Barco
ClickShare Power Supply 100W
Barco ClickShare Power Supply 100W, 100-Watt Video Conferencing Accessory
Devio DPA-450BP
Biamp Devio DPA-450BP Four-Channel PoE+ Amplifier for UCX Rooms
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Biamp Devio DPA-450BP is a four-channel PoE+ amplifier built for Devio UCX meeting room audio systems. It powers distributed loudspeakers so that sound stays consistent across the room, and it ships with BPAK hardware for Desono C-IC6 mounting. It suits boardrooms, training rooms and conference rooms in Qatar that are being fitted out around a Devio UCX system. Request a quote to specify it for your rooms.
What the DPA-450BP does in a Devio UCX room
The Biamp Devio DPA-450BP is a four-channel amplifier with PoE+ power, designed to run the room audio of a Devio UCX meeting system. Instead of relying on one loudspeaker at a single point, a UC room can use distributed loudspeakers, and this amplifier supplies the drive for them. The result is more even sound for people seated at different distances from the speakers, which matters in busy meeting rooms in Doha and Lusail where remote callers need to hear everyone clearly.
The facts that matter for your design
- Four channels in one amplifier unit, for distributed loudspeaker layouts.
- PoE+ powered, so power and connectivity run through the network cabling of the UCX system.
- BPAK hardware included for Desono C-IC6 mounting, which simplifies the speaker fixing stage.
- Built for Devio UCX, and the manufacturer states that no Tesira is required.
These points are the reason to specify the DPA-450BP rather than a general-purpose amplifier. It is matched to one ecosystem, which keeps the design decisions narrower for your installer and makes the room easier to document.
Where it fits in Qatar
Three situations show how this amplifier is typically used.
- A corporate boardroom in West Bay running hybrid meetings with teams in Europe and Asia, where the far end must hear the room clearly.
- A university in Education City standardising its meeting rooms across several floors, repeating the same UCX-based audio design in each room.
- A government office in Msheireb upgrading small conference rooms where Arabic and English speakers join the same call.
In each case the amplifier is one part of a Devio UCX room, so agree the full scope with SmartRooms Qatar before ordering and confirm the complete bill of materials for the room.
What to plan before ordering
Map the loudspeaker positions and the Desono C-IC6 mounting points before the order is placed, so the included BPAK hardware fits your ceiling layout. Note the cable route from the network switch to each speaker location, and confirm that the switch port can supply PoE+. SmartRooms Qatar offers a free site survey, which is worth booking for rooms with awkward ceiling heights or tight service voids. Professional installation is also available, and quotations are usually issued within one working day.
Ordering for several rooms
Schools, universities and public bodies often equip several meeting rooms in one project. For multi-room orders, SmartRooms Qatar accepts purchase orders (LPOs) and government tenders, including Monaqasat, with payment by bank transfer, cheque or purchase order. Products are covered by the manufacturer's warranty.
Ready to specify the Devio DPA-450BP for your meeting rooms? Request a quote from SmartRooms Qatar and include the number of rooms, the number of Desono C-IC6 units and your network switch details.
Highlights
- Four-channel PoE+ amplifier for Devio UCX room audio
- Distributed loudspeaker amplification for UC meeting rooms
- BPAK hardware included for Desono C-IC6 mounting
- Power and connectivity streamlined through the UCX ecosystem
- Manufacturer states no Tesira is required
- Item number 910-00026
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
Source: manufacturer · checked Oct 2026
The full specification and datasheet for this model are available on request; we send them with your quotation.
Downloads
1 file from the manufacturerQuestions about Devio DPA-450BP
What is the Biamp Devio DPA-450BP used for?
It is a four-channel PoE+ amplifier that drives distributed loudspeakers in a Devio UCX meeting room audio system. Rather than placing one loudspeaker at a single point, the room is covered by several loudspeakers driven from this unit. That helps keep in-room audio consistent for participants seated across a boardroom or training room, and it is intended for UC meeting rooms.
Who is this amplifier designed for?
It suits organisations in Qatar that run or plan Devio UCX meeting room systems, such as corporate boardrooms, government conference rooms, university meeting rooms and training rooms. If your room already uses a Devio UCX setup, or you are specifying one, this amplifier is matched to that ecosystem. Confirm the design with SmartRooms Qatar before ordering.
How many channels does the DPA-450BP have?
The DPA-450BP has four amplifier channels in one unit. Each channel can drive one of the distributed loudspeakers in a room layout. For a meeting room with speakers at several ceiling positions, a single four-channel unit can cover the layout, provided your system design calls for four channels. Your SmartRooms Qatar team can check the channel count against your floor plan.
Does the DPA-450BP need a Tesira DSP?
No. According to the manufacturer's data, the DPA-450BP is built for Devio UCX room deployments and no Tesira is required. This matters for a Qatar project where the design team wants a UC room audio chain built around a single ecosystem. Your SmartRooms Qatar team can confirm the full system components when you request a quote.
Is the DPA-450BP powered over Ethernet?
Yes, it is a PoE+ amplifier, so power and connectivity are streamlined through the network cabling of the UCX system. Before ordering, confirm that the network switch port serving the amplifier can supply PoE+. Plan the cable route from the switch to each loudspeaker location, so the installer can run one network connection per amplifier.
What mounting hardware comes with the DPA-450BP?
BPAK hardware for Desono C-IC6 mounting is included with the DPA-450BP. That means the mounting hardware for the C-IC6 loudspeakers is supplied with the amplifier, so your installer does not need to source it separately. Confirm the number of C-IC6 units in your design when you request a quote, so the hardware matches the room.
How would the DPA-450BP work in a West Bay boardroom?
Consider a boardroom in West Bay with a long table and a video conferencing setup at one end. A distributed loudspeaker layout driven by this four-channel amplifier helps remote participants hear people at the far end of the table clearly. Before installation, a SmartRooms Qatar site survey can measure the room dimensions, ceiling positions and cable routes.
Is it suitable for a large lecture hall at a university?
The stated primary application is meeting and conference AV, and the amplifier is built for Devio UCX meeting room systems. It is therefore aimed at smaller UC rooms such as boardrooms, huddle rooms and seminar rooms. For a large lecture hall in Education City or elsewhere, ask SmartRooms Qatar whether a different amplifier is needed before you specify this unit.
Can the DPA-450BP be used outdoors or in a hot, dusty lobby?
The source data does not give an operating temperature or environmental rating for the DPA-450BP, so it cannot be confirmed for outdoor or dusty areas. The product is aimed at meeting rooms. Qatar summers exceed 45°C and dust storms are common, so confirm the installation environment with the SmartRooms Qatar team before specifying it for any location outside a meeting room.
How should we plan the installation of this amplifier?
Start with a site survey that records loudspeaker positions, the cable route from the network switch and the Desono C-IC6 mounting points. SmartRooms Qatar offers free site surveys and professional installation. Share the survey results with the installer and agree the ceiling and cabling work before equipment is delivered, so the room is ready when the unit arrives.
Can we order this amplifier for several meeting rooms at once?
Yes. Multi-room projects are common in schools, universities and public bodies. SmartRooms Qatar accepts purchase orders (LPOs) for these projects, and government tenders can be submitted through Monaqasat. Send the number of rooms and the Desono C-IC6 count with your request, and the quotation can be issued for the whole project, usually within one working day.
Is the DPA-450BP covered by a warranty?
Products supplied by SmartRooms Qatar are covered by the manufacturer's warranty. The source data for the DPA-450BP does not state the warranty term, so ask for the quotation to confirm the warranty terms that apply. Payment can be made by bank transfer, cheque or purchase order, and your quotation will list the item number 910-00026.
