Barco
ClickShare Power Supply 100W
Barco ClickShare Power Supply 100W, 100-Watt Video Conferencing Accessory
Table Mount for Logitech Tap
Logitech Table Mount for Logitech Tap 939-001811, Dark Grey
- Platforms
- Logitech Tap IP Logitech Tap
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Logitech Table Mount for Tap is a dark grey, low-profile swivel mount for Logitech Tap and Tap IP meeting room controllers. It fits tables up to 50 mm thick, passes through grommet holes from 51 to 89 mm, and turns 180 degrees for use from several seats. Cables route down through the grommet for a tidy finish. Suited to boardrooms in Doha and Lusail.
What this table mount does for a Tap controller
The Logitech Table Mount for Logitech Tap, part number 939-001811, holds a Logitech Tap or Tap IP touch controller on a meeting table at a fixed, low angle. Instead of leaving the controller loose on the table or fixing it to the wall, the mount places it on a swivel base that keeps the screen at a 14° angle. The base turns through 180 degrees, so a presenter at one end of the table and a colleague at the far side can both reach the touch screen without moving the unit.
Finished in dark grey, the mount has a low profile, so the controller keeps its slim look on the table surface. With a Tap fitted, the assembly measures 61 mm high, 244 mm wide and 179 mm deep.
Table thickness and grommet fit
Two measurements decide whether the mount will fit: the thickness of the table top and the diameter of any cable grommet. The mount adjusts to tables from 20 to 50 mm thick (0.75 to 2.0 inches). Where a grommet hole is used, it must fall between 51 and 89 mm in diameter (2.0 to 3.5 inches). Measure both before ordering, especially on tables with thick laminated or veneered tops.
Cable management is built around the grommet. Cables are routed down through the hole, which keeps the connections out of sight beneath the table, and a cable cinch in the box helps organise the run. The table mount does not list in-wall cabling as a routing option, so plan the cable path under the table before installation.
Where it fits in Qatar
- Ministry and authority boardrooms in Msheireb or West Bay: long tables where the controller must be reached from several seats, in rooms that hold meetings in Arabic and English.
- University meeting rooms in Education City: seminar tables where staff and visiting researchers share one controller.
- Corporate offices in Lusail and The Pearl: executive meeting rooms that connect to teams abroad, where a tidy cable path keeps the table clear.
Planning the installation
Confirm the controller model before ordering, because this mount is specified for the Logitech Tap and Tap IP only. The data for this mount does not include an operating temperature range, so ask the SmartRooms Qatar team to confirm the conditions in your room, particularly if the table sits near a window or an entrance. Plan the controller position so the cable reaches the room connections without strain.
SmartRooms Qatar offers free site surveys, so table thickness and grommet size can be checked in person before you commit. We deliver to all eight municipalities of Qatar and can install the mount professionally on request. Organisations equipping several rooms can raise a purchase order (LPO) for the whole batch, and government tenders are supported. The mount is covered by the manufacturer's warranty.
Request a quote for the Logitech Table Mount for Logitech Tap, 939-001811, and include the table thickness and grommet diameter so the team can confirm fit within your quotation.
Highlights
- Low-profile mount for Logitech Tap and Tap IP controllers
- 180° swivel for viewing from multiple seats
- Fits tables up to 50 mm (0.75 to 2.0 inches) thick
- Grommet holes from 51 to 89 mm (2.0 to 3.5 inches)
- Cables route down through the grommet; cable cinch included
- Tap with mount measures 61 x 244 x 179 mm (H x W x D)
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
7 specifications · Source: manufacturer · checked Oct 2026
Part Number1
- Items
- 939-001811
Dimensions - Tap with Table Mount3
- Height
- 61 mm
- Width
- 244 mm
- Depth
- 179 mm
Technical Specifications - System Requirements1
- Compatibility
- Logitech Tap IP Logitech Tap
Technical Specifications - General Specifications2
- Table Thickness
- 0.75 - 2.0 in (20 - 50 mm)
- Grommet Diameter
- 2.0 - 3.5 in (51 - 89 mm)
Downloads
2 files from the manufacturerQuestions about Table Mount for Logitech Tap
Which Logitech controllers does this table mount support?
The mount is listed for the Logitech Tap and Tap IP touch controllers, which are the two models it is designed to hold on a table. Because compatibility is specified only for these models, ask the SmartRooms Qatar team to confirm the fit before ordering if your room uses another device.
What table thickness does it accept?
It adjusts to tables from 20 mm to 50 mm thick, or 0.75 to 2.0 inches. Measure the table top at the point where the mount will sit, because a thicker top falls outside the stated range. A free site survey can confirm the measurement on site before you place an order.
What grommet size is needed for cable routing?
Cables route down through a grommet hole between 51 mm and 89 mm in diameter, which is 2.0 to 3.5 inches. The cable cinch in the box helps keep the run organised beneath the table. If the table has no grommet, or the existing hole is outside this range, raise it during the survey so the cable path is planned first.
Can the Tap be turned to face people at different seats?
Yes. The mount swivels through 180 degrees, so the controller can face a presenter at one end of the table or people seated along the sides. The screen keeps a 14 degree angle, which suits seated users. This makes it practical for boardroom and training tables where several people use the controller in turn.
How does it differ from the Riser Mount for Logitech Tap?
The Table Mount sits low with a 14° screen angle and is recommended for the edge of a table, where reach is shorter. The Riser Mount is elevated with a 30° angle and suits the centre of a table, where the controller needs a longer reach. Choose according to where people sit and where the controller will be placed.
What is included in the box?
The box contains the table mount assembly, a cable cinch and documentation. The Tap controller itself is not listed in the box contents, so confirm with your quotation which controller model and quantity you need. Check that the mount code 939-001811 matches your order.
Will it fit a narrow boardroom table in a Lusail office?
With a Tap fitted, the assembly measures 61 mm high, 244 mm wide and 179 mm deep. In a narrow boardroom, check that the 179 mm depth leaves enough room for the presenter and chairs on that side of the table. A site survey helps confirm the position before you order several units for a set of rooms.
Is it suitable for a ministry boardroom in Msheireb?
It suits a ministry boardroom where the controller is used from several seats and the table meets the thickness and grommet requirements. Meetings that switch between Arabic and English benefit from a controller that can be turned toward whoever is presenting. Confirm the room conditions and cable route with SmartRooms Qatar before installation.
Can it be used in a room exposed to Qatar's summer heat?
The data for this mount does not give an operating temperature range, so no range is stated here. Summer temperatures in Qatar can exceed 45°C, so if the table sits near a window, a glazed wall or an entrance, ask the SmartRooms Qatar team to confirm the environment before you order.
Can a school order several units for its meeting rooms?
Yes. A school fitting out several meeting rooms or staff rooms can raise a purchase order (LPO) and receive one quotation covering all units. Table thickness and grommet size often differ between rooms, so a free site survey before ordering helps match each mount to the correct table.
Is it suitable for a hotel meeting room in West Bay?
It suits a hotel meeting room that hosts business guests seated at several positions, provided the tables fall within the stated thickness and grommet ranges. The swivel helps guests at different seats reach the controller. Ask for a quotation that includes professional installation if you want the mount fitted before the room is used.
Do you deliver outside Doha, and what about the warranty?
SmartRooms Qatar delivers to all eight municipalities of Qatar and can install the mount professionally on request. The mount is covered by the manufacturer's warranty. The warranty terms are not included in the data for this model, so ask for them with your quotation.
