Yealink Video Conferencing Current

CS10-CS10-D

Name: Yealink CS10-CS10-D Low-Profile Network Ceiling Speaker
Brand: Yealink
SKU: yealink-cs10-cs10-d
Availability: InStock

Yealink CS10-CS10-D Low-Profile Network Ceiling Speaker

Priceon request

QuotationWithin 1 working day

DeliveryConfirmed with your quote, based on stock

PDFDownload datasheet

Overview

The Yealink CS10-CS10-D is a low-profile, 2-way coaxial network ceiling speaker for meeting rooms and video conferencing spaces. It draws power over PoE+ (IEEE 802.3at class 4) through a single RJ-45 port, uses a 5.7-inch woofer with a 1.1-inch tweeter, and has a nominal 120-degree coverage angle. Available as the standard CS10 or the Dante-enabled CS10-D. Request a quote for installation across your Qatar meeting rooms.

A low-profile 2-way coaxial speaker tuned for speech

The Yealink CS10-CS10-D is a network ceiling loudspeaker with a 2-way coaxial layout. A 5.7-inch (145 mm) woofer and a 1.1-inch (28 mm) tweeter share one axis, so sound comes from a single point in the ceiling. Frequency response runs from 100 Hz to 20 kHz at -6 dB, and sensitivity is 88 dB at 1 m for 1 W. The tuning emphasises the mid-range, where human speech sits, which makes the speaker suited to video calls and in-room discussion alike.

Power, dimensions and the figures to check before ordering

Power: PoE+ (IEEE 802.3at, class 4) through one RJ-45 port. The network switch must provide PoE+.
Size: 294 mm diameter by 125.8 mm high with the mesh cover; 287.2 mm by 125 mm without it.
Weight: 2,808 g without the cover mesh; the mesh adds 207 g.
Ratings: rated power 24 W, typical power 20 W, THD below 1%, nominal impedance 8 Ω.
Environment: operating range 0 to 50 °C, humidity 5% to 90%, indoor installation, Plenum Rated UL 2043.

Editions and accessories

The CS10 is the general edition. The CS10-D adds support for the Dante audio transmission protocol and integrates with a wide range of standard Dante devices, which helps when a room already runs Dante-based audio. The CS10-D is also listed as Zoom Certified. The white mesh cover is included and a black cover is optional. The manufacturer lists a detachable magnetic black mesh cover and a pendant mount enclosure as related accessories.

Where the CS10 fits in Qatar

In a boardroom in West Bay or Msheireb, where a video camera carries remote participants into the room, a centrally placed ceiling speaker keeps voices at an even level along a long table and avoids placing a speaker on the table edge. In a training room in Lusail or Education City that a movable partition divides, speaker positions can be planned for each section. In hotel meeting rooms in Doha with ceilings that hide ductwork, the low profile and compatibility with various ceiling types make the speaker easier to fit into an existing design.

Planning the installation

Confirm the ceiling type and the depth of the void behind it before ordering, and check that the ceiling can carry about 2.8 kg per unit plus the bracket. Summer heat in Qatar can push ceiling voids well above the temperature of the occupied room, so confirm that the location stays within the 0 to 50 °C operating range. A free site survey from SmartRooms Qatar can settle the layout, the cable route to the PoE+ switch and speaker spacing. Add the dust cover and bracing bridge included in the box to your checklist.

Planning audio for a meeting room? Request a quote from SmartRooms Qatar. Our team will confirm the right edition and the accessories for your ceiling type, and quotations are usually returned within one working day.

Highlights

2-way coaxial design with 5.7-inch woofer and 1.1-inch tweeter
Powered by PoE+ (IEEE 802.3at class 4) over one RJ-45 port
Frequency response 100 Hz to 20 kHz at -6 dB
Nominal 120-degree coverage angle and 8 Ω impedance
Standard CS10 or Dante-enabled CS10-D edition
Plenum Rated UL 2043, operating range 0 to 50 °C

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

29 specifications · Source: manufacturer · checked Oct 2026

Package Content1

Details: CS10 Speaker White Mesh Cover (Black Optional) Quick Start Guide Assembly Fixing Bracket Dust Cover Deployment Instruction Template Bracing Bridge Dust Cover Screw × 6 (M3 × 4CMHOZN3)

Audio Specifications4

Frequency Response (-6dB): 100-20kHz
Continuous: 99dB @20W 1m
Sensitivity: 88dB@1m 1W
Details: Maximum SPL:

Speaker Specification10

LF: 5.7 inch (145 mm) woofer
HF: 1.1 inch (28 mm) tweeter
Nominal Impedance: 8Ω
Nominal Coverage Angle: 120
Speaker Frequency Response: 100-20kHz
Sensitivity: 88dB
Sound emission angle: 120
Rated Power: 24W
Typical Power: 20W
Power Supply: PoE+ (IEEE802.3 at class 4)

Product Specifications7

Product Color: white/black
Cover Mesh Color: white/black
Cover Mesh: PC/ABS Welded SPCC
Main Body Shell: PA (Polyamide) with 15% GF
Bottom Shell: aluminum alloy
Cover Plate: PC/ABS and SGCC
Details: Size: ф294*H125.8 mm (with cover mesh） ф287.2*H125 mm (without cover mesh) Weight: 2808 g (without cover mesh)； 207 g (Cover mesh) Product Materials: Plenum Rated UL 2043 (suitable for air handling spaces)

Physical Specifications4

Operating Temperature: 0-50℃
Storage Temperature: 0-50℃
Operating Humidity: 5%~90%
Interface: 1 RJ-45

Logistic Information3

Canton Size: 398 × 355 × 185 mm
N.W/CTN: 4.628 kg
G.W/CTN: 5.597 kg

Downloads

35 files from the manufacturer

Questions about CS10-CS10-D

What is the Yealink CS10-CS10-D used for?

It is a ceiling loudspeaker for meeting rooms and video conferencing spaces. It is an active speaker with an integrated DAC that receives audio from the network over a single RJ-45 connection, so one cable carries both power and sound. Its mid-range emphasis suits human voices, which makes it practical for boardrooms, training rooms and classrooms where speech must be clear from every seat. Request a quote if you are equipping a room with a video system.

What is the difference between the CS10 and the CS10-D?

The CS10 is the general edition. The CS10-D supports the Dante audio transmission protocol and integrates with a wide range of standard Dante devices, which helps if your building audio already runs on Dante. The manufacturer's data lists the CS10-D as Zoom Certified. Both editions share the same 2-way coaxial design, 120-degree nominal coverage and PoE+ power. Tell us which edition your system needs when you request a quote.

What power and network equipment does the CS10 need?

The speaker is powered by PoE+ (IEEE 802.3at, class 4) through its single RJ-45 interface, so the switch or injector must provide PoE+ at that class. Its rated power is 24 W and its typical power is 20 W. Ask your IT team to confirm the switch power budget before ordering, especially if several ceiling speakers in a large room share one switch.

Does the CS10 need a separate amplifier?

The CS10 is an active speaker with an integrated DAC, and it receives its signal from the network through its RJ-45 connection. The package contents list no separate amplifier. Confirm your audio source and control approach with the SmartRooms Qatar team when you request a quote, so the design matches your video conferencing system.

What size is the CS10 and will it fit my ceiling?

With the mesh cover fitted, the speaker measures 294 mm in diameter and 125.8 mm high. Without the cover it measures 287.2 mm by 125 mm. Its body depth is 120 mm, which is why it is described as low-profile. The manufacturer says it suits various ceiling types and grid systems, but the ceiling cut-out, void depth and bracket fit should be checked on site. A free site survey from SmartRooms Qatar can confirm this before you place an order.

Can the CS10 be installed in an air-handling ceiling space?

The CS10 carries a Plenum Rated UL 2043 listing, which the manufacturer describes as suitable for air handling spaces. The rating matters in buildings where ducts or return air pass through the ceiling void. Before ordering, confirm that the fire and ventilation requirements of your building and project specification are met, and review this with your building engineer.

Will the CS10 cope with Qatar's summer heat?

The rated operating range is 0 to 50 °C with 5% to 90% humidity. Outdoor temperatures in Qatar can exceed 45 °C in summer, so the CS10 is designed for indoor installation and is not suited to open-air areas, covered terraces or spaces with uncontrolled heat. Check the conditions in the ceiling void and the room with the SmartRooms Qatar team before finalising locations, especially in areas with limited ventilation.

We are fitting out a West Bay boardroom with a video system. Would the CS10 suit it?

Yes, a boardroom with a central camera and a long table is a typical fit. Ceiling speakers keep voices at an even level across the seats without a bulky unit on the table, and the 120-degree nominal coverage helps spread sound across the room. Choose the CS10-D if your video system or room audio already uses Dante. Ask for a site survey to plan speaker positions and the switch location.

Our training room in Lusail splits into two sections. How should we plan it?

A divisible training room usually needs an even sound level in each section. Each CS10 is a self-contained active speaker on a single PoE+ connection, so positions can be planned around whether the partition is open or closed. Confirm the partition type and cable routes before ordering, and request a quote that states the number of units needed for each section.

Our Doha hotel meeting rooms have ceilings that hide ductwork. Will the CS10 work?

Hotel conference rooms and serviced apartment meeting spaces often have tight ceiling voids and ductwork. The CS10 measures 125.8 mm high with its cover, is compatible with various ceiling types and grid systems, and is Plenum Rated UL 2043, so it can be fitted where ducts run. A site survey before purchase helps check the clearance around ducts and the mounting points.

What is included in the box?

The package includes the CS10 speaker, a white mesh cover, a quick start guide, an assembly fixing bracket, a dust cover, a deployment instruction template, a bracing bridge and six dust cover screws. A black mesh cover is optional and is not included. The manufacturer lists a black mesh cover and a pendant mount enclosure as related accessories, which you can add to your quotation.

How can a school order several units using a purchase order?

SmartRooms Qatar accepts purchase orders (LPOs) and supplies government tenders, and payment can be made by bank transfer, cheque or purchase order. Send your unit quantities and a room list with your request, and we will return a quotation, usually within one working day. We deliver to all eight municipalities of Qatar, and the product is covered by the manufacturer's warranty.