Barco
ClickShare Power Supply 100W
Barco ClickShare Power Supply 100W, 100-Watt Video Conferencing Accessory
Riser Mount for Logitech Tap
Logitech Riser Mount for Tap Controllers, Graphite 952-000080
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Logitech Riser Mount is a graphite elevated table mount for Logitech Tap and Tap IP meeting room touch controllers. It raises the controller to a 30° display angle, swivels 180°, adjusts to tables up to 50 mm thick and suits grommet holes from 51 to 89 mm. It is aimed at boardrooms and conference rooms in Doha and Lusail where the controller sits mid-table. Request a quote.
What the Logitech Riser Mount does
The Logitech Riser Mount is an elevated table mount that holds a Logitech Tap or Tap IP touch controller in a centre-of-table position, rather than leaving it flat at the table edge. The controller is raised to a 30° display angle, so people seated around the table can read the screen and operate it from their chairs. The graphite finish keeps the unit understated on a formal conference table.
Angle, swivel and reach for centre-of-table use
The mount swivels 180°, which lets you turn the controller toward the person who needs it. This matters when the controller sits in the middle of a long table, where the reach is greater than at the edge. Logitech recommends the riser for centre-of-table locations, while its Table Mount, with a 14° display angle, is intended for the edge of the table. The choice between them depends on where participants sit and how far they need to reach.
Checking your table before ordering
Confirm two measurements before you order:
- Table thickness: the mount adjusts to tables up to 50 mm (2.0 in) thick.
- Grommet hole: it fits grommet holes from 51 to 89 mm (2.0 to 3.5 in) in diameter.
Cables are routed down through the grommet hole, so the table surface stays clear. A Cable Cinch is included in the box to help bundle the run. If your table is thicker than 50 mm or its hole falls outside the 51 to 89 mm range, this mount will not suit it.
Where it fits in Qatar
In a ministry boardroom in Msheireb, a centre-of-table controller lets the chair start a video call without leaning across the table. In a university seminar room in Education City, the riser on a shared table lets students at the far end reach the controller easily. In a bank meeting room in West Bay, the down-routed cable keeps the table free for documents and laptops.
Planning the installation
With a Tap controller fitted, the assembly measures 102 mm high, 244 mm wide and 174 mm deep, so check there is room around the chosen spot. SmartRooms Qatar offers a free site survey, which is a practical step when a room has several tables of different thickness. Quotations are usually issued within one working day. Purchase orders (LPOs) and government tenders, including Monaqasat, are accepted for multi-room projects. Delivery covers all eight municipalities of Qatar, and professional installation can be arranged.
Send us your table thickness, grommet diameter and controller model, and the SmartRooms Qatar team will confirm the right mount and return a quote for your room. Request a quote today.
Highlights
- Raises Tap and Tap IP controllers to a 30° display angle
- Swivels 180° for centre-of-table reach
- Adjusts to tables up to 50 mm thick
- Fits grommet holes from 51 to 89 mm
- Routes cables down through the grommet hole
- Graphite finish, part number 952-000080
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
4 specifications · Source: manufacturer · checked Oct 2026
Part Number1
- Items
- 952-000080
Dimensions - Tap with Riser Mount3
- Height
- 102 mm
- Width
- 244 mm
- Depth
- 174 mm
Downloads
2 files from the manufacturerQuestions about Riser Mount for Logitech Tap
What is the Logitech Riser Mount used for?
It is an elevated table mount that holds a Logitech Tap or Tap IP touch controller in a centre-of-table position. It raises the controller to a 30° display angle and swivels 180°, so people seated around the table can operate it more easily. It suits meeting rooms where a fixed touch controller sits on the table itself.
Which touch controllers is it compatible with?
The mount is listed as compatible with Logitech Tap and Tap IP only, so confirm your controller model before ordering. The SmartRooms Qatar team can review your current setup during the quotation process, so the correct assembly is ordered for your room.
What table thickness and grommet sizes does it support?
The mount adjusts to tables up to 50 mm (2.0 in) thick and is designed for grommet holes from 51 to 89 mm (2.0 to 3.5 in) in diameter. Measure the table thickness and the hole before ordering. A free site survey is useful when a boardroom has several tables with different thicknesses.
How does cable management work?
Cables are routed down through the grommet hole, so they run beneath the table rather than across its surface. A Cable Cinch is included in the box to help bundle the run. This gives a cleaner look in rooms where the table surface is used for laptops, notepads and documents.
What is included in the box?
The package contains the Riser Mount Assembly, a Cable Cinch and product documentation. The controller itself is not listed in the box contents, so budget for a Tap or Tap IP controller separately and confirm the model in your quotation. Quotations are usually issued within one working day.
How does it differ from the Logitech Tap Table Mount?
The Table Mount has a 14° display angle and is recommended for the edge of the table, giving a shorter reach. The Riser Mount has a 30° display angle and is recommended for the centre of the table, giving a longer reach. Both support cable management, so the choice depends mainly on where the controller needs to sit.
When should I choose the Wall Mount instead?
The Logitech Tap Wall Mount is a space-saving wall mount with cable management and a 14° display angle, recommended for huddle rooms and hallways. If your room has a suitable wall but no central table position, it may fit better than a table mount. Ask the SmartRooms Qatar team to compare the options for your layout.
What are the overall dimensions with a Tap controller fitted?
With a Tap controller fitted, the assembly measures 102 mm high, 244 mm wide and 174 mm deep, according to the manufacturer's dimension data. Allow for that footprint and for the cable route under the table when you plan the position. Check the dimensions against the controller model you select.
Is it suitable for a boardroom table in Msheireb or West Bay?
Yes, provided the table is up to 50 mm thick and has a grommet hole between 51 and 89 mm. In a ministry or bank boardroom with a long central table, a centre-of-table controller is often useful, because the 180° swivel lets it face the person leading the meeting. Confirm the table measurements before ordering.
Can a school or government office order several units on an LPO?
Yes. Purchase orders (LPOs) and government tenders, including Monaqasat, are accepted, and payment can be made by bank transfer, cheque or purchase order. A school fitting out several classrooms or a ministry equipping several meeting rooms can send one request listing each table's thickness and grommet size, so the quotation matches every room.
Can I use it in a non-air-conditioned area or near windows?
The manufacturer data for this mount does not list an operating temperature range, so its suitability for hot or unconditioned spaces cannot be confirmed here. It is designed for meeting room tables. If you are considering a lobby, an outdoor area or a room exposed to summer dust, confirm the environment with the SmartRooms Qatar team before ordering.
Is it available in a colour other than graphite?
The manufacturer lists this model, part number 952-000080, in graphite only. If your room design calls for a different finish, the SmartRooms Qatar team can confirm what is available as part of your quotation. Send your controller model and table details with the request so the quote covers the full installation.
