Barco
ClickShare Power Supply 100W
Barco ClickShare Power Supply 100W, 100-Watt Video Conferencing Accessory
Rally AI Cameras Extension Kit
Logitech Rally AI Cameras Extension Kit (952-000332)
- Platforms
- Rally AI Camera
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Logitech Rally AI Cameras Extension Kit lets Rally AI Camera and Rally AI Camera Pro units sit up to 100 metres from their host over CAT6A cabling, with a USB-C link and two RJ45 ports on each side. It suits boardrooms, lecture theatres and halls in Doha, West Bay or Education City where the camera must sit far from the computer or codec. Request a quote from SmartRooms Qatar.
What the Rally AI Cameras Extension Kit does
The Logitech Rally AI Cameras Extension Kit is a USB extender for the Rally AI Camera and the Rally AI Camera Pro. It carries the camera's connection up to 100 m from its host device over CAT6A cabling, so the camera can be placed where the room needs it while the computer or conferencing codec stays in a cabinet, rack or back office. Without an extender, the camera has to sit close to its host, which limits where it can be mounted in a large or irregularly shaped room.
Connection details for installers
- Maximum reach: 100 m between camera and host, using CAT6A cable.
- Camera side ports: one USB-C and two RJ45.
- Host side ports: one USB-C and two RJ45.
- Camera side size: 72 mm high, 211 mm wide and 20 mm deep.
- Host side size: 68 mm high, 120 mm wide and 20 mm deep.
- Compatible cameras: Rally AI Camera and Rally AI Camera Pro.
Measure the full cable path before ordering, not the straight-line distance. Vertical drops, bends, slack at each end and any passage through trunking all count against the 100 m limit, so the figure on your survey should be the real route length.
What arrives in the box
The kit includes mounting hardware, user documentation and a graphite device cosmetic sleeve, which matches the Graphite finish of this model. Three 6-inch cables are supplied: USB-C, CAT6A and USB-C to A. Because those cables are short, check the length you need for each run and plan the remaining cabling around the actual route.
Where it fits in Qatar
Three common room types show why the reach matters:
- A boardroom in Msheireb or West Bay where the codec sits in an equipment cupboard and the camera must frame the table from a wall position.
- A school hall in Al Wakrah or Al Rayyan with the camera on a stage wall and the computer at the back of the room.
- A lecture theatre in Education City where the camera is mounted high on the front wall and the host sits in a rear control room.
Training rooms in the Industrial Area or Mesaieed follow the same pattern when a fixed camera at the front of the room connects to a host PC in a rear cabinet.
Planning the installation
Start with a site survey that records the camera position, the host location, the route between them and the height of each mount. The source data does not list an operating temperature range or environmental rating for this kit. Summer temperatures in Doha can pass 45°C, so confirm room conditions, ventilation and any sun exposure with the SmartRooms Qatar team before fixing equipment, especially in rooms with large windows or dust-prone areas.
Also allow access for future servicing, and keep the CAT6A run clear of power cabling where the route allows. Request a quote with the camera model, the room layout and the estimated cable length, and SmartRooms Qatar will confirm the kit, the cabling and the installation plan for your room.
Highlights
- Extends Rally AI Camera or Rally AI Camera Pro up to 100 m
- CAT6A cable connection between camera and host
- USB-C and two RJ45 ports on each side
- Compatible with Rally AI Camera and Rally AI Camera Pro
- Camera side 72 x 211 x 20 mm; host side 68 x 120 x 20 mm
- Ships with graphite cosmetic sleeve and three 6-inch cables
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
14 specifications · Source: manufacturer · checked Oct 2026
Part Number1
- Items
- 952-000332
Dimensions - Camera Side3
- Height
- 72 mm
- Width
- 211 mm
- Depth
- 20 mm
Dimensions - Host Side3
- Height
- 68 mm
- Width
- 120 mm
- Depth
- 20 mm
Technical Specifications - System Requirements1
- Compatibility
- Rally AI Camera, Rally AI Camera Pro
Technical Specifications - Ports & Interfaces4
- Camera Side USB
- 1x USB-C
- Camera Side RJ45
- 2x RJ45
- Host Side USB
- 1x USB-C
- Host Side RJ45
- 2x RJ45
Technical Specifications - General Specifications2
- Extension cable type
- CAT6A
- Extension cable max distance
- 100m
Downloads
1 file from the manufacturerQuestions about Rally AI Cameras Extension Kit
What is the Logitech Rally AI Cameras Extension Kit for?
It is a USB extender that lets a Rally AI Camera or Rally AI Camera Pro sit up to 100 m from its host device, linked by CAT6A cable. Use it when the camera must go on a distant wall or ceiling while the host computer or codec stays in a cabinet or rack elsewhere. It suits meeting rooms, boardrooms and halls where the room layout, rather than the equipment location, decides where the camera goes.
Which cameras does the kit work with?
The kit is listed for two cameras only: the Rally AI Camera and the Rally AI Camera Pro. It is not listed for other camera models, so check the model before ordering. If you are adding the kit to cameras already fitted in a room, send the model details when you request a quote and SmartRooms Qatar will confirm compatibility before the order is confirmed.
How far can the camera be from the host device?
Up to 100 m, using CAT6A cable between the two units. Measure the actual route through ceiling voids, trunking and cable trays rather than the straight-line distance, and leave slack at both ends. A route that runs around a steel column or through several bends uses more of the available length than a direct run, so the site survey should record every bend.
What ports does each side of the kit have?
The camera side and host side each have one USB-C port and two RJ45 ports. The box includes 6-inch USB-C, CAT6A and USB-C to A cables for short connections. Check which port each cable uses against the installation drawing before the cable runs are pulled, so the camera and host connect correctly.
What is included in the box?
The kit includes the extension units, mounting hardware, user documentation, a graphite device cosmetic sleeve, a 6-inch USB-C cable, a 6-inch CAT6A cable and a 6-inch USB-C to A cable. The listed finish is Graphite, so the sleeve matches this variant. Check the contents on delivery against your order before installation starts.
What are the dimensions of each unit?
The camera side measures 72 mm high, 211 mm wide and 20 mm deep. The host side measures 68 mm high, 120 mm wide and 20 mm deep, so it is the smaller unit and fits more easily in a rack, cabinet or equipment shelf. Measure the space behind a display or under a table before fixing the units, and allow room for the cables to leave cleanly.
Can the kit be used in a hot, dusty room in Doha in summer?
The source data does not state an operating temperature range or environmental rating for this kit, so this page cannot confirm one. Summer temperatures in Doha can exceed 45°C, so do not assume the equipment suits rooms with sun-facing glazing, outdoor spaces or unventilated areas. Ask the SmartRooms Qatar team to confirm room conditions and ventilation before installation.
Is it suitable for a boardroom in Msheireb where the codec is in a cupboard?
Yes, this is the situation the kit is built to address. Place the Rally AI Camera at the front of the boardroom on a wall or ceiling position that frames the whole table, then run CAT6A to a host device in the cupboard. Keep the cable route away from electrical cables where possible, and record the run length in the site survey so the cable reaches the cupboard without strain.
Would it work for a school hall in Al Wakrah with the camera on a stage wall?
It works well when the route stays within the 100 m limit. Hall routes usually follow walls or ceiling voids, so plan the cable path with the school's facilities team before ordering. A private school fitting out its hall in phases should request a quote early, so the installation can be scheduled around the timetable.
Can it support a lecture theatre in Education City where cameras sit high on the wall?
Lecture theatres often mount the camera high on the front wall, so the cable run to a host in a rear control room can be long. The 100 m maximum gives room for that route, and CAT6A carries the connection between the two units. Ask for a site survey to confirm the mounting height, the route and the position of the host device before buying.
Is it practical for a training room in the Industrial Area or Mesaieed?
Training rooms with a fixed camera at the front and a host PC at a rear desk or cabinet suit this kit well. Choose a route that avoids moving furniture, and protect the CAT6A run in trunking where people walk. If the room is in the Industrial Area or Mesaieed, confirm dust levels with the team, since the data gives no environmental rating for the kit.
How do I order and have it installed through SmartRooms Qatar?
Request a quote with the camera model, the room layout and the estimated distance between camera and host. Quotations are usually issued within one working day. SmartRooms Qatar offers free site surveys, professional installation and delivery to all 8 municipalities of Qatar. Purchase orders (LPOs), government tenders and payment by bank transfer, cheque or purchase order are accepted.
