Sennheiser TeamConnect Ceiling 2 White

Name: Sennheiser TeamConnect Ceiling 2 White Ceiling Microphone Array
Brand: Sennheiser
SKU: sennheiser-teamconnect-ceiling-2-white-507488
Availability: InStock

Overview

The TeamConnect Ceiling 2 White is a square, 590 x 590 mm ceiling microphone array for meeting rooms, lecture halls and collaboration spaces. Its white finish suits light-coloured ceilings, and it adds two Dante network audio ports to a 3-pin analog output. It is certified for Microsoft Teams and Zoom and carries a five-year manufacturer warranty. Suited to Qatar boardrooms, universities and training rooms running networked AV.

A ceiling array that takes the place of one tile

The TeamConnect Ceiling 2 White is a square ceiling microphone array in white, measuring 590 x 590 x 43 mm, designed to replace a standard ceiling tile. Fitting it in the ceiling rather than on the table keeps desks clear of cables and lets furniture be rearranged without re-routing audio. Its 28 electret condenser capsules are made in Germany, and patented automatic dynamic beamforming with TruVoicelift helps it pick up speech from across the room.

Why the white model suits networked AV rooms

This version carries two RJ-45 Digital Dante Network Audio ports, labelled primary and secondary, alongside a single 3-pin terminal for analog output. The data lists 4 ms latency, a frequency response of 160 Hz to 18,000 Hz, a maximum sound pressure level of 104 dB SPL and a signal-to-noise ratio of 83 dB(A). The black version lists analog output only, so the white model is the choice for Dante-based systems.

Speech handling also includes Exclusion Zones, which tell the array to ignore chosen areas of the room, and a Priority Zone for favouring one area. Camera Control uses talker position data so a compatible camera can follow the active speaker. The array is certified for Microsoft Teams, Zoom, DingTalk and Tencent and supports IEEE 802.1x for network access control.

Where it fits in Qatar

Boardroom at a ministry or authority in Doha: the table stays clear of pods and papers, while participants seated anywhere around it are picked up cleanly.
Lecture hall at a university in Education City: Priority Zone can keep pickup focused on the lectern, and Camera Control can follow the speaker where a compatible camera is installed.
Corporate training room in West Bay or Lusail: the Dante ports connect the array to an existing networked audio system, and the 4 ms latency keeps the signal responsive in group sessions.

What to plan before ordering

Measure the ceiling void and the grid for the 590 x 590 mm footprint.
The product data lists 700 x 700 x 130 mm as well as 590 x 590 x 43 mm, so confirm clearance on site.
Confirm the 5670 g (about 5.67 kg) weight with the ceiling contractor.
Choose Dante or analog output before ordering, as the cabling differs.
Confirm the room environment: the data gives 20 to 95 percent humidity, non-condensing, but no temperature range.

SmartRooms Qatar offers free site surveys, so the ceiling and network can be checked before you commit. To request a quote for the TeamConnect Ceiling 2 White, send your room size, ceiling type and network setup, and we will usually return a quotation within one working day.

Highlights

Two RJ-45 Digital Dante Network Audio ports, primary and secondary
One 3-pin terminal for analog audio output
4 ms latency and 160 Hz to 18,000 Hz frequency response
Certified for Microsoft Teams, Zoom, DingTalk and Tencent
590 x 590 x 43 mm body designed to replace a ceiling tile
Five-year manufacturer warranty

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

46 specifications · Source: manufacturer · checked Oct 2026

Logistics1

Warranty (years): 5

Product Features1

Color HEX: #000000

Product4

Transducer type: Pre-polarised condenser
Color: Black
Latency (ms): 4 ms
Warranty AMER (years): 5

Frequency Specifications1

Audio frequency response: 160 Hz to 18,000 Hz

Acoustic Properties4

Dynamic range (>): 93 dB(A)
Equivalent noise level (db): 11 dB(A)
Max. sound pressure level: 104 dB SPL
Signal-to-noise ratio: 83 dB(A)

Connectivity1

Connection: Wired

Inputs/Outputs1

Audio output: 1 x 3-pin terminal (fits Phoenix contact MCVW 1.5-3-ST-3.81)

Ambient Conditions1

Operating relative humidity (≤ %): 20 to 95%, non-condensing

Battery & Power2

Battery included: N
Power consumption (Amp): Max. 8.8 W

Electrical Properties1

Sensitivity: 0 dBV/Pa (988 mV/Pa)

Dimensions5

Dimensions: 590 x 590 x 43 mm
Product weight (g): 5670
Product height: 130
Product length: 700
Product width: 700

TeamConnect Ceiling 2 White24

article_number: 507488
specs · Logistics · Warranty (years): 5
specs · Product Features · Color HEX: #FFFFFF
specs · Product · Transducer type: Pre-polarised condenser
specs · Product · Color: White
specs · Product · Latency (ms): 4 ms
specs · Product · Warranty AMER (years): 5
specs · Frequency Specifications · Audio frequency response: 160 Hz to 18,000 Hz
specs · Acoustic Properties · Dynamic range (>): 93 dB(A)
specs · Acoustic Properties · Equivalent noise level (db): 11 dB(A)
specs · Acoustic Properties · Max. sound pressure level: 104 dB SPL
specs · Acoustic Properties · Signal-to-noise ratio: 83 dB(A)
specs · Connectivity · Connection: Wired
specs · Inputs/Outputs · Audio output: 1 x 3-pin terminal (fits Phoenix contact MCVW 1.5-3-ST-3.81); 2 x Digital Dante Network Audio (RJ-45 Primary and Secondary)
specs · Ambient Conditions · Operating relative humidity (≤ %): 20 to 95%, non-condensing
specs · Battery & Power · Battery included: N
specs · Battery & Power · Power consumption (Amp): Max. 8.8 W
specs · Electrical Properties · Sensitivity: 0 dBV/Pa (988 mV/Pa)
specs · Dimensions · Dimensions: 590 x 590 x 43 mm
specs · Dimensions · Product weight (g): 5670
specs · Dimensions · Product height: 130
specs · Dimensions · Product length: 700
specs · Dimensions · Product width: 700
in_the_box: (1) TeamConnect SL Ceiling 2 Microphone Array · (1) 3-pin Phoenix connector (3.81 mm) · (8) Self-adhesive rubber feet · (1) Instruction manual · (1) Supplement sheet with manufacturer declarations

Downloads

0 files from the manufacturer

No downloadable files are listed for this model yet. Ask us and we will send the datasheet.

Questions about TeamConnect Ceiling 2 White

How is the TeamConnect Ceiling 2 White different from the black model?

The main difference listed in the data is the output. The White model provides two RJ-45 Digital Dante Network Audio ports, marked primary and secondary, in addition to a 3-pin terminal for analog audio. The Black model lists only the 3-pin analog terminal. Both share the 590 x 590 x 43 mm body, 4 ms latency, 160 Hz to 18,000 Hz response and five-year warranty. If your room runs Dante, choose White; if you need the black finish without Dante, choose Black. Ask our team to confirm the best fit.

What do the Dante ports on the White model do?

They carry networked audio over standard Ethernet cabling, so the array can feed a Dante-enabled mixer, DSP or amplifier without a separate analog run. The data lists two RJ-45 ports labelled primary and secondary. Connect the primary port first; the secondary port gives the array a second Dante connection. Before ordering, confirm that your network switch and the rest of the audio chain support Dante. Our team can review the network plan during the free site survey.

Which video platforms is it certified for?

The array is certified for Microsoft Teams, Zoom, DingTalk and Tencent. If your meetings run on another platform, check its compatibility before ordering, because the certification list is the reference. The data also lists IEEE 802.1x support, which your IT team should review when the array joins a corporate network. Send your platform details with your request, and quotations are usually issued within one working day.

Will the array fit a standard ceiling grid in a Doha meeting room?

The data lists the body as 590 x 590 x 43 mm, and the array is designed to replace a square ceiling tile. The same product data also gives 700 x 700 x 130 mm, so measure the clearance above the grid on site. The array weighs 5670 g, about 5.67 kg, so the ceiling contractor should confirm that the grid and ceiling void can carry that load. SmartRooms Qatar offers free site surveys to check this before you order.

How is the array powered, and how much does it draw?

The data lists maximum power consumption of 8.8 W, lists PoE as a feature, and states that no battery is included. The product data does not list a separate power supply in the box, so confirm the power method with the SmartRooms Qatar team before ordering. Check that your network switch or PoE injector supplies the required power alongside the Dante network design. The box includes a 3-pin Phoenix connector with 3.81 mm pitch for the analog output.

Can it be installed in an air-conditioned office in Qatar, and what about heat?

The data gives an operating relative humidity of 20 to 95 percent, non-condensing, but it does not list an operating temperature range. For that reason, confirm the ambient temperature in the room and the ceiling void with SmartRooms Qatar before installation, especially if the room sits beside external walls or roof plant that heats up in summer. The array is a ceiling-tile fitting intended for indoor installation.

Is it suitable for a boardroom in a government ministry in Doha?

Yes, a boardroom where attendees sit around a central table is a typical fit. Mounted in the ceiling, the array keeps the table free of pods, so papers and laptops stay in place, while the 28-capsule array picks up speech from seats across the table. Exclusion Zones can be set to ignore a chosen part of the room. Plan the tile replacement during a free site survey, and confirm your network setup before ordering.

Would it work for a lecture hall at a university in Education City?

The Priority Zone feature can focus pickup on a chosen area, such as the lectern or presenter position. Camera Control uses talker position data, so a compatible camera can follow the active speaker. The 160 Hz to 18,000 Hz frequency response provides a broad base for clear speech. For larger halls, decide the number of arrays after a site survey rather than assuming one unit covers the whole room, and request a quote that reflects the layout.

Is it right for a corporate training room in West Bay that already runs an AV network?

Yes, the White model suits a training room built around Dante. Its two RJ-45 ports connect the array directly to the network, and the 4 ms latency keeps the audio responsive. The 104 dB SPL maximum sound pressure level and 83 dB(A) signal-to-noise ratio are useful for group discussion. Before ordering, review the Dante network with your IT team, then request a quote that states how many units the room needs.

Does it suit hotel conference rooms in The Pearl or Lusail that host events?

Yes, especially for rooms whose layout changes between events. Mounted in the ceiling, the array means tables do not need microphones that move with each setup, and the data notes that the design supports flexible furniture arrangement without cables on tables. Each room's ceiling should still be inspected before installation. Request a free site survey to confirm the tile replacement and the number of units before you commit to a quotation.

What should a Doha company check before using it for meetings with teams abroad?

First, confirm that your meeting platform is among the certified options: Microsoft Teams, Zoom, DingTalk or Tencent. Then review the network settings against the IEEE 802.1x requirement and confirm that external connections are allowed through your firewall. The 4 ms latency in the array supports responsive audio on international calls, but overall call quality also depends on your internet connection. Send the room size and platform details to SmartRooms Qatar when you request a quote.