Logitech Rally Mic Pod 2 · Price in Qatar

Name: Logitech Rally Mic Pod 2 Conference Microphone for Rally Board 65
Brand: Logitech
SKU: logitech-rally-mic-pod-2
Availability: InStock

Overview

The Logitech Rally Mic Pod 2 is an add-on microphone designed for the Rally Board 65, picking up voices across a room with a 7.2 m diameter pickup range. Seven omnidirectional microphones form six acoustic beams, and RightSound 2 processing applies AI noise suppression and echo cancellation. Connected over RJ45 cable, it suits larger meeting rooms in Doha and Lusail that need full table coverage.

What the Rally Mic Pod 2 adds to a Rally Board 65 room

The Logitech Rally Mic Pod 2 is an add-on microphone designed for the Rally Board 65. A single microphone position often misses people seated at the far end of a table or near the door, and remote participants then struggle to follow the discussion. The pod extends pickup to those seats, so the audio reaching the other side of a call reflects the whole room rather than only the people closest to the main unit.

It is built for meeting rooms, boardrooms and seminar spaces in Qatar where discussions move around and participants join from Doha and abroad at the same time. Two colour options, Off White (989-001215) and Graphite (989-001214), let you match the pod to the finish of the room.

Pickup, processing and the figures that matter

Inside the pod, seven omnidirectional microphones form six acoustic beams. The listed pickup range is 7.2 m in diameter, the frequency response runs from 90 Hz to 16 kHz, and the data rate is 48 kHz. The listed microphone sensitivity is -36 dBFS ±1dB at 1 Pa.

RightSound 2 audio processing handles the clean-up. The listed functions are:

AI noise suppression to reduce background noise and chatter
AI echo suppression and acoustic echo cancellation
AI voice equalization for clearer speech
Voice activity detection and direction of arrival detection

Cabling and daisy-chaining across a larger room

The pod uses RJ45 input and RJ45 output. Cat5e SF/UTP shielded cable supports runs of up to 40 m between the host device and the pod, and Cat6 SF/UTP shielded cable supports up to 70 m. Up to two mic pods can be daisy-chained with up to 10 m of cable between them, whichever category cable is used. Map every cable route in advance and measure it, because these distances are limits, not targets.

Where it fits in Qatar

A boardroom in West Bay. A long executive table with the Rally Board 65 at one end can leave the far seats outside the main microphone's reach. A pod placed near those seats, inside the 7.2 m pickup circle, keeps remote directors hearing clearly from the foot of the table.

A ministry meeting room in Msheireb. Meetings that connect staff in Doha with colleagues abroad depend on every speaker being heard, whatever language they use. The pod picks up voices from seats within its range but does not translate speech, so seating layout matters as much as the equipment.

A university seminar room in Education City. Seminar discussions involve students speaking from different points around a table. Noise suppression and echo control reduce distractions from the room, and the pod's pickup helps participants on the far side join in.

Planning the installation

Before ordering, measure the distance from the Rally Board 65 to the furthest seat, note nearby noise sources such as doors and equipment, and mark cable routes. Because the source data does not give an operating temperature range, install the pod only in air-conditioned meeting spaces unless the SmartRooms Qatar team confirms another environment.

SmartRooms Qatar supplies the Rally Mic Pod 2 across Qatar, with free site surveys to confirm placement and cable routes. Quotations are usually issued within one working day, and purchase orders and government tenders are accepted. Request a quote with your room dimensions and seat plan, and the team will confirm the pod count and cabling before you commit.

Highlights

Designed as an add-on for the Rally Board 65
Pickup range listed at 7.2 m in diameter
Seven omnidirectional microphones forming six acoustic beams
AI noise suppression, echo suppression and echo cancellation
RJ45 in and out; Cat5e to 40 m, Cat6 to 70 m
Daisy-chain up to two pods with 10 m between them
Available in Off White (989-001215) or Graphite (989-001214)

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

11 specifications · Source: manufacturer · checked Oct 2026

Part Number2

Off White: 989-001215
Graphite: 989-001214

Technical Specifications - Audio6

Microphone Frequency Response: 90 Hz – 16 kHz
Microphone Sensitivity: -36 dBFS +/-1dB @ 1Pa
Microphone data rate output: 48 kHz
Beamforming Elements: 7 omnidirectional microphones forming 6 acoustic beams
Audio processing: Al Noise Suppression Al Echo Suppression Al Voice Equalization Voice Activity Detection (VAD) Direction of Arrival (DoA) Acoustic Echo Cancellation (AEC)
Pickup range: 7.2 m diameter

Technical Specifications - General Specifications3

Interfaces: Output: RJ45 Input: RJ45
Cat cable between host device and Mic Pod 2: Cat5e SF/UTP shielded cable up to 40 m; Cat6 SF/UTP shielded cable up to 70 m
Daisy chaining: Connect up to two mic pods with up to 10 m of cable between them, regardless of the type of Category cable.

Downloads

1 file from the manufacturer

PDF Datasheets rally-mic-pod-2-datasheet.pdf 316 KB

Questions about Rally Mic Pod 2

What is the Logitech Rally Mic Pod 2 used for?

It is an additional microphone pod that extends voice pickup for a Rally Board 65 setup, so people seated away from the main unit can be heard clearly by remote participants. It suits meeting rooms, boardrooms and seminar spaces where one microphone position does not reach every chair. The pod covers a 7.2 m diameter pickup area and processes the audio to reduce background noise and echo.

Is the Rally Mic Pod 2 made for the Rally Board 65?

Yes. The product is described as an add-on for the Rally Board 65, and its audio is processed with RightSound 2. The source data does not list other compatible devices, so confirm your current room setup before ordering. When you request a quote, share your existing configuration so the team can confirm the pod matches what you already run.

How large an area does one Mic Pod 2 cover?

The listed pickup range is 7.2 m in diameter. Measure your table and seating before ordering. If participants sit within a circle about 7.2 m across, one pod can cover them. For longer rooms, a second pod can be added in a daisy chain, so plan seat positions on paper before deciding how many units you need.

What audio processing does the Mic Pod 2 include?

The pod includes AI noise suppression, AI echo suppression, AI voice equalization, voice activity detection, direction of arrival detection and acoustic echo cancellation. Together these reduce background noise such as room chatter, limit echo, and help the system focus on whoever is speaking. Its listed frequency response is 90 Hz to 16 kHz with a 48 kHz data rate.

How many Mic Pod 2 units can be daisy-chained?

Up to two mic pods can be connected together, with up to 10 m of cable between them, regardless of the category cable type used. This suits long boardrooms or lecture rooms where speakers sit at both ends of the table. Plan the route between the pods before ordering cable, so the 10 m limit is not exceeded during installation.

Which network cable does the Mic Pod 2 need?

The pod has RJ45 input and RJ45 output. Cat5e SF/UTP shielded cable supports runs of up to 40 m between the host device and the pod, while Cat6 SF/UTP shielded cable supports up to 70 m. Choose Cat6 where the cable route is longer, and ask your installer to confirm the route length during the site survey before cable is pulled.

What is the difference between the Off White and Graphite versions?

The two versions share the same listed specifications and differ only by colour. Off White uses part number 989-001215 and Graphite uses 989-001214. Choose the colour that suits the furniture and wall finish of the room. When requesting a quote, quote the exact part number so the correct colour is supplied for each room.

Would one Mic Pod 2 work in a West Bay boardroom with a long table?

It can, if the table and chairs fall within the pod's 7.2 m pickup diameter. Start by measuring from the Rally Board 65 position to the furthest seat. A boardroom with a long executive table may need a second pod, which can be daisy-chained with up to 10 m of cable. A free site survey confirms placement before cabling begins.

Can the pod be used in a Msheireb ministry meeting where Arabic and English speakers take turns?

The pod picks up voices from any seat within its range, so speakers using Arabic or English are captured in the same way. It does not change the language of the meeting or translate speech, and the source data lists no language features. In a meeting room in Msheireb, place the pod so seats on both sides of the table fall inside the pickup circle, and confirm the layout during a site survey.

Is it suitable for an Education City seminar room where students discuss around a table?

Seminar rooms where students sit around a table and speak from different points benefit from pickup that is not tied to one spot. The pod's six acoustic beams and 7.2 m pickup diameter help participants on different sides be heard, while noise and echo suppression reduce distractions in the room. Confirm seat positions and pod count before ordering, and include a room sketch in your quote request.

Can a private school in Al Rayyan or Al Wakrah use it for classroom discussions?

The pod is designed for meeting and conference use, so schools should treat it as a meeting-room accessory rather than a general classroom device. Check where discussions happen and whether one pod's 7.2 m pickup covers those seats. A school ordering for several rooms can raise a purchase order, and each room can be quoted separately to match its layout and cable routes.

Can the Mic Pod 2 be installed in a hot, non-air-conditioned or outdoor space in Qatar?

The source data does not give an operating temperature range, so do not assume the pod suits unconditioned or outdoor areas where Qatar summer heat above 45°C and dust storms may apply. Install it in air-conditioned meeting rooms, and confirm any other environment with the SmartRooms Qatar team before mounting. A free site survey can check the room conditions first.