INOPS6

What the INOPS6 adds to an InFocus interactive display

The INOPS6 is an OPS (Open Pluggable Specification) slot-in PC module. It fits into the rear slot of a compatible display and turns the panel into a self-contained computer, so teachers and presenters can open files, run applications and join calls without a separate PC on the desk. The manufacturer lists it as compatible with the JTouch Series 13.

Inside the module is an Intel Core i5-12450H processor, 8GB of DDR4 RAM at 2666MHz and a 256GB NVMe SSD, running Windows 11 Pro. Graphics come from Intel UHD Graphics for 12th Gen Intel processors, and the display outputs support synchronous dual display.

Hardware facts that matter for planning

• Ports: 2 x USB 3.1, 3 x USB 3.0, one USB 2.0, a USB Type-C (USB 3.1) port, a microphone input, a line-out and an RJ45 Ethernet port.
• Video outputs: HDMI 2.0 at 4K/60Hz and DisplayPort 1.4.
• Wireless: Intel Wi-Fi 6 on 2.4GHz and 5GHz, covering 802.11 a, b, g, n, ac and ax, with Bluetooth 5.2.
• Security: a hardware-based TPM 2.0 security module.
• Size and weight: 195 x 30 x 180 mm and 1.2 kg.

The module is rated at 19V DC, 4.7A, with 89W power consumption and 0.5W in standby mode. It uses a JAE 80-pin rear connector, so the module must be matched to the display before it is ordered.

Where it fits in Qatar

A government office in West Bay replacing an ageing meeting-room PC can use the INOPS6 so the display itself handles bilingual presentations and video calls with colleagues abroad, running the Windows applications the team already uses.

A private school in Al Wakrah fitting out several classrooms with the same JTouch Series 13 displays can standardise the module configuration, keeping lesson software and updates consistent from room to room. A training centre in Education City can use it for interactive lessons that need a complete computer in every room.

Placement matters too. The operating range is 0 to 45 degrees Celsius with 10% to 95% humidity, non-condensing at 40 degrees, and storage is rated from -40 to 80 degrees Celsius. Qatar summer temperatures can exceed 45 degrees, so install the display in an air-conditioned room and confirm the location with the SmartRooms Qatar team before using lobbies or window-facing spaces.

What to plan before ordering

• Confirm your display model, because the data lists compatibility with the JTouch Series 13 only.
• Check the rear slot and 80-pin connector alignment against the display documentation.
• Plan cable routing for USB devices, network connections and any external displays.
• Request a free site survey for classroom or boardroom layouts with several units.

Quotations are usually issued within one working day. Purchase orders (LPOs) and government tenders, including Monaqasat, are welcome, and the module is covered by the manufacturer's warranty. Request a quote for the INOPS6 today and tell us which display it will sit in.