Sennheiser TeamConnect Ceiling M Plus F-W

Name: Sennheiser TeamConnect Ceiling M Plus F-W Ceiling Microphone Array
Brand: Sennheiser
SKU: sennheiser-teamconnect-ceiling-m-plus-f-w-700507
Availability: InStock

Overview

The Sennheiser TeamConnect Ceiling M Plus F-W is a wired ceiling microphone array with a white front plate, built for medium and large flexible meeting rooms. It picks up speech up to 4.3 m away in spaces up to 60 m², using automatic dynamic beamforming and 15 German-engineered capsules. Setup runs in a browser, and DeviceHub lets IT teams manage units remotely. It suits Doha offices, Education City seminar rooms and government meeting rooms that need clear audio without visible clutter.

What the TeamConnect Ceiling M Plus F-W is

The F-W is the white-front-plate version of the TeamConnect Ceiling M Plus range from Sennheiser. It is a wired ceiling microphone array designed for flexible collaboration rooms where a table-top microphone would be awkward. It mounts flush into the ceiling, so the room keeps a clean look while the array covers the seating area below.

The listed measurements are 590.8 x 590.8 x 45.8, and the unit weighs 4,100 g. It is a substantial fixture rather than a small device, so the ceiling opening and support should be planned before the unit arrives.

Audio facts that matter in a meeting room

Pickup: up to 4.3 m (14 ft) across spaces up to 60 m² (646 ft²)
Frequency response: 100 Hz to 16,000 Hz
Signal-to-noise ratio: 79 dB(A), with a dynamic range of 83 dB(A)
Maximum sound pressure level: 98 dB SPL
Power consumption: approximately 8 W

The array uses patented automatic dynamic beamforming and 15 German-engineered capsules. Beamforming concentrates on people speaking in the room and reduces background noise, which helps remote participants in Doha or abroad follow the discussion. TruVoiceLift lifts in-room voices naturally, and automatic speaker-position detection supports camera tracking when a camera is part of the system.

Setup, management and integration

Configuration and control are browser-based, so an integrator can set up and adjust the array without complicated tools. DeviceHub provides cloud-based device management for monitoring and control from one place, while PartnerLink allows direct configuration within third-party AV platforms. Connection options include single cable, split mode and daisy-chain. Audio leaves through one 3-pin terminal that fits the Phoenix contact MCVW 1.5-3-ST-3.81 connector supplied in the box. The unit has no on/off switch and enters an energy-saving standby mode.

Where it fits in Qatar

Ministry or authority boardroom in Msheireb: a medium room with a central table, where the microphone stays out of sight while participants join from other offices across Doha.
University seminar room in Education City: a flexible teaching space where students at the back are picked up without passing a microphone around the room.
Bilingual corporate office in Lusail: a room where speakers switch between Arabic and English within one discussion, with coverage kept within the 60 m² rating.

What to plan before ordering

Confirm that the room falls within the stated coverage and that speakers will sit within about 4.3 m of the array. Check the ceiling void for the flush mount kit, the Chicago plenum connection box cover plate and the suspension kit, and use the drilling templates supplied. The safety rope is part of the kit and should be built into the installation plan. SmartRooms Qatar offers free site surveys to confirm ceiling height, cable routes and room layout before installation. The listed relative humidity range is 20 to 95% non-condensing, and no operating temperature range is given in the source data, so ask the team to review cooling and ceiling conditions in the room.

Request a quote

Send SmartRooms Qatar your room dimensions, ceiling type and the AV platform you use, and we will return a quotation usually within one working day. Multi-room projects can be ordered under a purchase order or LPO, and we deliver to all eight municipalities of Qatar. Request a quote for the TeamConnect Ceiling M Plus F-W today.

Highlights

Pickup up to 4.3 m (14 ft) in spaces up to 60 m²
15 German-engineered capsules with automatic dynamic beamforming
Frequency response from 100 Hz to 16,000 Hz
Browser-based setup and cloud management through DeviceHub
Single cable, split mode and daisy-chain connection options
Five-year warranty listed by the manufacturer

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

46 specifications · Source: manufacturer · checked Oct 2026

Logistics1

Warranty (years): 5

Product Features2

Color HEX: #FFFFFF
On/off switch: No

Product3

Transducer type: Pre-polarised condenser
Color: White
Warranty AMER (years): 2

Frequency Specifications1

Audio frequency response: 100 Hz to 16,000 Hz

Acoustic Properties4

Dynamic range (>): 83 db(A)
Equivalent noise level (db): 15 db(A)
Max. sound pressure level: 98 dB SPL
Signal-to-noise ratio: 79 dB(A)

Connectivity1

Connection: Wired

Inputs/Outputs1

Audio output: 1 x 3-pin terminal (fits Phoenix contact MCVW 1.5-3-ST-3.81)

Ambient Conditions2

Microphone pickup range: up to 4.3 m (14 ft)
Operating relative humidity (≤ %): 20 to 95%, non-condensing

Battery & Power2

Battery included: N
Power consumption (Amp): Approx. 8 W

Electrical Properties1

Sensitivity: 0 dBV/Pa (1020 mV/Pa)

Dimensions4

Product weight (g): 4100
Product height: 45.8
Product length: 590.8
Product width: 590.8

TeamConnect Ceiling M Plus F-W24

article_number: 700507
specs · Logistics · Warranty (years): 5
specs · Product Features · Color HEX: #FFFFFF
specs · Product Features · On/off switch: No
specs · Product · Transducer type: Pre-polarised condenser
specs · Product · Color: White
specs · Product · Warranty AMER (years): 2
specs · Frequency Specifications · Audio frequency response: 100 Hz to 16,000 Hz
specs · Acoustic Properties · Dynamic range (>): 83 db(A)
specs · Acoustic Properties · Equivalent noise level (db): 15 db(A)
specs · Acoustic Properties · Max. sound pressure level: 98 dB SPL
specs · Acoustic Properties · Signal-to-noise ratio: 79 dB(A)
specs · Connectivity · Connection: Wired
specs · Inputs/Outputs · Audio output: 1 x 3-pin terminal (fits Phoenix contact MCVW 1.5-3-ST-3.81)
specs · Ambient Conditions · Microphone pickup range: up to 4.3 m (14 ft)
specs · Ambient Conditions · Operating relative humidity (≤ %): 20 to 95%, non-condensing
specs · Battery & Power · Battery included: N
specs · Battery & Power · Power consumption (Amp): Approx. 8 W
specs · Electrical Properties · Sensitivity: 0 dBV/Pa (1020 mV/Pa)
specs · Dimensions · Product weight (g): 4100
specs · Dimensions · Product height: 45.8
specs · Dimensions · Product length: 590.8
specs · Dimensions · Product width: 590.8
in_the_box: (1) TCC M Plus Conferencing microphone · (1) Front plate white · (1) Flush mount kit · (1) Chicago plenum connection box cover plate · (1) Drilling templates · (1) Phoenix connector · (1) Safety rope · (1) Suspension kit

Downloads

0 files from the manufacturer

No downloadable files are listed for this model yet. Ask us and we will send the datasheet.

Questions about TeamConnect Ceiling M Plus F-W

Is the F-W suited to a medium meeting room in West Bay?

Yes, if the room is up to about 60 m² (646 ft²) and speakers sit within 4.3 m (14 ft) of the array. It is designed for medium and large flexible collaboration spaces, so a West Bay boardroom with mixed seating is a good match. If the table is very long, a site survey can confirm whether the position of the unit covers every seat.

What is the difference between the F-W and the F-B?

The main difference is the front plate colour. The F-W has a white front plate, while the F-B has a black one. Both list the same audio specifications, including a 100 Hz to 16,000 Hz frequency response, a 79 dB(A) signal-to-noise ratio and a weight of 4,100 g. Choose the white version when ceiling and room finishes are light, so the unit blends in.

Can it pick up students at the back of an Education City seminar room?

The rated pickup distance is up to 4.3 m (14 ft) in spaces up to 60 m², so it suits rooms where the furthest student sits within that range. In long or tiered rooms, mount the array centrally and check the layout during the site survey. Automatic dynamic beamforming with 15 capsules is designed to focus on active speakers and reduce background noise.

Can IT teams configure it from a browser?

Yes. Setup and control are browser-based. DeviceHub provides cloud-based device management for visibility and control, which helps IT teams managing several rooms in Doha to oversee units from one place. PartnerLink allows configuration within third-party AV platforms, so confirm with the SmartRooms Qatar team which platform your room will use before ordering.

How does it connect to an existing conferencing system?

The connection is wired. Audio leaves through one 3-pin terminal that fits the Phoenix contact MCVW 1.5-3-ST-3.81, and a Phoenix connector is included in the box. Single cable, split mode and daisy-chain options are available. PartnerLink integration depends on the platform in use, so confirm the audio processing or conferencing setup with SmartRooms Qatar before buying several units.

What should a contractor check in a suspended ceiling before fitting the F-W in a new Doha meeting room?

Check the depth and access of the ceiling void for the flush mount kit, the Chicago plenum connection box cover plate and the suspension kit. The unit measures 590.8 x 590.8 x 45.8 and weighs 4,100 g, so confirm that the ceiling structure can carry it. Use the drilling templates supplied and keep the safety rope in the installation plan. A free site survey from SmartRooms Qatar can check these points before ordering.

Will it suit a ministry boardroom in Msheireb where air-conditioning runs all day?

The listed operating relative humidity is 20 to 95% non-condensing, but the source data gives no operating temperature range, so performance at the extremes of a Qatari summer cannot be confirmed from the specifications. Ask SmartRooms Qatar to review the room's cooling and ceiling conditions before installation. The listed power consumption is approximately 8 W.

Does it have an on/off switch, and how much power does it draw?

No, the unit has no on/off switch. Its listed power consumption is approximately 8 W, and it enters an energy-saving standby mode. No battery is included. The maximum sound pressure level is listed at 98 dB SPL, and the dynamic range at 83 dB(A), which are useful figures when comparing it with other ceiling arrays.

Can a company in Lusail equip several rooms under one purchase order?

Yes. SmartRooms Qatar accepts purchase orders and LPOs, and payment can be made by bank transfer, cheque or purchase order. Send the dimensions and ceiling type of each room, and the team will return a quotation usually within one working day. We deliver to all eight municipalities of Qatar, and professional installation is available.

Is there a warranty, and what does a site survey cover?

The manufacturer data lists a five-year warranty for this model. A free site survey from SmartRooms Qatar checks whether the room size fits the 4.3 m pickup and 60 m² coverage, the ceiling void, the cable route from the audio output and the location of the conferencing system. Request a quote to arrange the survey.