A20S
Nearity A20S Conference Speakerphone with 8-Mic Array
- Microphones
- 8 × omnidirectional MEMS…
- Pickup range
- 5 m / 16 ft (Consistent…
- Platforms
- 4-core CPU + 3 TOPS NPU (All…
- Connectivity
- USB 2.0 Type-C (Carries audio…
The Nearity A20S is a tabletop USB conference speakerphone with an 8-microphone array covering 360 degrees and a pickup range of up to 5 m (16 ft). Its on-device 3 TOPS NPU handles AI noise suppression and echo cancellation, and it runs without drivers with Zoom, Microsoft Teams, Google Meet and Webex. Link up to six units over Cat6 to cover rooms of 600+ sq ft. It suits huddle rooms, boardrooms and training rooms across Doha. Request a quote from SmartRooms Qatar.
What the Nearity A20S is
The Nearity A20S is a tabletop conference speakerphone for rooms where several people sit around one table and join video calls from a laptop. It connects to the computer over a single USB Type-C cable, so there is no driver installation and no separate audio interface to buy. Its eight omnidirectional MEMS microphones cover the full 360 degrees around the unit and pick up voices from up to 5 m (16 ft) away, so people do not need to lean toward the device to be heard.
Audio processing that does the hard work
All audio processing runs on the device itself, using a 4-core CPU and a 3 TOPS NPU, so the unit does not depend on a cloud service. The features that matter most in a busy room are:
- AI noise suppression trained on more than 300 everyday office sounds, including keyboard typing, paper handling, mouse clicks and air-conditioning hum.
- Echo control for both line echo and room echo, including reflections from glass walls.
- Full-duplex audio, so two people can speak at the same time without the call cutting out.
- Adaptive beamforming that steers pickup toward the active speaker, with automatic gain control keeping distant voices at a consistent level.
Speech is tuned for the 220 Hz to 12 kHz band. The built-in speaker is rated at 4 Ω / 5 W with a maximum output of 80 ± 3 dB SPL at 1 m. Audio parameters can be adjusted with Nearity Device Manager software, which also handles firmware updates.
Scaling from one table to a large room
A single A20S is rated for 100 to 250 sq ft and four to eight people. When a room grows, link up to six units into one cascaded array. The units connect through RJ45 ports labelled PREVIOUS (input) and NEXT (output) using PoE UTP Cat6 cable. The first unit takes the included DC 54 V / 1.2 A adapter, which powers every downstream unit, and extension units receive both audio and power over the same cable with no extra adapters. Six units are rated for more than 600 sq ft and 100 people.
Where it fits in Qatar
- A four-person huddle room in an office tower in West Bay, where one unit handles weekly stand-ups with colleagues abroad.
- A glass-walled boardroom in Msheireb, where echo from the glass and background hum are the main complaints from remote participants, and the echo and noise processing addresses both.
- A training room in Education City with several units daisy-chained along a long table for hybrid seminars on Zoom or Microsoft Teams.
What to plan before you order
The A20S is designed for tabletop placement, so plan the seating layout first and measure the room before deciding how many units to order. The source data does not list an operating temperature range, so confirm the installation environment with the SmartRooms Qatar team before placing units near windows or in spaces that are not air-conditioned. The device supports Windows, macOS, ChromeOS and Linux, including Apple Silicon M1 to M6 and Intel-based MacBooks. The product carries a 12-month warranty from the manufacturer. Send your room sizes, seating plan and video platforms to the SmartRooms Qatar team, who will prepare a quotation usually within one working day for delivery across all eight municipalities of Qatar. Request a quote for your A20S configuration today.
Highlights
- 8 omnidirectional MEMS microphones with 360° coverage
- Pickup range up to 5 m / 16 ft
- Daisy-chain up to six units over PoE Cat6 cable
- Plug-and-play USB Type-C with no drivers required
- Certified or verified for Zoom, Microsoft Teams, Google Meet and Webex
- 12-month manufacturer warranty
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
Audio Hardware / Microphone System5
- Microphone Array
- 8 × omnidirectional MEMS microphones, 360° coverage
- Effective Pickup Range
- 5 m / 16 ft (Consistent intelligibility across the full pickup radius via Automatic Gain Control)
- Sensitivity
- -38 dBFS @ 94 dB SPL, 1 kHz
- Signal-to-Noise Ratio
- 68 dBV/Pa, 94 dB SPL @ 1 kHz, A-weighted
- Beamforming
- Supported (Adaptive beamforming steers pickup toward the active talker)
Audio Hardware / Speaker System4
- Rated Output Power
- 4 Ω / 5 W
- Frequency Response
- 220 Hz – 12 kHz (Tuned for the voice band to maximize speech clarity in conferencing)
- Maximum Output Level
- 80 ± 3 dB SPL @ 1 m
- Total Harmonic Distortion
- < 5%
AI Audio Processing / Processing Engine2
- Compute Platform
- 4-core CPU + 3 TOPS NPU (All processing runs on-device — no cloud dependency, no added latency)
- Full-Duplex Audio
- Yes (Simultaneous two-way speech with no cutoffs or clipping)
AI Audio Processing / Algorithm Suite6
- AI Noise Suppression
- Yes — AI 2.0 deep-learning suppression (Trained to remove 300+ common office noises: keyboard typing, paper shuffling, mouse clicks, HVAC hum)
- Acoustic Echo Cancellation
- Yes (Removes both line echo and room echo, including glass-wall reflections)
- De-reverberation
- Yes
- Automatic Gain Control (AGC)
- Yes
- Voice Activity Detection (VAD)
- Yes
- Adjustable Audio Parameters
- Yes — tunable via Nearity Device Manager software
Connectivity & Expansion / Host Connection2
- USB Interface
- USB 2.0 Type-C (Carries audio data and device control; driver-free UAC-compliant connection)
- Setup
- Plug & play — no drivers or software required
Connectivity & Expansion / Daisy-Chain Expansion4
- Expansion Ports
- 2 × RJ45 — PREVIOUS (input) / NEXT (output)
- Cable Requirement
- PoE UTP RJ45 (Cat6) (Extension units receive both audio and power over the daisy-chain cable — no extra adapters)
- Maximum Configuration
- 6 units in a single cascaded array
- Coverage Scaling
- 1 unit: 100–250 sq ft (4–8 people) · up to 6 units: 600+ sq ft (100+ people) (Start with one unit, scale with standard Ethernet cabling as rooms grow)
Connectivity & Expansion / On-Device Controls2
- Controls
- Capacitive touch: microphone mute, volume +/– (Mute state syncs with leading UC platforms)
- Status Indication
- Per-function LED indicators
Compatibility / Operating Systems2
- Desktop
- Windows · macOS · ChromeOS · Linux (Supports Apple Silicon (M1–M6) and Intel-based MacBooks; compatible with the latest macOS versions)
- Driver Requirement
- None — native USB Audio Class (UAC)
Compatibility / UC Platform Support2
- Certified / Verified Platforms
- Zoom · Microsoft Teams · Google Meet · Webex · GoTo Meeting
- Also Works With
- Skype, Slack, BlueJeans, OBS and other standard USB-audio applications
Compatibility / Management1
- Device Management
- Nearity Device Manager software (Audio tuning, firmware updates, room-specific parameter adjustment)
Physical & Power / Physical Characteristics4
- Dimensions (W × D × H)
- 120 × 120 × 64 mm (4.7 × 4.7 × 2.5 in)
- Net Weight
- 359 g (12.66 oz)
- Color
- Deep Tarnish
- Mounting
- Tabletop placement
Physical & Power / Power3
- Main-Unit Power
- DC 54 V / 1.2 A adapter (included) (Required on the first unit of a daisy-chain; powers all downstream units via PoE)
- Alternative Power
- USB 5 V / 0.5 A (Single-unit portable operation, powered directly from the host computer)
- Extension-Unit Power
- PoE over daisy-chain cable — no separate supply needed