Barco
ClickShare Power Supply 100W
Barco ClickShare Power Supply 100W, 100-Watt Video Conferencing Accessory
Power Cord CN for TC Bar M
Sennheiser Power Cord CN for TC Bar M, Mains Cable for TeamConnect Bar M
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Sennheiser Power Cord CN, article 700263, is the 5.9 ft mains cord for the TeamConnect Bar M video conferencing bar. It is sold as a standalone accessory, useful for replacing a lost cord, equipping a new bar, or keeping a spare for a busy meeting room. Each package includes a quick guide and a safety guide. Before ordering, confirm the plug suits your Qatar sockets, then request a quote from SmartRooms Qatar.
What this cord is for
The Sennheiser Power Cord CN, article 700263, is the mains cord made for the TeamConnect Bar M. It is sold as an accessory, so it suits two situations: an organisation equipping a new bar that needs the correct cord included in the order, or a team replacing a cord that was lost, damaged or disconnected during a room refit. The cord measures 5.9 ft, roughly 1.8 m. The package holds the cord, a quick guide and a safety guide, and no battery.
Because the cord has a fixed length, the position of the bar's power input and the route to the wall outlet matter more than they would for a freestanding device. A cord that looks long enough on paper can fall short once it runs behind a credenza or up a wall channel, so measure the full route before you order.
Plug and socket checks for Qatar
Qatar's mains supply runs at 240 V, 50 Hz and uses BS 1363 (Type G) sockets. The manufacturer data for this cord does not state its plug type or voltage rating, and the CN designation in the model name suggests a regional variant. Before you order, ask the SmartRooms Qatar team to confirm that the plug and rating suit the outlet where the bar will be connected. A single check at the start avoids delays when several rooms are being fitted at the same time.
Where a spare cord earns its place
- Boardrooms in West Bay or Lusail: a bar on a credenza needs its cord to reach a floor socket without a visible extension lead, so the route should be measured first.
- Schools in Al Rayyan or Education City: when a bar moves between teaching spaces, a matching spare keeps the set-up consistent across the building.
- Government offices in Msheireb: a spare kept on site means a scheduled meeting is not postponed while a replacement is sourced.
Planning the order
Give the quotation request the bar model, article number 700263 and the number of cords needed. SmartRooms Qatar usually returns quotations within one working day. Lead times are estimates, confirmed with the quotation based on stock. Organisations can pay by bank transfer, cheque or purchase order, and public bodies can raise an LPO or order through a government tender such as Monaqasat. The cord carries the manufacturer's two-year warranty. If the outlet position is unclear, a free site survey can check the route before quantities are confirmed.
Request a quote for one spare or for a full set of cords for your TeamConnect Bar M rooms, and include the socket and route details for each site.
Highlights
- Article 700263, supplied for the TeamConnect Bar M
- Cord length 5.9 ft (about 1.8 m)
- Package includes a quick guide and a safety guide
- No battery included in the package
- Manufacturer warranty of two years
Room fit
Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
2 specifications · Source: manufacturer · checked Oct 2026
Logistics1
- Warranty (years)
- 2
Battery & Power1
- Battery included
- N
Downloads
0 files from the manufacturerNo downloadable files are listed for this model yet. Ask us and we will send the datasheet.
Questions about Power Cord CN for TC Bar M
Is the Sennheiser Power Cord CN the right cord for a TeamConnect Bar M?
Yes. Article 700263 is listed as the power cord for the TeamConnect Bar M, and it is sold as a standalone accessory. If you are replacing a lost or damaged cord, quote the article number when you request a quote so the team can match it to your bar. If the bar is already mounted in a Doha meeting room, send a photo of the outlet and cable route with your request.
How long is the cord, and is that long enough for my room?
The cord is 5.9 ft, about 1.8 m. Measure from the bar's power input along the full route to the nearest outlet, allowing for any wall channel or cable tray. Do not join two cords to make up a shortfall. Instead, ask SmartRooms Qatar for a free site survey before you order, so the outlet position and route are checked on site.
Does the cord suit the mains supply in Qatar?
The manufacturer data for this cord does not state its voltage rating or plug type, so compatibility cannot be confirmed from this page alone. Qatar's mains supply runs at 240 V, 50 Hz with BS 1363 (Type G) sockets. Because the model name carries a CN designation, ask the SmartRooms Qatar team to check the plug and rating against your outlet before the order is placed.
What comes in the box with the cord?
The package contains the power cord for the TeamConnect Bar M, a quick guide and a safety guide. No battery is included. Keep the safety guide with the bar's documentation so the instructions stay with the equipment for whoever installs or maintains it later.
Can I buy a spare cord for a bar that is already in use?
Yes, and a spare is sensible for rooms in regular use, so a damaged or disconnected cord does not stop a scheduled meeting. Give the bar model and article number 700263 in your request, and state how many spares you need. Lead times are estimates confirmed in the quotation, based on stock.
Which rooms in Qatar benefit from a spare TeamConnect Bar M cord?
Boardrooms in West Bay or Lusail often place the bar on a credenza with a limited cord route, so a spare saves a rushed replacement. Schools in Al Rayyan or Education City benefit when a bar moves between classrooms, and a government office in Msheireb can keep one on site. Share your room layout when requesting a quote.
How do I order several cords for a school or government office?
Submit one request listing the bar model, article number 700263 and the quantity. Public bodies can raise a purchase order (LPO) or order through a government tender such as Monaqasat. SmartRooms Qatar usually returns quotations within one working day, and payment can be made by bank transfer, cheque or purchase order.
Is the cord covered by a warranty?
Yes. The manufacturer data gives a warranty period of two years for this accessory, and the manufacturer's warranty applies. Keep your invoice with the cord, so the purchase date can be shown if a fault appears. For warranty handling, quote the article number 700263 and describe the fault when you contact the team.
Do I need a site survey before ordering a replacement cord?
A survey is worth arranging if the bar is wall-mounted, the outlet is far from the device, or access behind a display is tight. SmartRooms Qatar offers free site surveys, and a visit lets the team check the route, socket position and cable length before quoting. For a replacement that reaches a visible outlet close to the bar, a quotation alone may be enough.
What should I plan for when routing the cord behind a display or inside a cabinet?
Plan the route before connecting anything, because 5.9 ft leaves limited slack. Avoid sharp bends and loops, keep the cord clear of heat-producing equipment, and keep it out of foot traffic. In summer, when Qatar's indoor cooling runs hard, cable runs near warm equipment should be kept short and ventilated. Leave room to reach the connector for maintenance.
