 95 percent non-condensing and altitude up to 3,000 m. Qatar summer temperatures can exceed 45 °C, so the pad should be installed only in air-conditioned rooms. Do not fix it in unconditioned spaces, and confirm the site conditions with the SmartRooms Qatar team before installation.
Does the display adjust to bright or dim rooms?
Yes. The high-contrast LCD adjusts its brightness automatically to the ambient light level, so on-screen text stays readable in a sunlit room or a dimmed boardroom. The RGB LED bar has adjustable brightness and can show mute and system state, which helps users confirm the status of the room without reading the screen.
Is the TEC-X 2000 Black compliant for public sector purchases?
The unit is TAA compliant, which is a US federal procurement requirement, and it also carries CE marking, UL listing, RoHS compliance and FCC Part 15B. For Qatari government tenders, including those on Monaqasat, SmartRooms Qatar can list the certification details in the quotation so the evaluation committee has the documents it needs.
What warranty does the TEC-X 2000 Black carry?
The product carries a 5-year manufacturer warranty. SmartRooms Qatar supplies the unit under that manufacturer warranty, and the quotation will confirm the warranty terms that apply to your order. Keep the purchase documents with your asset records, as they may be needed for any warranty claim.
Can a school or ministry buy this pad through a purchase order?
Yes. SmartRooms Qatar accepts purchase orders (LPOs), government tenders including Monaqasat, and payment by bank transfer, cheque or purchase order. An LPO works well when a school or ministry orders several pads for a set of rooms, because the quantities, item numbers and delivery to all eight municipalities can be listed on one quotation.
How should the pad be mounted, and does it need a site survey?
The pad is wall mountable and measures 130 mm high, 90 mm wide and 13 mm deep, weighing 136 g. Choose a height that suits the typical user and plan the wall box position before installation. SmartRooms Qatar offers a free site survey, which is useful for checking cable routes and reach height in older buildings before fixing the units.
Similar models
Biamp
Evoko Liso Freestand Mount - Boltable
Biamp Evoko Liso Freestand Mount (Boltable) 910-01935 Floor Stand
