Logitech Wall Mount for Rally Camera Extension Kit

Name: Logitech Wall Mount for Rally Camera Extension Kit, Graphite
Brand: Logitech
SKU: logitech-wall-mount-for-rally-camera-extension-kit
Availability: InStock

Overview

The Logitech Wall Mount for Rally Camera Extension Kit is a graphite mount that lets you install a Logitech Rally Camera on a wall, blackboard or whiteboard. The box holds the mount, a wall mount cover, mounting hardware and documentation. Without its cover the mount measures 148 x 135 x 165 mm. It suits meeting rooms, classrooms and seminar spaces in Qatar that need a fixed camera position. Request a quote from SmartRooms Qatar.

A fixed mounting point for the Rally Camera

The Logitech Wall Mount for Rally Camera Extension Kit, model 952-000223, gives a Logitech Rally Camera a fixed and tidy position on a wall, blackboard or whiteboard. Instead of leaving the camera on a table or shelf, you can place it where the room's sightlines work best for the people in it, and keep cables out of the way.

The graphite mount ships with a wall mount, a wall mount cover, mounting hardware and documentation, so everything needed for the mount itself is supplied together.

Dimensions and weight to plan for

Without its cover, the mount measures 148 mm high, 135 mm wide and 165 mm deep, and weighs 640 g. Fitting the cover brings the weight to 650 g. These figures help you check whether a wall section, a blackboard frame or a whiteboard panel can take the mount securely, and they show how much clearance the camera body needs on the surface.

Height: 148 mm without cover
Width: 135 mm without cover
Depth: 165 mm without cover
Weight: 640 g without cover, 650 g with cover

Where it fits in Qatar

A boardroom in West Bay might use the mount on a plain wall opposite the table, so remote participants from Doha and overseas see the whole room. In a school in Education City, a classroom can keep the camera fixed above a whiteboard during lessons that connect a teacher with a partner school. A training centre in Msheireb with a blackboard at the front of a seminar room can place the camera there without taking up floor space.

Before you order

Confirm the wall or board surface and the room layout before ordering, because the mount stays in one place and the camera must see the seating area clearly. SmartRooms Qatar offers free site surveys, and the team can check the surface and mounting position with you. If the camera would sit near a window or in a lobby exposed to heat and dust, ask the team to confirm the environment, since the manufacturer data for this mount gives no operating temperature range.

Tell us the number of rooms, the wall or board type and the camera model you plan to use, and we will prepare a quotation, usually within one working day. Request a quote from SmartRooms Qatar for the Logitech Wall Mount for Rally Camera Extension Kit today.

Highlights

Graphite finish, model 952-000223
Mounts a Rally Camera on walls, blackboards or whiteboards
Measures 148 x 135 x 165 mm without its cover
Weighs 640 g, or 650 g with the wall mount cover
Box includes mount, cover, mounting hardware and documentation

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

6 specifications · Source: manufacturer · checked Oct 2026

Part Number1

Items: 952-000223

Dimensions - Wall mount without cover4

Height: 148 mm
Width: 135 mm
Depth: 165 mm
Weight: 640 g

Dimensions - Wall mount with cover1

Weight: 650 g

Downloads

0 files from the manufacturer

No downloadable files are listed for this model yet. Ask us and we will send the datasheet.

Questions about Wall Mount for Rally Camera Extension Kit

What is this product and who is it for?

This is a graphite wall mount, model 952-000223, designed for installing the Logitech Rally Camera on walls, blackboards or whiteboards. It suits meeting rooms, classrooms and seminar spaces in Qatar where the camera needs a fixed position rather than a spot on a table. It is an accessory, so plan it alongside the camera and the room layout. Request a quote to confirm the right set for your room.

Can the Rally Camera be mounted on a whiteboard or blackboard?

Yes. The manufacturer states that this mount allows installation of the Rally Camera on walls, blackboards or whiteboards. Before fixing anything, check the board frame and the material behind it, and ask the SmartRooms Qatar team to advise on the right fixing method for your surface. Keep the camera clear of glare from the board and make sure the teacher or presenter stays within its view.

What comes in the box?

The box contains the wall mount, a wall mount cover, mounting hardware and documentation. The weight figures show the cover is a separate element: the mount weighs 640 g without it and 650 g with it. Read the documentation for the fixing steps and confirm that the supplied hardware suits your wall or board before installation. Our team can review the parts list with you when you request a quote.

How big is the mount?

Without its cover, the mount measures 148 mm high, 135 mm wide and 165 mm deep. Use these dimensions to plan clearance around the camera, especially where a door, a cabinet or a whiteboard frame sits close by. Measure the spot in your room before ordering, and note the depth when you decide how far the camera will sit from the surface.

How much does the mount weigh, and does the cover change it much?

The mount weighs 640 g without its cover and 650 g with the cover fitted, a difference of 10 g. The weight is close either way, but record the figure you installed with when you plan fixing points. Add it to your site survey notes alongside the wall or board material, and keep the documentation with the room's AV records for future maintenance.

Which spaces in Qatar suit this mount best?

A boardroom in West Bay or Lusail, where the camera must frame the whole table, is a strong fit for a wall mount. So is a classroom in Al Sadd where a teacher wants the camera fixed above the whiteboard during remote lessons. Both spaces keep table and floor area free and benefit from a planned camera position. Ask for a quote with the room size and wall type so the team can confirm the fit.

How should I plan installation for a room in Doha?

Start with a free site survey from SmartRooms Qatar. The survey checks the wall or board surface, the camera's view of the seating area and the clearance around the mount. Record the wall material, the 148 mm height and 135 mm width of the mount, and the position of nearby power and network outlets. The team can then prepare a quotation for supply and professional installation, usually within one working day.

Can I install it near a window or in a lobby with heat and dust?

The manufacturer data for this mount gives no operating temperature range and no dust rating, so do not assume it suits hot or dusty areas. In Qatar, summer temperatures above 45°C and dust storms affect equipment near windows and in entrance lobbies. Ask the SmartRooms Qatar team to confirm the environment before ordering, and where possible plan the mount in an air-conditioned room.

Can a school order several mounts for classrooms in Al Wakrah with an LPO?

Yes. SmartRooms Qatar accepts purchase orders (LPOs), government tenders including Monaqasat, and payment by bank transfer, cheque or purchase order. A school fitting out several classrooms in Al Wakrah can issue one LPO covering all the mounts and cameras and agree a site survey for each room. Because each room may have a different wall or board, list the room and surface type on the order.

Does this product include the Rally Camera itself?

No. This item is the wall mount and the parts it ships with: the wall mount, a wall mount cover, mounting hardware and documentation. The Rally Camera is a separate product. Confirm which camera model your room will use, and compare the mount's contents with your camera setup before ordering so nothing is missed.

What colour is it, and is it covered by warranty?

The mount is finished in graphite, which is the only colour variant in the manufacturer data. Products supplied by SmartRooms Qatar are covered by the manufacturer's warranty, so ask the team for the warranty details in writing with your quotation. When you request a quote, state model 952-000223 and the graphite finish to avoid confusion on your purchase order.

Similar models

Yealink MVC S60 Yealink MVC S60 Microsoft Teams Rooms System with 360° Camera

360°

Biamp Evoko Liso Glass Mount Kit Biamp Evoko Liso Glass Mount Kit (910-01931) for Glass Walls

TAA Compliant

Biamp Evoko Liso Tilt Glass Wall Mount Kit Biamp Evoko Liso Tilt Glass Wall Mount Kit, Item 910-01933

TAA Compliant

Biamp Evoko Liso Tilt Wall Mount Kit Biamp Evoko Liso Tilt Wall Mount Kit for Room Booking

TAA Compliant

Biamp Evoko Liso Wall Mount Kit Biamp Evoko Liso Wall Mount Kit (910-01930) for Room Scheduling Displays

TAA Compliant