Logitech Rally Mic Pod 2 Mount Graphite Mounting Kit

Name: Logitech Rally Mic Pod 2 Mount Graphite Mounting Kit
Brand: Logitech
SKU: logitech-rally-mic-pod-2-mount
Availability: InStock

Overview

The Logitech Rally Mic Pod 2 Mount (952-000271) is a graphite mounting kit that fixes a Rally Mic Pod 2 to a meeting table or ceiling. The box includes a threaded rod, a lock nut and two screws, and the kit helps route and tidy cabling for a clean installation. It suits boardrooms, seminar rooms and training rooms across Doha, West Bay and Lusail where microphone placement must stay consistent. Request a quote from SmartRooms Qatar.

What this mounting kit is for

The Logitech Rally Mic Pod 2 Mount (part number 952-000271) is a graphite accessory that holds a Rally Mic Pod 2 in a fixed position, either on a table or against a ceiling. Fixing the pod in place keeps microphone placement consistent from one meeting to the next, which matters in rooms where people sit at different points around the table.

The kit is an installation part, not a microphone. The Rally Mic Pod 2 itself is not in the box, so specify the pod alongside the mount when you request a quote.

Parts supplied and dimensions to check

The box contains a threaded rod, a lock nut and two screws. The manufacturer lists the threaded rod at 34 mm high, 76 mm wide and 56 mm deep, and the lock nut at 15 mm high, 75 mm wide and 75 mm deep. Measure the clearance around the intended fixing point before the installer arrives, so the rod and nut fit without disturbing furniture or ceiling fittings.

Threaded rod: 34 mm high, 76 mm wide, 56 mm deep
Lock nut: 15 mm high, 75 mm wide, 75 mm deep
Fixings: two screws included

Where it fits in Qatar

In a boardroom in West Bay, a table-fixed pod stays at one point along a long conference table, and its cable runs beneath the table rather than across the surface. In a seminar room at Education City, a ceiling-fixed pod frees the table for laptops and printed papers during lectures. A ministry meeting room in Msheireb that runs sessions in Arabic and English side by side benefits from a pod that stays where it was set, even when the furniture is moved for a different layout.

Planning the installation

Fixing a pod into a table or ceiling changes the room, so plan the work with the building in mind. SmartRooms Qatar offers free site surveys, and we recommend one before anything is drilled into a table top or a ceiling. The survey confirms the fixing point, the cable route and access above the ceiling where it is needed.

The manufacturer data does not give an operating temperature range for this mount. For that reason, confirm the installation environment with the SmartRooms Qatar team before fitting it in any space that is not air-conditioned, such as a semi-outdoor pavilion or a room with direct sun exposure. Summer temperatures in Qatar can exceed 45°C, so this check is worth making early.

SmartRooms Qatar delivers to all 8 municipalities of Qatar and arranges professional installation. Organisations ordering through a purchase order or a government tender, including Monaqasat, can request a quote and we will confirm the right options for your site.

Highlights

Part number 952-000271, graphite finish
Fixes a Rally Mic Pod 2 to a table or ceiling
Includes threaded rod, lock nut and two screws
Threaded rod: 34 x 76 x 56 mm (H x W x D)
Supports neat routing and tidying of cables

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

15 specifications · Source: manufacturer · checked Oct 2026

Part Number1

Items: 952-000271

Dimensions - Threaded rod3

Height: 34 mm
Width: 76 mm
Depth: 56 mm

Dimensions - Lock nut3

Height: 15 mm
Width: 75 mm
Depth: 75 mm

Technical Specifications - Audio5

Microphone Frequency Response: 90 Hz – 16 kHz
Microphone Sensitivity: -36 dBFS +/-1dB @ 1Pa
Microphone data rate output: 48 kHz
Beamforming Elements: 7 omnidirectional microphones forming 6 acoustic beams
Audio processing: Al Noise Suppression Al Echo Suppression Al Voice Equalization Voice Activity Detection (VAD) Direction of Arrival (DoA) Acoustic Echo Cancellation (AEC)

Technical Specifications - General Specifications3

Interfaces: Output: RJ45 Input: RJ45
Cat cable between host device and Mic Pod 2: Cat5e cable up to 40 m (131.2 ft) Cat6 SF/UTP cable up to 70 m (229.6 ft)
Daisy chaining: Connect up to two mic pods with up to 10 m (32.8 ft) of cable between them, regardless of the type of Category cable.

Downloads

1 file from the manufacturer

PDF Datasheets rally-mic-pod-2-mount-datasheet.pdf 528 KB

Questions about Rally Mic Pod 2 Mount

What is the Logitech Rally Mic Pod 2 Mount used for?

It is a mounting kit that holds a Rally Mic Pod 2 in a fixed position, either on a meeting table or against a ceiling. Fixed placement keeps the pod in the same spot from one meeting to the next, so the microphone pickup stays predictable in boardrooms and seminar rooms where people sit at different points around the table.

What comes in the box with the mount?

The box contains a threaded rod, a lock nut and two screws. The Rally Mic Pod 2 itself is not included, so you need to specify the pod separately when you request a quote from SmartRooms Qatar, particularly if you are fitting out several rooms at once.

What are the dimensions of the threaded rod and lock nut?

The manufacturer lists the threaded rod at 34 mm high, 76 mm wide and 56 mm deep. The lock nut measures 15 mm high, 75 mm wide and 75 mm deep. Compare these figures with the clearance under the table or above the ceiling before installation so the parts fit without moving existing fittings.

Can the mount be fixed to both a table and a ceiling?

Yes. The product is intended to secure the Rally Mic Pod 2 to either a table or a ceiling. Choose the option that suits the room: a table fixing keeps the pod close to participants, while a ceiling fixing keeps the table clear for laptops, documents and drinks.

Is the mount available in colours other than graphite?

The manufacturer data lists one variant, a graphite finish under part number 952-000271. If your room design requires a different colour, ask the SmartRooms Qatar team when you request a quote so we can confirm what is available for your order.

How does the mount help with cable management?

The mount is designed to conceal cabling and manage excess cable, so the pod connection looks tidy and cables are kept out of the way. This matters in executive boardrooms in West Bay or Lusail, where a clean table and a clear floor are part of the room presentation.

Which Qatar meeting rooms suit a table-mounted pod?

A table-mounted pod suits a boardroom in West Bay or a government meeting room in Msheireb where the table is the centre of discussion. The pod sits at a fixed point in front of participants, and the cabling runs beneath the table, which keeps the working surface clear.

When would a ceiling-mounted pod be the better choice?

A ceiling mount suits a lecture or seminar room in Education City, where the table is used for laptops, notes and exam materials. It also suits rooms in Al Sadd or the Industrial Area where the table is often rearranged. Confirm the ceiling construction and access during the site survey before fixing.

What should I measure before ordering?

Measure the fixing surface, the space under the table or above the ceiling, and the cable route to the nearest connection point. Compare these with the threaded rod at 34 mm high and the lock nut at 75 mm wide and deep. A free site survey from SmartRooms Qatar can check these details before any drilling takes place.

Can the mount be installed in an outdoor or non-air-conditioned area?

The manufacturer data does not give an operating temperature range for this mount, so it should not be assumed suitable for outdoor or non-air-conditioned spaces. Summer temperatures in Qatar can exceed 45°C. Confirm the environment with the SmartRooms Qatar team before installation.

Can my organisation order this through a purchase order or government tender?

Yes. SmartRooms Qatar accepts purchase orders (LPOs) and government tenders, including Monaqasat, and payment can be made by bank transfer, cheque or purchase order. Send the product name and part number 952-000271 with your quantities and site details, and the team will reply with a quotation, usually within one working day.