Barco
ClickShare Power Supply 100W
Barco ClickShare Power Supply 100W, 100-Watt Video Conferencing Accessory
ACC-STSCF1
Peerless ACC-STSCF1 UC Bracket Mount for Crestron Flex 260/200 Engine
- Platforms
- Yes
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Peerless ACC-STSCF1 is a black, powder-coated bracket that carries the Crestron Flex 260/200 UC engine on the Peerless STS680 wall mount. It attaches to the UC engine bracket without removing any Crestron Flex components, which simplifies both installation and later servicing. Rated for up to 4.54 kg, it suits meeting rooms and boardrooms in Doha, Lusail and West Bay that already run Crestron Flex video conferencing.
How the ACC-STSCF1 supports a Crestron Flex room
The Peerless ACC-STSCF1 is a dedicated wall-mounting bracket for the Crestron Flex 260/200 UC Engine. It attaches to the engine's own bracket and carries the unit on the Peerless STS680 wall plate, so the engine sits in a fixed, tidy position beside the display instead of loose on a shelf or in a cable tray.
The practical gain is on the service side. The bracket goes on without removing any Crestron Flex components, so an installer or technician can set up or maintain the UC engine without taking the system apart first. For an IT team looking after several meeting rooms, that simplifies every visit and keeps the wall arrangement consistent from room to room.
Specifications to check before ordering
- Load rating: up to 4.54 kg for the AV components it carries.
- Size: 51.16 cm high, 24.13 cm wide and 3 cm deep.
- Weight: approximately 272.2 g.
- Finish: black, powder coated.
- Package: upper bracket, lower bracket and two M5 Phillips screws.
- Warranty: 5-year limited warranty from the manufacturer.
- Compliance: TAA compliant and RoHS compliant.
Where it fits in Qatar
A boardroom in West Bay or Msheireb that runs Crestron Flex for hybrid meetings with partners abroad will want the UC engine out of the way of the table. A bracket on the wall keeps the room layout clean while leaving the engine reachable for maintenance.
A university seminar room in Education City may be used by different departments throughout the week. The bracket attaches to the left, right or centre of the STS680, so the installer can position the engine to suit how the room is laid out.
A hotel conference room in Lusail that is reconfigured often for events benefits from a setup that can be serviced without dismantling the Crestron Flex components each time.
Planning the installation
Confirm that the wall mount in the room is the Peerless STS680 SmartMount Universal Ultra-Slim Scissor Wall Mount, which the manufacturer lists for displays from 49 to 120 inches and larger. Check the display's VESA pattern as well, since the manufacturer's data describes use with patterns from 400 x 400 mm to 1000 x 600 mm.
Assembly is required, so allow time for a qualified installer to fit the upper and lower brackets using the two M5 Phillips screws supplied. SmartRooms Qatar offers free site surveys, which help confirm wall construction, cable routes and mounting height before work begins.
The manufacturer's data does not list an operating temperature range for this bracket, so confirm the room's temperature and dust conditions with the SmartRooms Qatar team, particularly for rooms with glazing that receives strong afternoon sun.
The ACC-STSCF1 is a small, specific part with a clear job. If you are fitting out or servicing a Crestron Flex room in Qatar, request a quote from SmartRooms Qatar. We usually issue quotations within one working day and accept purchase orders (LPOs), government tenders including Monaqasat, and payment by bank transfer, cheque or purchase order.
Highlights
- Attaches to the Crestron Flex 260/200 UC Engine bracket
- Mounts to the Peerless STS680 wall plate
- Rated for loads up to 4.54 kg
- Black powder-coated finish, about 272.2 g
- Upper and lower brackets plus two M5 Phillips screws
- 5-year limited warranty, TAA compliant
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
29 specifications · Source: manufacturer · checked Oct 2026
General Information8
- Manufacturer
- Peerless Industries, Inc
- Manufacturer Part Number
- ACC-STSCF1
- Manufacturer Website Address
- http://www.peerless-av.eu.com
- Brand Name
- Peerless-AV®
- Product Model
- ACC-STSCF1
- Product Name
- STS680 Crestron Flex 260/200 UC Bracket Mount
- Packaged Quantity
- 1 Unit
- Product Type
- Mounting Bracket
Product Information5
- Device Supported
- A/V Equipment; Media Player
- Maximum Load Capacity
- 4.54 kg
- Features
- Hook-and-Hang Design; Storage Space
- Mount Function
- Accessory
- Mount Surface
- Wall
Physical Characteristics9
- Color Family
- Black
- Product Color
- Black
- Finishing
- Powder Coated
- VESA Mount Compatible
- Yes
- Form Factor
- Wall Mountable
- Height
- 51.16 cm (20.14")
- Width
- 24.13 cm (9.50")
- Depth
- 3 cm (1.18")
- Weight (Approximate)
- 272.2 g
Miscellaneous6
- Package Contents
- STS680 Crestron Flex 260/200 UC Bracket Mount; 1 x Upper Bracket; 1 x Lower Bracket; 2 x M5 Phillips Screws
- Application/Usage
- Wall
- Compatibility
- STS680: SmartMount® Universal Ultra-Slim Scissor Wall Mount for 49" to 120"+ Displays
- Assembly Required
- Yes
- TAA Compliant
- Yes
- Environmental Compliance
- Restriction of Hazardous Substances (RoHS)
Warranty1
- Limited Warranty
- 5 Year
Downloads
3 files from the manufacturerQuestions about ACC-STSCF1
What is the Peerless ACC-STSCF1 used for?
The ACC-STSCF1 is a bracket that holds the Crestron Flex 260/200 UC Engine on a Peerless STS680 wall mount. It suits boardrooms and meeting rooms in Doha, West Bay and Lusail where the UC engine should sit neatly on the wall beside the display rather than on a shelf or credenza. It is an accessory, so it is ordered alongside the Crestron Flex system and its wall mount.
Which Crestron product does this bracket fit?
It is designed for the Crestron Flex 260/200 UC Engine and attaches to that unit's UC bracket. The manufacturer describes attachment without removing any Crestron Flex components. Before ordering, confirm the room uses the Crestron Flex 260/200 UC system, because the manufacturer's data does not list other Crestron engines as compatible.
Will it work with a 75-inch display on an STS680 in a ministry meeting room in Doha?
The STS680 is listed by the manufacturer for displays from 49 to 120 inches and larger, so a 75-inch panel falls within that listed range. The bracket attaches to the left, right or centre of the STS680. Check the display's VESA pattern against the 400 x 400 mm to 1000 x 600 mm range in the manufacturer's data, and confirm the final setup during a site survey.
How much weight can the bracket carry?
The maximum load capacity is 4.54 kg, which the manufacturer also states as support for AV components up to 4.5 kg (10 lb). Weigh your media player and any attached AV components, then compare the total with this figure before ordering, especially for a hotel conference room in Lusail where equipment may be moved between setups.
What comes in the box?
The package includes one upper bracket, one lower bracket and two M5 Phillips screws, supplied as one unit. Assembly is required, so the brackets are fitted during installation rather than arriving pre-assembled. The STS680 wall mount is not in the package, so confirm that your room already has one or add it to the quotation.
How large is the bracket and how heavy is it?
The bracket measures 51.16 cm high, 24.13 cm wide and 3 cm deep, and weighs approximately 272.2 g. These figures help planners check the clear wall space beside a display in a classroom or training room in Education City, particularly where cable routes and the engine position must fit a tight layout.
Does the bracket need drilling into drywall?
According to the manufacturer, the ACC-STSCF1 removes the need for drywall drilling for the UC solution because it attaches to the STS680 wall plate. The STS680 itself is still fixed to the wall, so the method depends on wall construction. Offices in The Pearl or Msheireb with drywall partitions should have their wall type confirmed during a free site survey.
Can it be fitted on a window-facing wall in a Doha office with strong afternoon sun?
The manufacturer's data does not give an operating temperature range or outdoor rating for this bracket, so it should not be assumed suitable for sun-exposed or outdoor walls. Qatar summers can exceed 45°C. Ask the SmartRooms Qatar team to review the room's heat and dust conditions before fitting it on glazed walls.
Is it compliant for a government tender?
The manufacturer's data states the bracket is TAA compliant and RoHS compliant, meaning it falls under the restriction of hazardous substances. These details can be referenced in a tender or procurement file for a ministry or public authority in Qatar. For government tenders, including Monaqasat, SmartRooms Qatar can list the part number ACC-STSCF1 on the quotation so the item matches the specification.
What warranty applies to the ACC-STSCF1?
The manufacturer gives a 5-year limited warranty on this bracket, and products supplied by SmartRooms Qatar are covered by the manufacturer's warranty. Keep the quotation, purchase order and delivery paperwork with your asset record, because schools and government bodies often need them when they register equipment.
We are a training centre in Mesaieed fitting out four rooms. How do we order?
Send SmartRooms Qatar the number of rooms, the Crestron Flex configuration in each one, and whether each room already has an STS680 wall mount. We usually issue quotations within one working day and accept purchase orders (LPOs). Each room's bracket can be listed separately on the quotation so your procurement team can check quantities against the purchase order.
Who installs the bracket, and do we need a site survey first?
Assembly is required, so a qualified installer should fit the upper and lower brackets using the M5 Phillips screws supplied. SmartRooms Qatar offers professional installation and free site surveys. A survey before fixing is especially useful in a hotel conference room in Lusail or a corporate boardroom, where wall construction, cable routes and mounting height affect the final layout.
