SMART SMART SoundLift · Price in Qatar

Name: SMART SoundLift Classroom Voice Amplifier for SMART Boards
Brand: SMART
SKU: smart-smart-soundlift
Availability: InStock

Overview

SMART SoundLift is a wireless classroom voice amplifier that plays a teacher's voice through the built-in speakers of compatible SMART Board displays, with no separate sound system. Two wearable microphones and a pre-paired receiver come in the box. Teacher voice and lesson audio play together, and the 30 m range lets teachers move around. It suits Qatar classrooms running MX, QX or RX displays.

A classroom voice amplifier that uses the SMART Board you already own

SMART SoundLift is a wireless microphone system for teaching spaces. Its receiver connects to a compatible SMART Board and passes the teacher's voice through the panel's built-in speakers, so there is no need for a separate amplifier, mixer or speaker set. Each kit contains a receiver, two wearable microphones and two charging cases, so a teacher and a co-teacher can each wear one.

The system suits teachers who speak for long periods. Projecting over a noisy room or straining to reach the back row is tiring, and students at the back can miss parts of the lesson. Amplification lets the teacher speak at a comfortable level while every instruction reaches the whole room.

The facts that matter when you compare

Compatibility: SMART Board MX (V5), MX (V5) Plus, QX (V2) Pro and RX displays running iQ 4.7.2 or later.
Wireless range: 30 m (98 ft) with clear line-of-sight between the microphone and the receiver.
Audio path: teacher voice and SMART Board audio play at the same time, with feedback suppression and under 15 ms of audio latency.
Microphones: omnidirectional, with three gain levels (10 dB, 12 dB and 14 dB) and about 5 hours of operating time.
Charging case: up to 10 hours of operating time from a 300 mAh battery, charged through USB Type-C.
Receiver: 3.5 mm audio output, 5V USB Type-C power and a 2400-2483.5 MHz working frequency.

Where it fits in Qatar

A private school in Al Wakrah fitting out a new block of classrooms can standardise on the same kit in every teaching room, so teachers who move between rooms find the same setup. A teacher who walks from the board to the student tables and back keeps a voice that the whole room hears.

An Arabic-curriculum school in Al Sadd running bilingual lessons with video clips can keep a clip playing while the teacher explains it. The simultaneous audio path means the lesson sound does not have to stop each time the teacher speaks.

A training centre in the Industrial Area running induction sessions for a large group can keep instructions audible from the far side of a long room. Ask for a site survey so the room layout and board position are checked before the kit is ordered.

What to plan before you order

Confirm that each SMART Board is one of the supported models and runs iQ 4.7.2 or later, because the system is designed only for those displays. Check the environment too. The microphones, receiver and charging case are rated for operation between 0 and 40 degrees Celsius with 10% to 90% humidity, non-condensing, and batteries charge between 5 and 35 degrees Celsius. Summer temperatures in Qatar can exceed 45 degrees Celsius, so keep the receiver and charging cases in air-conditioned teaching spaces and confirm room conditions with the SmartRooms Qatar team.

The kit includes a mounting bracket, USB cables for the receiver and microphone charging, a 3.5 mm audio cable and installation instructions. The microphones weigh 15 g each and the receiver 40 g, so the kit is light to carry between lessons. Professional installation is available, and the product is covered by the manufacturer's warranty.

Request a quote for your classroom

Tell the SmartRooms Qatar team how many SMART Boards need amplification and which models they are. Schools and government bodies can order against a purchase order or through a tender, and we deliver to all eight municipalities of Qatar. Request a quote and we will usually respond within one working day.

Highlights

Runs through built-in speakers of compatible SMART Board displays
Two wearable microphones and a pre-paired receiver in the box
Teacher voice and SMART Board audio play at the same time
Wireless range up to 30 m with clear line-of-sight
Supports MX (V5), MX (V5) Plus, QX (V2) Pro and RX on iQ 4.7.2 or later
Rated 0 to 40 degrees Celsius, so use air-conditioned classrooms

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

58 specifications · Source: manufacturer · checked Oct 2026

Overview1

_text: The SMART SoundLift wireless microphone-based voice amplification solution can be installed on compatible SMART Board interactive displays to amplify a teacher's voice in learning environments, reducing vocal strain for teachers and assisting students absorb and process information faster and easier.; The SMART SoundLift system includes two wearable microphones and a receiver pre-paired out of the box. The receiver receives audio signals from the microphones and translates the signals into crystal-clear sound through the display's speakers.

Microphone11

Microphone technology: Omnidirectional
Gain control: Three levels (10 dB, 12 dB, 14 dB)
Maximum SPL (sound pressure level): 117.7 dB
Operating range: 98' 5" ( 30 m ) (clear line-of-sight)
Pairing method: Contact with receiver
Battery type: Rechargeable LiPo
Battery voltage: 3.7 V
Battery capacity: 100 mAh
Charge time: 2 hours
Charge method: Charging case
Operational time: 5 hours

Microphone – Storage and operating requirements4

Operating temperature: 32–104°F ( 0–40°C )
Battery charging temperature: 41–95°F ( 5–35°C )
Storage temperature: -4–140°F ( -20–60°C )
Humidity: 10–90% relative humidity, non-condensing

Receiver4

Line out: 3.5 mm audio output
Power: 5V USB Type-C
Wireless signal types: Digital
Working frequency: 2400–2483.5 MHz

Receiver – Storage and operating requirements4

Power requirements: 5VDC @ 200 mA, 1 W
Operating temperature: 32–104°F ( 0–40°C )
Storage temperature: -4–140°F ( -20–60°C )
Humidity: 10–90% relative humidity, non-condensing

Charging case6

Battery type: Rechargeable LiPo
Battery voltage: 3.7 V
Battery capacity: 300 mAh
Battery charger input: USB Type-C ×1
Charge time: 2 hours
Operating time: Provides up to 10 hours of operating time

Charging case – Storage and operating requirements5

Power requirements: 5VDC @ 400 mA, 2W
Operating temperature: 32–104°F ( 0–40°C )
Battery charging temperature: 41–95°F ( 5–35°C )
Storage temperature: -4–140°F ( -20–60°C )
Humidity: 10–90% relative humidity, non-condensing

Included cables and accessories6

USB Type-A to USB Type-C receiver power cable: 1
USB Type-C to USB Type-C microphone charging cable: 1
3.5 mm audio cable: 1
Mounting bracket: 1
Illustrated installation instructions: 1
Important information document: 1

Supported iQ system software1

iQ version: 4.7.2 or later

Supported SMART Board displays interactive displays1

_text: SMART Board MX (V5) SMART Board MX (V5) Plus SMART Board QX (V2) Pro SMART Board RX

Certification and compliance4

Regulatory models: Microphone: AEM-1, Receiver: AER-1, Charging case: AEC-1
US / Canada: FCC, ISED, TSCA, CONEG packaging, Prop 65
EU / EEA / EFTA / UK: CE, UKCA, LVD, EMCD, RED, REACH, RoHS, POP, Battery, WEEE, PPWR
Australia / New Zealand: RCM

Purchasing information – Order number1

SND-LK: SMART SoundLift voice amplification solution (receiver, 2 × microphone and 2 × charging case)

SMART Warranty1

_text: Terms and conditions and warranty upgrade options vary by region. Visit smarttech.com/warranty or contact your reseller for information.

Dimensions and weights1

_text: All dimensions ± 1/8" ( 0.3 cm ) . All weights ± 0.35 oz. ( 10 g ) ., The microphones and their charging cases ship with the receiver.

Dimensions and weights – Microphone2

Dimensions: 1 1/4" × 1 1/4" × 1.2" ( 3.2 × 3.2 × 1.3 cm )
Weight: 0.5 oz. ( 15 g )

Dimensions and weights – Charging case2

Dimensions: 2" × 2" × 1 1/4" ( 5.1 × 5.1 × 3.2 cm )
Weight: 1.2 oz. ( 35 g )

Dimensions and weights – Receiver4

Dimensions: 2 1/4" × 2 1/4" × 1" ( 5.8 × 5.8 × 2.6 cm )
Shipping dimensions: 10 3/8" × 5 5/8" × 1 3/4" ( 26.5 × 14.3 × 4.3 cm )
Weight: 1.4 oz. ( 40 g )
Shipping weight: 13.7 oz. ( 388 g )

Downloads

4 files from the manufacturer

PDF Datasheets SoundLift-EN-Brochure-Web.pdf 3.5 MB PDF Datasheets specs_soundlift.pdf 534 KB PDF Manuals & guides guide_soundlift.pdf 2.5 MB PDF Manuals & guides textlessguide-soundlift.pdf 2.2 MB

Questions about SMART SoundLift

Who is SMART SoundLift for in Qatar?

It is built for teachers who need to be heard across a classroom without raising their voice. A private school in Al Wakrah opening new classrooms, or an Arabic-curriculum school in Doha, can add it to a SMART Board so the teacher's voice reaches students at the back. Because it uses the board's built-in speakers, it suits rooms where a separate sound system would be impractical.

Do I need external speakers or an amplifier with SoundLift?

No. SoundLift sends the teacher's voice through the built-in speakers of a compatible SMART Board, so external amplifiers, mixers and speaker systems are not needed. The kit includes a receiver, two wearable microphones, two charging cases, cables and a mounting bracket. That keeps the setup to the board and the kit, which matters in a classroom with limited wall and desk space.

Which SMART Boards work with SoundLift?

SoundLift supports SMART Board MX (V5), MX (V5) Plus, QX (V2) Pro and RX displays running iQ 4.7.2 or later. Check the model and software version of each board before ordering, especially in a school where boards were installed at different times. Boards outside this list are not covered by the compatibility data, so ask the SmartRooms Qatar team to confirm before you request a quote.

How far can a teacher move from the receiver?

The wireless range is 30 m (98 ft) with clear line-of-sight between the microphone and the receiver. In a science lab in Lusail with fixed benches, a teacher can walk between stations and stay audible as long as the path is open. Walls or people standing between the microphone and receiver may reduce the range, so plan the room layout during a site survey.

Can lesson audio keep playing while the teacher speaks?

Yes. SoundLift plays the teacher's voice and SMART Board audio at the same time, so a video clip or audio track does not have to be paused when the teacher speaks. The receiver's audio latency is under 15 ms. In a bilingual lesson at an Arabic-curriculum school in Al Sadd, the teacher can introduce a clip in Arabic and continue in English without stopping the sound.

What is in the box?

The SND-LK kit contains the receiver, two microphones and two charging cases. It also includes a USB Type-A to USB Type-C cable for the receiver, a USB Type-C to USB Type-C cable for charging the microphones, a 3.5 mm audio cable, a mounting bracket, illustrated installation instructions and an important information document. The microphones and charging cases ship with the receiver.

How long do the microphones last between charges?

Each microphone provides about 5 hours of operating time, and its charging case provides up to 10 hours. Charging takes 2 hours, and batteries should charge between 5 and 35 degrees Celsius. For a teacher running several sessions in a day, the charging case lets you top up a microphone between lessons, so keep the case in a cool, accessible place near the teaching room.

Will it work in Qatar's summer heat and humidity?

The data rates operation from 0 to 40 degrees Celsius, with humidity from 10% to 90% non-condensing, and storage from -20 to 60 degrees Celsius. Summer temperatures in Qatar can exceed 45 degrees Celsius, so the receiver and charging cases should stay inside air-conditioned teaching spaces rather than hot storerooms or unventilated cupboards. Confirm your room conditions with the SmartRooms Qatar team before installation.

Which power connections does the receiver need?

The receiver runs on 5V USB Type-C and draws 5VDC at 200 mA (1 W). The charging case takes USB Type-C input and draws 5VDC at 400 mA (2 W). The kit includes a USB Type-A to USB Type-C cable for the receiver, but the source data does not list a power adapter. Confirm the power supply for the receiver with the SmartRooms Qatar team when you request your quote.

Does it help AI transcription and translation tools?

The manufacturer states that clearer voice input helps AI transcription and translation tools produce more accurate output. Results still depend on the tool, the language and the room's acoustics. For a school that records bilingual lessons for students who need captions, test the output with a real lesson before relying on it for assessment or accessibility support.

Can our own staff install SoundLift?

The kit includes a mounting bracket and illustrated installation instructions, so a technically confident team can fit the receiver. SmartRooms Qatar also offers professional installation and free site surveys. A survey is useful when the SMART Board is mounted high on a wall or when the receiver position needs to be planned around the panel and the teacher's usual path through the room.

How do we order SoundLift for several classrooms through an LPO or tender?

Send the SmartRooms Qatar team a list of rooms, the SMART Board model in each, and the number of kits required. We supply against a purchase order (LPO) or a government tender, including Monaqasat, and accept payment by bank transfer, cheque or purchase order. Delivery covers all eight municipalities of Qatar, and the product is covered by the manufacturer's warranty. Request a quote and we usually respond within one working day.