Marvel MWE 55in 3.5mm 800nit LCD Video Wall Panel

Name: Marvel MWE 55-inch 3.5mm Bezel 800 nit LCD Video Wall Panel
Brand: Marvel
SKU: marvel-mwe-55in-3-5mm-800nit-lcd-video-wall-panel
Availability: InStock

Overview

Built for tiled indoor walls, the Marvel MWE 55-inch panel pairs a 3.5mm splice bezel with 800 nit brightness, a 1,100:1 contrast ratio and 1920×1080 maximum resolution. Its 89-degree minimum viewing angles and CE, FCC and RoHS certifications suit retail frontages, corporate lobbies and training rooms in Doha, where a multi-screen display must stay readable from the side.

What this 55-inch video wall panel is designed to do

The Marvel MWE 55-inch panel is an indoor LCD module with an LED backlight, built to be joined with other panels into one larger display. Its 3.5mm splice bezel keeps the border between neighbouring screens narrow, so a tiled wall reads as a single picture rather than a grid of separate monitors. The panel is rated for a 16:9 format with a maximum supported resolution of 1920×1080, and the manufacturer describes its components as commercial-grade for continuous 24/7 operation.

The figures that matter for a tiled display

Brightness is rated at 800 nits with a contrast ratio of 1,100:1, a practical level for indoor areas lit by ceiling fittings. An anti-glare surface option is listed for readable content under indoor lighting, which is worth requesting for rooms with strong reflections from glass or polished floors.

Colour: 8-bit, 16.7 million colours
Splice bezel: 3.5mm
Viewing angle: 89 degrees minimum on all four sides at a contrast ratio of at least 10
Certifications: CE, FCC and RoHS

Where it fits in Qatar

In a shopping mall in West Bay or The Pearl, a tiled wall of promotional content at a store entrance draws attention without the visible seams of separate screens. In a corporate lobby in Msheireb or Lusail, the same panel can carry wayfinding, visitor information and company news. For a school or training centre in Education City or Al Sadd, a wall of panels can serve as a briefing display in a larger meeting space, where the 89-degree viewing angle helps students seated at the sides.

Mounting, power and connectivity planning

The installation options are wall mounting, floor standing, a front-repair bracket designed for front access, and cabinet floor standing. Before fixing a tiled array, book a free site survey with SmartRooms Qatar to check wall load, cable routes and access. The input is rated at AC100 to 240V, 50/60Hz, which covers Qatar's 240V, 50Hz supply. Content runs from the onboard player, with Android or Windows options depending on the model, HDMI and USB on most configurations, and Ethernet and Wi-Fi for CMS connectivity. Confirm exact ports and board options before ordering.

Customisation and requesting a quote

The manufacturer supports OEM and ODM customisation, including enclosure colour, logo, mounting method, brightness and CMS integration, with CMS Cloud or a customer's own platform. Compliance documentation is available on request, which helps with tender files. SmartRooms Qatar usually provides quotations within one working day and supports purchase orders and government tenders, including Monaqasat. Send the number of panels, the wall layout and the mounting type, and request a quote for your project.

Highlights

55-inch class LCD panel with LED backlight
3.5mm splice bezel for tiled video wall layouts
800 nit brightness and 1,100:1 contrast ratio
Maximum resolution 1920×1080 in 16:9 format
89-degree minimum viewing angle at CR≥10
CE, FCC and RoHS certifications; AC100–240V input

Plan your video wall

Rows3

Columns3

Wall size about 3.65 × 2.05 m · 9 panels

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

13 specifications · Source: manufacturer · checked Oct 2026

Specifications13

Model Number: MWE 55 inch-3.5mm 800 nit LCD Video Wall Panel
Product Type: MWE 55 inch-3.5mm 800 nit LCD Video Wall Panels 4*4
Panel Size: 55 inch (class)
Application Environment: Indoor
Panel Size (2): 55 inch LG LCD Screen (with narrow bezel 3.8mm)
Splice bezel: 3.5mm
Aspect Ratio: 16:9
Max Resolution Support: 1920×1080(H×V)
Color: 8Bit,16.7M
Brightness (nits): 800
Contrast ratio: 1100:1
Visual Angle: 89/89/89/89 (Min.)(CR≥10)
Certifications: CE / FCC / RoHS

Downloads

1 file from the manufacturer

PDF Brochures Product Catalog.pdf 37.0 MB

Questions about MWE 55in 3.5mm 800nit LCD Video Wall Panel

What is this Marvel MWE 55-inch panel mainly used for?

It is an indoor LCD panel for digital signage and video walls. The manufacturer lists retail stores and shopping malls, corporate lobbies and meeting rooms, education and training spaces, and interactive kiosks or information points as its main application scenarios. A typical Qatar fit is a tiled display in a Doha shopping mall corridor, a West Bay office reception or a training room in Education City. Choose it when you need a repeatable panel size for a multi-screen wall rather than a single large display.

How wide is the bezel between panels when they are tiled?

The splice bezel is rated at 3.5mm, which is the border width where one panel meets the next in a tiled wall. A narrow border keeps the image reading as one picture, which matters for menu boards, control rooms and lobby feature walls where a visible grid would distract viewers. Ask SmartRooms Qatar to confirm the frame arrangement for your exact array before you order mounting hardware.

Will the picture be readable in a bright room?

The panel is rated at 800 nits with a 1,100:1 contrast ratio, and an anti-glare surface option is listed for readable content under indoor lighting. For a hospital reception or bank lobby with strong ceiling lights or sun through glass, request the anti-glare option in the quotation and position the wall away from direct reflections. Viewing angles are rated at 89 degrees minimum on all four sides at a contrast ratio of at least 10.

Can I install it outdoors or where it faces a window in Doha?

No. The source data lists its application environment as indoor only. Doha summers can exceed 45°C and dust storms are common, so keep the wall away from outdoor areas and direct sunlight. No operating temperature range is given in the manufacturer data, so confirm the room's air-conditioned conditions and any window or entrance exposure with the SmartRooms Qatar team before the quotation is finalised.

What mounting options are available?

The product supports wall mounting, floor standing, a front-repair bracket designed for front access, and cabinet floor standing. For a tiled wall in a West Bay lobby or a Msheireb meeting room, wall mounting is common, but the wall's load-bearing capacity and cable routing need checking first. SmartRooms Qatar offers a free site survey that covers wall condition, cable routes and access before any panels are fixed.

What content players and connections does it support?

Content is delivered through the onboard player, with Android or Windows options depending on the model. The source notes HDMI and USB support on most configurations, plus Ethernet and Wi-Fi for CMS connectivity. Exact ports and board options must be confirmed with the manufacturer for your configuration, so state the number of video inputs and the network layout you need when requesting a quote.

Can the panels be managed remotely from a central system?

Yes, networked remote management is available on request. The manufacturer can integrate its CMS Cloud platform or a customer's preferred signage platform. For a retail group with stores across Doha, Al Rayyan and Lusail, central scheduling lets one team update every screen from one place. Confirm the exact board and CMS option for your configuration before ordering, since it determines how content is loaded and managed.

What power supply does it need in Qatar?

The input is rated at AC100 to 240V, 50/60Hz. Qatar's mains supply is 240V at 50Hz, so the rated range covers the local supply. Plan a dedicated circuit and socket position for each wall, and have your electrical contractor check the plug arrangement before installation. Ask SmartRooms Qatar to confirm the power connection supplied with your order.

Which certifications does it hold for tender files?

The product lists CE, FCC and RoHS certifications. Additional market-specific marks are confirmed per order with the manufacturer, and compliance documentation is provided on request. Government ministries and public schools often need these documents in a tender or LPO pack, so state the certificates you require in your quotation request and SmartRooms Qatar will confirm what is available for your order.

Can I order several panels for a school or ministry project?

Yes. Multi-panel orders are typically raised on a purchase order (LPO), and SmartRooms Qatar supports government tenders, including Monaqasat. Quotations are usually provided within one working day. Send the number of panels, your wall layout and the mounting type, and the team will prepare a quote covering supply, delivery to all eight municipalities and professional installation. Lead times are estimates confirmed with the quotation, based on stock.

Can the enclosure, logo or brightness be customised?

The manufacturer supports OEM and ODM customisation, including enclosure colour, logo, mounting method, brightness level and CMS integration. This suits a corporate client that wants branded frames for a lobby wall in Doha. Lead time and minimum order quantity are confirmed per project, so raise any custom requirements in your quotation request early in the planning stage.

Is it suitable for continuous operation at a busy venue?

The manufacturer describes the panel and its components as commercial-grade and designed for continuous 24/7 operation. That suits high-footfall places such as a shopping mall atrium, a hotel lobby or the arrival area near Hamad International Airport. Confirm the operating environment with SmartRooms Qatar, and ask the team for the manufacturer warranty terms that apply to your order, since the products are covered by that warranty.