Sennheiser TeamConnect Ceiling Medium S-W

Name: Sennheiser TeamConnect Ceiling Medium S-W, White Ceiling Microphone Array
Brand: Sennheiser
SKU: sennheiser-teamconnect-ceiling-medium-s-w-700294
Availability: InStock

Overview

The Sennheiser TeamConnect Ceiling Medium S-W is a white ceiling microphone array for meeting rooms, boardrooms and lecture spaces, sold as a complete kit. It uses 15 electret condenser capsules with patented automatic beamforming, is PoE powered, certified for Microsoft Teams and carries a five-year manufacturer warranty. Doha offices and universities running hybrid sessions with overseas teams will find it a tidy ceiling-mounted alternative to table microphones. Request a quote from SmartRooms Qatar.

What the S-W kit delivers in a meeting room

The TeamConnect Ceiling Medium S-W is a white ceiling microphone array built around 15 electret condenser capsules made in Germany. Its patented automatic dynamic beamforming adapts pickup to where people are speaking, so the room does not depend on a microphone placed on the table in front of each speaker. The model is sold only as a complete kit. The box holds the TCC M conferencing microphone, a white front plate, a white design housing, a Chicago plenum connection box cover plate, drilling templates, a Phoenix connector, a safety rope and a suspension kit.

The listed audio frequency response runs from 100 Hz to 16,000 Hz, with a maximum sound pressure level of 98 dB SPL, a signal-to-noise ratio of 79 dB(A) and a dynamic range above 83 dB(A). These figures describe how cleanly the array captures ordinary conversation across a room, which decides whether remote participants can follow a discussion without strain.

Power, connectivity and software

The array is PoE and PoE+ powered and supports single-cable mode, with daisy chaining listed for multiple units. Typical power consumption is approximately 8 W. It is certified for Microsoft Teams. For IT teams that sign off network access, the data lists an encrypted Sennheiser Sound Control Protocol API (SSCv2) using TLS 1.2 and support for IEEE 802.1x.

The device is password protected by default and must be initialised with Sennheiser Control Cockpit before first use. Audio stays muted until initialisation is complete, so the setup step should be planned into commissioning rather than left until the room is handed over.

Audio output: one 3-pin terminal that fits the Phoenix contact MCVW 1.5-3-ST-3.81 connector
Sensitivity: 0 dBV/Pa (1020 mV/Pa)
Operating humidity: 20 to 95 percent, non-condensing

Where it fits in Qatar

Boardroom in West Bay: A ceiling array removes the table-top clutter of separate microphones and keeps the boardroom table clear for documents and devices. The feature list includes exclusion and priority zones, which are designed to shape where the array listens, which helps when a room has equipment or doors that create unwanted sound.

Seminar room at a university in Education City: A lecturer who moves around the front of the room does not need a handheld or lapel microphone. Camera control via talker position data, a listed feature, can help a compatible system follow whoever is speaking.

Hybrid meeting room in Lusail: Teams in Doha and colleagues abroad join the same call on Microsoft Teams. The array picks up participants across the room, which suits offices that meet with overseas teams during the working week from Sunday to Thursday.

What to plan before you order

Check the ceiling void depth, tile type and fixing points before choosing between flush, surface, suspended or VESA mounting.
The listed footprint is 407 by 407 and the S-W height is 27, in millimetres. The unit weighs 4,900 g.
Confirm that the PoE switch or injector at the ceiling location can power the unit.
The data gives an operating humidity range but no operating temperature range, so confirm the room and ceiling conditions with SmartRooms Qatar.

SmartRooms Qatar offers free site surveys, and quotations are usually issued within one working day. Delivery covers all 8 municipalities of Qatar, and professional installation is available. Send us your room size, ceiling type and number of rooms, and request a quote for the TeamConnect Ceiling Medium S-W.

Highlights

Certified for Microsoft Teams
PoE and PoE+ powered, with single-cable mode
Dante or analogue output options listed
Patented automatic dynamic beamforming with 15 electret capsules
Max 98 dB SPL; 100 Hz to 16,000 Hz frequency response
Five-year manufacturer warranty; sold only as a kit

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

42 specifications · Source: manufacturer · checked Oct 2026

Logistics1

Warranty (years): 5

Product Features1

Color HEX: #000000

Product3

Transducer type: Pre-polarised condenser
Color: Black
Warranty AMER (years): 5

Frequency Specifications1

Audio frequency response: 100 Hz to 16,000 Hz

Acoustic Properties4

Dynamic range (>): 83 db(A)
Equivalent noise level (db): 15 db(A)
Max. sound pressure level: 98 dB SPL
Signal-to-noise ratio: 79 dB(A)

Connectivity1

Connection: Wired

Inputs/Outputs1

Audio output: 1 x 3-pin terminal (fits Phoenix contact MCVW 1.5-3-ST-3.81)

Ambient Conditions1

Operating relative humidity (≤ %): 20 to 95%, non-condensing

Battery & Power2

Battery included: N
Power consumption (Amp): Approx. 8 W

Electrical Properties1

Sensitivity: 0 dBV/Pa (1020 mV/Pa)

Dimensions4

Product weight (g): 4900
Product height: 92
Product length: 407
Product width: 407

TeamConnect Ceiling Medium S-W22

article_number: 700294
specs · Logistics · Warranty (years): 5
specs · Product Features · Color HEX: #FFFFFF
specs · Product · Transducer type: Pre-polarised condenser
specs · Product · Color: White
specs · Product · Warranty AMER (years): 5
specs · Frequency Specifications · Audio frequency response: 100 Hz to 16,000 Hz
specs · Acoustic Properties · Dynamic range (>): 83 db(A)
specs · Acoustic Properties · Equivalent noise level (db): 15 db(A)
specs · Acoustic Properties · Max. sound pressure level: 98 dB SPL
specs · Acoustic Properties · Signal-to-noise ratio: 79 dB(A)
specs · Connectivity · Connection: Wired
specs · Inputs/Outputs · Audio output: 1 x 3-pin terminal (fits Phoenix contact MCVW 1.5-3-ST-3.81)
specs · Ambient Conditions · Operating relative humidity (≤ %): 20 to 95%, non-condensing
specs · Battery & Power · Battery included: N
specs · Battery & Power · Power consumption (Amp): Approx. 8 W
specs · Electrical Properties · Sensitivity: 0 dBV/Pa (1020 mV/Pa)
specs · Dimensions · Product weight (g): 4900
specs · Dimensions · Product height: 27
specs · Dimensions · Product length: 407
specs · Dimensions · Product width: 407
in_the_box: (1) TCC M Conferencing microphone · (1) Front plate white · (1) Design housing white · (1) Chicago plenum connection box cover plate · (1) Drilling templates · (1) Phoenix connector · (1) Safety rope · (1) Suspension kit

Downloads

0 files from the manufacturer

No downloadable files are listed for this model yet. Ask us and we will send the datasheet.

Questions about TeamConnect Ceiling Medium S-W

Who is the TeamConnect Ceiling Medium S-W for?

It suits meeting rooms, boardrooms and seminar spaces where a ceiling-mounted microphone is preferred to table units. Typical buyers include office fit-outs in West Bay and Lusail and universities running hybrid sessions. Its 100 Hz to 16,000 Hz frequency response and 98 dB SPL maximum level cover normal speech and presentations in a medium-sized room. Confirm the room size and ceiling type with SmartRooms Qatar before ordering.

Is the S-W sold as a single microphone?

No. The manufacturer data states that this model can only be purchased as a kit. The box contains the TCC M conferencing microphone, a white front plate, a white design housing, a Chicago plenum connection box cover plate, drilling templates, a Phoenix connector, a safety rope and a suspension kit. Ask SmartRooms Qatar to confirm the kit contents match your mounting plan when you request a quote.

How is the microphone powered and cabled?

The array is PoE and PoE+ powered and supports single-cable mode, with daisy chaining listed for multiple units. Its approximate power consumption is 8 W. Before ordering, check that the network switch or injector at the ceiling location can supply PoE to the unit, and plan cable routes through the ceiling void. SmartRooms Qatar can review the switch and cabling during the free site survey.

What is the difference between the S-W and the F-W?

Both are white and share the same frequency response, sound pressure level, signal-to-noise ratio and weight of 4,900 g. The S-W lists a height of 27 and includes a white design housing, while the F-W lists 46 and includes a white front plate only. Choose between them based on ceiling depth and the housing finish you need, and confirm the choice with SmartRooms Qatar when you request a quote.

Is it certified for Microsoft Teams, and does it suit hybrid meetings with overseas teams?

Yes, the source data lists the unit as certified for Microsoft Teams. For a Doha office holding hybrid meetings with colleagues abroad, the ceiling array is designed to pick up speakers across the room rather than only the person nearest a table microphone. The data does not cover other conferencing platforms, so confirm your platform and room setup with SmartRooms Qatar before ordering.

How well does it pick up speakers in a large West Bay boardroom?

The array uses patented automatic dynamic beamforming, which adapts pickup to the talker's position. The data lists a signal-to-noise ratio of 79 dB(A) and a dynamic range above 83 dB(A). For a large boardroom, base the layout on seat count and ceiling position, and ask SmartRooms Qatar to check placement during the free site survey before any drilling takes place.

What do exclusion and priority zones do in a lecture or seminar room?

Exclusion and priority zones are listed features designed to shape where the array listens. In a lecture or seminar room at a university in Education City, they can help the array focus on the front of the room and reduce pickup from areas you do not want. The data also lists Intelligent Noise Control. Ask the SmartRooms Qatar team how the zones should be set for your room layout during planning.

What must be done before the microphone is used for the first time?

The unit is password protected by default and must be initialised with Sennheiser Control Cockpit before first use. Audio stays muted until initialisation is complete, which the manufacturer describes as a security measure. Assign a secure password and record it in your IT handover documents. Schedule this step with the installer after mounting so the room is ready for testing on the day of handover.

Can it connect to Dante or analogue audio systems?

The data lists Dante or analogue output options. The audio output is a 3-pin terminal that fits the Phoenix contact MCVW 1.5-3-ST-3.81 connector, and a Phoenix connector is included in the box. Confirm which output configuration suits your DSP, amplifier or network infrastructure before ordering, and tell SmartRooms Qatar which equipment is already installed in the rack so the right setup is quoted.

How should the array be mounted in a ceiling?

The data lists flush, surface, suspended and VESA mounting options. The kit includes a flush mount kit, a suspension kit, drilling templates, a safety rope and a Chicago plenum connection box cover plate. The listed footprint is 407 by 407 and the S-W height is 27, in millimetres. Check the ceiling void depth, tile type and load-bearing points before work begins, and use the free SmartRooms Qatar site survey to confirm the plan.

Will it work in Qatar's heat and humidity?

The data lists an operating relative humidity range of 20 to 95 percent, non-condensing, but it gives no operating temperature range. This is a ceiling conferencing microphone for indoor rooms, so it should be specified for air-conditioned spaces. Confirm the ceiling void and room conditions with SmartRooms Qatar, especially for rooms with high solar heat gain or where the air conditioning may not reach the ceiling.

Can a ministry or school buy this under an LPO or tender?

Yes. SmartRooms Qatar supplies government ministries and public and private schools through purchase orders (LPOs) and government tenders, including Monaqasat. Payment can be made by bank transfer, cheque or purchase order. A school fitting out several classrooms can issue one LPO covering multiple kits, with quotations usually issued within one working day. The manufacturer lists a five-year warranty on this model.