Barco
ClickShare Power Supply 100W
Barco ClickShare Power Supply 100W, 100-Watt Video Conferencing Accessory
Rally Camera Extension Kit
Logitech Rally Camera Extension Kit 952-000217 Cable Extender
- Platforms
- version 10 and higher
- Connectivity
- Camera Side Base: VESA: 75 x 75 mm
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Logitech Rally Camera Extension Kit (952-000217) lets you position a Rally Camera up to 100 metres from its control box over one Cat5e or better cable. The graphite kit includes a camera side base, control box, twist-to-lock mounting plate, power adapter with regional plugs and a 2 m USB-C cable. It suits boardrooms, lecture halls and training rooms across Qatar where the camera must sit away from the table.
What the Rally Camera Extension Kit does
The Logitech Rally Camera Extension Kit, model 952-000217, is a cabling accessory for the Logitech Rally Camera. It splits the setup into two parts: a camera side base that carries the camera, and a control side box that sits where your laptop or meeting equipment is. The two parts are linked by a single Cat5e or better cable, so the camera can sit up to 100 metres from the control box instead of being limited to the length of a standard camera cable.
In practice this means the camera can be placed on a stand, a wall bracket or a table mount where it captures the whole room, while the control box stays at the desk, the AV cabinet or the lectern PC.
Cabling, power and connections that matter
- Cabling: Cat5e or better, with a cable diameter up to 7.4 mm and runs of up to 100 m. Usable length depends on the cable, so test the route before installation.
- Control side box: a rear USB-C port to the user device, a DC power input, a reboot button, an LED status indicator, built-in cable retention and two mounting through-slots.
- Camera side base: an integrated USB-C cable to the Rally Camera, an RJ45 connection to the control box and an LED status indicator.
- Power: the adapter accepts 100-240V and outputs 48V at 1.0A, with a 1.5 m DC cable and regional plugs supplied.
- Included cables: a 2 m USB-C to USB-C 2.1 cable, a USB-C to USB-A 2.1 adapter and a 5/8-27 to 1/4-20 threaded adapter.
Where it fits in Qatar
A boardroom in West Bay or Msheireb often has a long table and a presenter who stands near a screen. Here the camera can sit at the far end of the room or on a wall bracket behind the presenter, while the control box is kept near the room PC. The cable run can be routed through a ceiling void or cable tray rather than across the floor.
A lecture hall in Education City or a training centre in Al Sadd can place the camera at the back of the room so both the lecturer and the front screen are visible to remote participants. A ministry meeting room in Doha, where the desk sits to one side, can use the extra reach to frame everyone seated at the table.
What to plan before you install
Measure the distance from the camera position to the control box and note where the power socket and the user device will sit. Check that the cable is Cat5e or better and that the wall or stand can hold the camera base and the mounting plate, which together weigh about 298 g. Floor-level and ceiling-level routes both need a clear path for the cable and its retention point.
SmartRooms Qatar offers free site surveys and professional installation, and quotations are usually issued within one working day. Send your room dimensions, cable route and the Rally Camera model to the team and request a quote for the 952-000217 kit.
Highlights
- Up to 100 m camera reach over one category cable
- Cat5e or better cable with diameter up to 7.4 mm
- Compatible with Windows 10 and higher, and two latest macOS versions
- Power adapter input 100-240V, outputs 48V at 1.0A
- Twist-to-lock mount plate, VESA 75 x 75 mm and tripod threads
- Graphite finish with control box reboot button and LED
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
22 specifications · Source: manufacturer · checked Oct 2026
Part Number1
- Items
- 952-000217
Dimensions - Camera Side Base3
- Height
- 31.5 mm
- Weight
- 255.8 g
- Diameter
- 153.3 mm
Dimensions - Control Side Box4
- Height
- 22.8 mm
- Width
- 117.2 mm
- Depth
- 134.7 mm
- Weight
- 137.5 g
Dimensions - Twist-to-Lock Mount Plate3
- Height
- 18.6 mm
- Weight
- 42.1 g
- Diameter
- 137.6 mm
Technical Specifications - System Requirements2
- Compatibility
- Windows: version 10 and higher, macOS: two most recent versions, USB 2.0 compatible devices
- Category Cable
- Cat5e or better with cable diameter up to 7.4 mm, up to 100 meters in length. Performance and length supported will vary by cable.
Technical Specifications - Ports & Interfaces4
- Camera Side Base
- Integrated USB-C cable (from Camera Side Base to Rally Camera), RJ45 to Control Side Box, LED status indicator
- Control Side Box – Front
- Reboot button, LED status indicator
- Control Side Box – Rear
- USB-C (from Control Side Box to user device), RJ45 to Camera Side Base, DC power connection, Built-in cable retention, Mounting slots
- Mounting interfaces
- Camera Side Base: VESA: 75 x 75 mm, Tripod: ⅝-27 and ¼-20, Twist-to-lock for mounting directly to twist-to-lock mounting plate; Control Side Box: 2 mounting through-slots for mounting directly to the wall, table, or shelf
Technical Specifications - Electrical & Environmental5
- Power supply (included)
- 68.9 x 33.9 x 71.3 mm
- Operating voltage/power
- 100-240V, 48V, 1.0A
- DC cable
- 1.5 m
- USB-C to USB-C 2.1 Cable
- 2 m
- USB-C to USB-A 2.1 Adapter
- 37 mm
Downloads
1 file from the manufacturerQuestions about Rally Camera Extension Kit
What is the Logitech Rally Camera Extension Kit used for?
It moves the Rally Camera away from its control unit so the camera can be placed where it captures speakers and presentations best. The kit links the camera and a control side box with one Cat5e or better cable, up to 100 metres long. It suits meeting rooms, boardrooms and lecture spaces where the default camera position does not frame the room well.
How far can the camera sit from the control side box?
The category cable run can be up to 100 metres. The cable must be Cat5e or better with a diameter up to 7.4 mm. Performance and usable length vary by cable, so confirm the cable type and check the run before installation. SmartRooms Qatar can advise on the route for your room in Doha or elsewhere in Qatar.
What network cable do I need for the kit?
Use Cat5e or better cable with a diameter up to 7.4 mm. Runs of up to 100 metres are supported, but the usable length depends on the specific cable. Test the run during installation, before the room is used for meetings or lessons, so you know the link is stable at the planned distance.
Which computers and systems work with the kit?
The kit supports Windows 10 and higher, the two most recent versions of macOS, and USB 2.0 compatible devices. The control side box connects to your user device through its rear USB-C port. The package includes a 2 m USB-C to USB-C cable and a USB-C to USB-A adapter, so check your laptop ports before ordering.
Does the power adapter work with Qatar's 240 V supply?
The power adapter's input is rated 100-240V, so it covers Qatar's 240 V mains supply, and it ships with regional plugs. The adapter outputs 48V at 1.0A to the control side box through a 1.5 m DC cable. Before installation, confirm that the supplied plug fits the BS 1363 sockets in your room and plan a socket close to the control box.
How do I mount the camera side base?
The camera side base has a VESA pattern of 75 x 75 mm, tripod threads of 5/8-27 and 1/4-20, and a twist-to-lock fitting for the included mounting plate, which measures 137.6 mm in diameter. A 5/8-27 to 1/4-20 threaded adapter is included. Choose the option that suits your stand, bracket or table, and check that the surface can hold the base and plate.
Can the control side box sit on a shelf inside an AV cabinet in a small meeting room?
Yes. The control side box has two mounting through-slots for fixing to a wall, table or shelf, and built-in cable retention to keep the cable secure. It measures 117.2 mm wide, 134.7 mm deep and 22.8 mm high, and weighs 137.5 g. For a small meeting room in Al Khor or Umm Salal, check that the shelf has space for the box, the adapter and the cable bend.
How should a West Bay boardroom plan the camera position?
Position the camera so it can see every seat at the table and the presenter's screen, then run the cable to a control box near the room's computer. Because the kit reaches 100 metres, the camera can sit at the far end of a long boardroom table or on a wall bracket behind the presenter, without moving the computer. Measure the route first and include it with your quotation request.
Is this kit suitable for a lecture theatre at Education City?
It suits lecture spaces where the lecturer works from a front desk but the camera must capture the room from a fixed point. The camera side base can sit on a tripod or stand, while the control box stays at the lectern PC. For a large hall, plan the cable route and confirm cable quality over the full length, because usable distance depends on the cable.
Can a training centre in Al Sadd use the kit for hybrid sessions?
Yes. A training centre can place the camera at the back of a classroom so trainees and the trainer are both visible to remote participants, while the control box connects to the instructor's laptop by USB-C. The kit works with Windows 10 and higher and the two most recent macOS versions. Confirm the operating system of the training computers before ordering.
How would a school in Al Rayyan order kits for several classrooms?
A school can send a purchase order (LPO) to SmartRooms Qatar, which supplies the kits, delivers them to all eight municipalities of Qatar and arranges professional installation. Each classroom needs its own kit and cable route, so list the room names, distances and socket positions with the order. Quotations are usually issued within one working day, and payment can be made by bank transfer, cheque or purchase order.
Why book a site survey before buying this kit?
A site survey confirms the cable route, the distance from camera to control box, the socket position for the power adapter and the mounting surface for the camera base. SmartRooms Qatar offers free site surveys, so the team can check the room before quoting. This matters most where the run approaches 100 metres or where the cable must pass through several walls.
