Logitech Mic Pod Mount · Price in Qatar

Name: Logitech Mic Pod Mount Table and Ceiling Mount for Rally Mic Pod
Brand: Logitech
SKU: logitech-mic-pod-mount
Availability: InStock

Overview

The Logitech Mic Pod Mount is a table and ceiling bracket for the Rally Mic Pod, available in white or graphite. It holds the pod in place and routes cables through grommet holes from 25 to 65 mm, with table thicknesses from 20 to 50 mm supported. It suits meeting rooms, classrooms and multipurpose spaces in Qatar where a tidy, fixed microphone position matters. Request a quote.

What the Mic Pod Mount does in a meeting room

The Logitech Mic Pod Mount is a fixing accessory for the Rally Mic Pod. Left loose on a table, a microphone pod can slide, get knocked during a discussion, or leave cables trailing across the surface. The mount holds the pod in one fixed position, so the microphone stays where it was set up for every meeting and the cabling stays neat.

It is sold in two colours: white (part number 952-000020) and graphite (part number 952-000002). Choose the finish that matches your table top, desk edge or ceiling tiles so the equipment looks planned rather than improvised.

Cable routing and table fit

The mount routes cables through grommet holes from 25 to 65 mm in diameter and adjusts to tables from 20 to 50 mm thick. These two measurements decide whether the mount suits a room, so measure the grommet and the table edge before ordering. A cable spool is included to take up spare cable length, which keeps the run tidy under the table.

The base measures 146 mm by 146 mm and stands 22 mm high without the threaded rod, or 90 mm high with it attached. Check the clearance under the table or above the ceiling before fitting.

Where it fits in Qatar

In a boardroom in West Bay or Msheireb, a fixed mount keeps the microphone in place during long sessions with visiting delegations, when people reach across the table and move papers about. In a government office or energy company in Mesaieed, a meeting room with a fixed table can achieve a finished look without a full refit.

Schools and training centres in Education City or Al Sadd often need rooms that change between lectures, workshops and group work. Because the mount can also be fixed to a ceiling, a hall or classroom can keep its microphone position when the furniture is rearranged. A hotel meeting room in Lusail or The Pearl, which is reset between events, gains the same benefit: the microphone stays connected while tables are moved.

What to plan before you order

Confirm the table thickness falls within 20 to 50 mm.
Check that the grommet hole sits between 25 and 65 mm.
Decide on a white or graphite finish for each room.
Plan ceiling fixing points after checking the structure above.

The box includes a mount cup, threaded rod, nut, cable spool, mounting plate, screws and documentation. For a ceiling installation, ask SmartRooms Qatar for a free site survey to confirm the fixing point and clearance before any work starts. Our team can also review room conditions, such as heat near windows, before equipment is placed.

Ready to fit a Logitech Mic Pod Mount to your tables or ceilings? Request a quote and tell us how many rooms you are equipping and which finish you need. Quotations are usually issued within one working day.

Highlights

Fixes the Rally Mic Pod to a table or ceiling
Grommet holes from 25 to 65 mm in diameter
Adjusts to table thickness from 20 to 50 mm
Available in white (952-000020) or graphite (952-000002)
Includes cable spool, threaded rod and mounting plate
Base measures 146 mm by 146 mm

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

11 specifications · Source: manufacturer · checked Oct 2026

Part Number2

Graphite: 952-000002
White: 952-000020

Dimensions - With Threaded Rod Attached3

Height: 90 mm
Width: 146 mm
Depth: 146 mm

Dimensions - Without Threaded Rod3

Height: 22 mm
Width: 146 mm
Depth: 146 mm

Technical Specifications - Compatible devices3

Items: Rally Mic Pod
Table Thickness: 20-50 mm
Grommet Hole Diameter: 25 - 65 mm

Downloads

2 files from the manufacturer

PDF Datasheets rally-accessories-datasheet.pdf 2.3 MB PDF Manuals & guides mic-pod-mount-qsg.pdf 1.1 MB

Questions about Mic Pod Mount

Which devices work with the Mic Pod Mount?

The Mic Pod Mount is built for the Rally Mic Pod, and the manufacturer lists no other compatible devices. If your room uses different microphones, send your device list with a quote request so the SmartRooms Qatar team can check the fit before a purchase order is raised. This stops a meeting room from ending up with mounts that do not match its hardware.

What colours are available?

The mount comes in white (part number 952-000020) or graphite (part number 952-000002). Pick the finish that matches your table top or ceiling tiles. When a school or ministry is fitting out several rooms in one building, using the same colour across all of them gives a consistent look, so decide the finish before requesting a quote.

What table thickness does it accept?

The mount adjusts to table thicknesses from 20 to 50 mm. A 40 mm conference table in an office in Al Khor would suit it, while a table thicker than 50 mm falls outside the range. Measure the thickest point of the table edge where the mount will sit, and include that measurement when you request a quote.

What grommet hole size is needed?

Cables route through grommet holes from 25 to 65 mm in diameter. Measure the existing hole before ordering. If it falls outside that range, the SmartRooms Qatar team can review the layout during a free site survey before any work is planned, so you avoid buying mounts for a table that will not fit.

Can the Mic Pod Mount be fixed to a ceiling?

Yes. The mount can be fixed to a table or a ceiling, which suits multipurpose halls, classrooms and reconfigurable spaces. A hall in an Al Wakrah school that is rearranged for assemblies and exams can keep its microphone position while the furniture moves. Confirm the ceiling structure and fixing points with a site survey first.

What is included in the box?

The box includes a mount cup, a threaded rod, a nut, a cable spool, a mounting plate, screws and documentation. Check the contents against your order when they arrive. For projects with several rooms, ask for a quote that lists the quantity of each colour so the purchase order matches what each room needs.

What are the dimensions of the mount?

With the threaded rod attached, the mount measures 90 mm high, 146 mm wide and 146 mm deep. Without the threaded rod, it is 22 mm high and keeps the same width and depth. Check the space under the table or above the ceiling before fixing it, especially where the cable spool sits near other equipment.

Is it suitable for a boardroom in a government building in Msheireb?

It suits a fixed boardroom table where the microphone must stay in place through long sessions, such as meetings with delegations from abroad. The mount keeps the pod steady while people reach across the table, and the cable spool helps keep wiring tidy beneath it. Government buyers can order through an LPO or respond to tenders on Monaqasat.

How does it help a university or training centre in Education City?

Classrooms and training rooms in Education City are often rearranged between lectures, workshops and group work. The mount can go on the table or the ceiling depending on the layout, so the microphone position holds when furniture moves. Tidy cabling also reduces trip hazards for students and instructors moving between seats during sessions.

Is it worth fitting in a hotel meeting room in West Bay?

Yes, particularly for meeting rooms that are reset between events. The mount holds a Rally Mic Pod in one place and keeps cables off the table surface, so the room looks finished for guests. Ask for a quote with your room sizes and table thickness so the team can confirm the fit before you commit.

Do I need a site survey before installing?

A site survey is recommended, especially for ceiling fixing or for tables close to the edges of the 20 to 50 mm thickness range. SmartRooms Qatar offers free site surveys, and quotations are usually issued within one working day once the details are confirmed. Surveys help confirm the grommet size and the clearance under the table.

Can a school or government office order several mounts with an LPO?

Yes. SmartRooms Qatar accepts purchase orders (LPOs) and government tenders, and takes payment by bank transfer, cheque or purchase order. Deliveries cover all eight municipalities of Qatar. Include the colour, quantity and room list in your quote request so the purchase order reflects exactly what each room needs.