Rally AI Camera Pro

A PTZ camera for rooms where people sit far apart

The Logitech Rally AI Camera Pro is a pan-tilt-zoom camera built for meeting spaces where the furthest seat is a long way from the lens. Its dual-camera design pairs an optical camera with 15x zoom and a second camera fitted with a one-inch sensor, so the image stays sharp whether a presenter stands at the screen or a participant sits at the far end of the table. The diagonal field of view is 90 degrees.

• Zoom: 15x in total, made up of 5x optical and 3x digital.
• Field of view: 90 degrees diagonal, 82 degrees horizontal and 52 degrees vertical.
• Movement: pan of ±90 degrees and tilt from +50 to –90 degrees.
• Video: 4K at 30 fps, with 1440p, 1080p, 900p, 720p and SD modes.

AI framing, audio and remote management

RightSight 2 AI framing directs the camera toward each active participant or presenter, so the shot follows the conversation instead of staying fixed. The USB audio processing combines beamforming with direction of arrival, and that data is used to guide camera framing. The microphone array uses eight omni-directional digital MEMS elements, samples at 48 kHz and responds from 90 Hz to 16 kHz.

The camera connects over USB 3.2 Gen 1 and supports Wi-Fi 802.11 a/b/g/n/ac/ax alongside Bluetooth Low Energy 5.3. Logitech Sync allows an IT team to monitor, manage and update it together with other room devices from one interface. It pairs with the Logitech Rally system for audio, and the manufacturer lists Biamp, Q-SYS and Shure among its pro audio partners. Check the latest compatibility information before you specify an audio chain.

Planning power, cabling and heat in Qatar

The package includes a power supply with a 100–240V operating range, a 1 m AC cable, a 2 m USB-C to USB-C cable, a 3 m CAT6a cable, a mounting plate, mounting hardware and a cable guide. The power is listed as PoE++, so confirm that your network switch or injector provides it before ordering. The operating range is 0 to 35°C at 10 to 95% humidity, and storage is rated from –40 to 70°C.

Qatar summer temperatures can exceed 45°C, so install the camera in an air-conditioned room, away from direct sun through windows. Heat output is listed at 34 BTU/hr idle and 68 BTU/hr during a meeting, and facilities teams should include the meeting figure in the room's cooling load. The lens depth is 113 mm, so allow clearance behind the mounting position.

Where it fits across Qatar

Three typical deployments show where this camera earns its place:

• A ministry boardroom in West Bay, where senior officials sit around a long table and join calls with colleagues abroad.
• A university lecture theatre in Education City, where the lecturer moves across the front of the room and remote students need a clear view.
• A hotel or event meeting space in Lusail, where the room is reconfigured for groups of different sizes.

Planning your installation

Mounting position decides framing quality. Measure the distance to the furthest seat, confirm the ceiling or wall can carry the mount, and plan the cable route for the 3 m CAT6a run. SmartRooms Qatar offers free site surveys and professional installation, so sight lines can be checked before any work starts. Request a quotation and we will usually respond within one working day.