Barco RGB Laser ODLF-721 · Price in Qatar

Name: Barco RGB Laser ODLF-721 70-inch Rear-Projection Video Wall Cube
Brand: Barco
SKU: barco-rgb-laser-odlf-721
Availability: InStock

Overview

The Barco RGB Laser ODLF-721 is a 70-inch rear-projection cube from the OverView RGB Laser series, for 24/7 control rooms. Its RGB laser light source is rated for over 125,000 hours in Normal and Eco modes, and front access removes the need for rear maintenance space. With Full HD resolution, 1800:1 contrast and a 2-year warranty, it suits operations centres in Doha, Ras Laffan and Mesaieed where space is tight.

What the Barco RGB Laser ODLF-721 is

The Barco RGB Laser ODLF-721 is a rear-projection video wall cube from the OverView RGB Laser series. Each unit presents a 70-inch diagonal image and measures 1,550 mm wide, 872 mm high and 642 mm deep. The projection module weighs under 63 kg and the support frame under 39 kg. It is built for control rooms and operations centres that run around the clock.

Brightness, colour and contrast for operators

Laser light is the main reason to choose this model. The manufacturer quotes twice the brightness of mainstream LED-lit rear-projection walls, with the highest Boost setting rated at 940 cd/m². Normal, Eco and Eco+ modes reduce output and power draw, so the room can be matched to its lighting. A Full HD panel of 1920 x 1080 pixels, 1800:1 on-screen contrast and colour up to 170% of the Rec.709 triangle keep small details readable on dense maps and multi-source layouts. Brightness uniformity is typically above 95% at ANSI 9 and above 90% at ANSI 13, and Sense X automatic calibration supports colour stability.

Front access and 24/7 reliability

Front access means the cube can be serviced without a rear maintenance area, which matters in a room where every square metre goes to consoles, desks and plant. The RGB laser light source is rated for more than 125,000 hours in Normal and Eco modes. Redundant laser banks, redundant power supply drivers and redundant input signal and external power supply paths reduce single points of failure, and the manufacturer rates the platform for more than 11 years of uninterrupted 24/7 operation. Noise is below 20 dB when measured 3 metres in front of the unit.

Where it fits in Qatar

Traffic and incident management in Doha: a room in West Bay or Msheireb where operators monitor maps, camera feeds and status boards across rotating shifts. The high brightness helps keep the room lit rather than dimmed.
Energy operations at Ras Laffan or Mesaieed: a control room where floor space is tight and access behind the wall is limited, so front-only service is a practical advantage.
Campus or hospital command rooms in Education City or Al Sadd: a safety or bed-management room where a wide wall must hold a steady picture through long shifts.

Planning the installation and requesting a quote

The cubes operate between 10°C and 40°C at up to 80% humidity, non-condensing. Qatar summer temperatures can exceed 45°C, so the room must be air-conditioned and kept within that range. The AC input range of 100–240 VAC at 50–60 Hz covers Qatar's 240 V, 50 Hz mains supply. Connections include two DP1.2 inputs with one output, two HDMI 2.0 inputs (4K at 60 Hz), two Ethernet ports and two USB ports for power only.

SmartRooms Qatar offers a free site survey to check floor loading, access routes and ventilation before installation. We supply, deliver to all eight municipalities of Qatar and install professionally, and accept purchase orders (LPOs) and government tenders through Monaqasat. The product carries the manufacturer's 2-year warranty. Request a quote and our team will usually reply within one working day with a configuration for your room.

Highlights

Two times the brightness of mainstream LED-lit rear-projection walls
Boost mode rated up to 940 cd/m² with lower-power Normal, Eco and Eco+ modes
Front access, so no rear maintenance area is needed
Light source rated above 125,000 hours in Normal and Eco modes
Full HD 1920 x 1080 resolution with 1800:1 on-screen contrast
Redundant laser banks, power supply drivers and input signal paths

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

25 specifications · Source: manufacturer · checked Oct 2026

General Specifications25

Dimensions: • Diagonal: 70" (Approx.) • Width: 1,550 mm | 61.02" • Height: 872 mm | 34.33" • Depth: 642 mm | 25.28" • Weight: Projection Module: < 63 kg | 139 lbs • Weight: Support frame: < 39 kg | 86 lbs
Resolution: Full HD (1920 x 1080 pixels)
On-screen contrast: 1800:1
Color: Up to 170% REC709 color triangle
Screen: Screen type | WV-FEL | CSI | Light source lifetime Power usage (W) (hrs) Boost | 940 cd/m² | 650 cd/m² | 60,000 | 260 Normal | 730 cd/m² | 500 cd/m² | 125,000 | 200 Eco | 365 cd/m² | 250 cd/m² | 125,000 | 120 Eco+ | 275cd/m² | 195cd/m²² | 125,000² | 95 Mid gain type, 180° - | - | - | - viewing angle
Display technology: Rear projection DLP
Screen gap: Dependant on screen type
White point: Customized white points
Brightness uniformity: Typ. >95% ANSI 9 Typ. >90% ANSI 13
Color stability: Sense X automatic calibration
Redundancy: Redundant laser banks with redundant power supply drivers, input signal & external power supply
Light source: RGB laser (Lasers Class 1 RG2)
AC input voltage: 100 – 240 VAC, 50-60Hz
Light source lifetime: > 125,000 hrs in both Normal and Eco mode
Noise Level: Less than 20 dB (measured from 3 meters in front)
Power: 120W (eco) 200W (normal) 260W (boost)
Connectivity: 2x DP1.2 inputs & 1x output (4K@60Hz) 2x HDMI™ 2.0 inputs (4K@60Hz) 2x USB ports (only for power) 2x Ethernet ports
Conditions for operation: 10°C-40°C | 50°F-104°F Up to 80% humidity (non-condensing)
Heat dissipation: 390 BTU/h (eco) 680 BTU/h (typ) 860 BTU/h (max)
Signal processing: Loop through Cropping and scaling with wall configuration
Integration to third party equipment: WEB service API
Direct ethernet access: Built in web server
Graphical user interface: All settings and operational parameters
Warranty: 2 years
Notes: (1) In general, rear projection video walls have no bezels, only a mechanical gap which depends on video wall configuration and operating temperatures

Downloads

2 files from the manufacturer

PDF Datasheets RGB-Laser-ODLF-721-en-Spec-sheet.pdf 489 KB URL Manuals & guides · Opens on manufacturer site Manuals, drivers and support

Questions about RGB Laser ODLF-721

What is the Barco RGB Laser ODLF-721 used for, and who is it for?

It is a 70-inch rear-projection video wall cube for control rooms, operations centres and command rooms that need a bright, colour-accurate picture around the clock. Each cube measures 1,550 mm wide, 872 mm high and 642 mm deep, so several units can form a larger wall. It suits shift-based teams in Doha, Lusail and the Industrial Area who need a dependable display for continuous monitoring.

How much brighter is it than LED-lit rear-projection video walls?

The manufacturer quotes twice the brightness of mainstream LED-lit rear-projection video walls. The highest Boost setting is rated at 940 cd/m², while Normal, Eco and Eco+ modes lower output and power use. Power draw is 260 W in Boost, 200 W in Normal and 120 W in Eco. This helps a control room in West Bay that has daylight from windows keep its wall clearly visible.

Does the cube need space behind it for maintenance?

No. Front access means the cube does not need a rear maintenance area, which suits a control room in Doha where the wall backs onto a plant room or a narrow corridor. Plan clear space at the front for servicing, and check the layout during a free site survey from SmartRooms Qatar before you order.

What resolution and contrast does the ODLF-721 offer?

The panel has a Full HD resolution of 1920 x 1080 pixels and an on-screen contrast of 1800:1. Colour reaches up to 170% of the Rec.709 colour triangle. Brightness uniformity is typically above 95% at ANSI 9 and above 90% at ANSI 13. For a control room in Al Rayyan showing dense maps or CCTV grids, these figures determine how well fine detail stays readable across the whole wall.

Which inputs and outputs does it have?

Connectivity covers two DisplayPort 1.2 inputs with one output at 4K and 60 Hz, and two HDMI 2.0 inputs at 4K and 60 Hz. There are also two Ethernet ports, and two USB ports that are used only for power. The signal loop-through feature passes a source on to the next unit in the wall. An operations room in Lusail routing workstation signals to the wall should plan its cabling around these ports before confirming the quote.

Can it operate in Qatar's summer heat?

The operating range is 10°C to 40°C at up to 80% humidity, non-condensing. Qatar summer temperatures can exceed 45°C, so the cube must sit in an air-conditioned room that keeps temperatures within that range. Heat output ranges from 390 to 860 BTU/h depending on mode. For a control room in Mesaieed or Al Khor, ask the SmartRooms Qatar team to review the cooling load before installation.

What power does it need, and does it suit Qatar mains?

The AC input is rated 100 to 240 VAC at 50 to 60 Hz, which covers Qatar's 240 V, 50 Hz supply. Power consumption is 120 W in Eco, 200 W in Normal and 260 W in Boost. Each cube needs its own outlet and circuit capacity, so a qualified electrician should confirm the socket type and rating at the installation site before the units are fitted.

How noisy is it in a boardroom or a quiet control room?

The manufacturer specifies noise below 20 dB, measured 3 metres in front of the unit. That level suits a quiet control room where operators take calls and listen for audio alerts, or a boardroom in The Pearl. When full brightness is not needed, Eco mode can be selected, which also reduces power draw.

Are there visible bezels between the cubes in a video wall?

Rear-projection walls generally have no bezels, only a mechanical gap. For this model the gap depends on the screen type, the wall configuration and operating temperatures, so it is set during design. A video wall for an operations centre in Doha should be planned with that gap in mind before the room layout is fixed.

How long does the light source last, and what warranty applies?

The light source lifetime is rated above 125,000 hours in Normal and Eco modes. The product carries the manufacturer's 2-year warranty. The manufacturer also quotes more than 11 years of uninterrupted 24/7 operation for this platform. Ask the SmartRooms Qatar team to confirm the warranty terms that apply to your order when the quotation is prepared.

Can the wall be controlled or integrated with other systems?

Integration is supported through a WEB service API, and the cube includes a built-in web server for direct Ethernet access. A graphical user interface gives access to all settings and operational parameters. Signal processing includes cropping and scaling for the wall configuration. An IT team at a government authority in Doha could link the wall to its existing control software, so confirm the integration method with SmartRooms Qatar before ordering.

How do I get a quote, and do you deliver and install in Qatar?

Request a quote and SmartRooms Qatar usually responds within one working day. We supply, deliver to all eight municipalities of Qatar and provide professional installation. Purchase orders (LPOs) and government tenders through Monaqasat are accepted, and payment can be made by bank transfer, cheque or purchase order. A school in Al Wakrah ordering several cubes for one room can issue a single LPO for the full quantity.