VPCF5-S55-G1-2A

What this OPS module does for a ViewBoard display

The ViewSonic VPCF5-S55-G1-2A is a slot-in PC built to the OPS standard, an 80-pin module format that sits inside compatible ViewBoard interactive and presentation displays. Once fitted, the display can act as a computing point in its own right, rather than only a screen for a laptop connected at the front of the room. The source data lists UEFI Shell as the operating system, so confirm your software requirements with the SmartRooms Qatar team before ordering.

Processing, memory and storage for daily use

The module is specified with an Intel 12th Gen Core i5 processor or a later generation, 16GB of DDR4 memory and a 512GB M.2 SSD on a PCIe interface. Its graphics come from Intel Iris Xe integrated graphics, and as an integrated GPU its performance depends on the system-memory configuration. The manufacturer recommends a dual-channel memory setup for optimal results and notes that some graphics features may be unavailable with single-channel memory. Mention your graphics needs when you request a quote so the configuration can be matched to them.

Video outputs, ports and wireless connectivity

Signals between the module and the display travel over the OPS connector, which is specified for HDMI 2.0 up to 4K at 60Hz, DisplayPort up to 5K at 60Hz, one USB 3.0 port with two USB 2.0 ports, and a DC 12 to 19V supply. The module also has its own HDMI output rated up to 3840 x 2160 at 30Hz. Its ports and network options include:

• Two USB 3.1 Type-A ports and two USB 2.0 Type-A ports
• One USB 3.1 Gen2 Type-C port for data only
• One RJ45 Gigabit LAN port (10/100/1000M)
• Intel Wi-Fi 6 AX101 (802.11ax) with Bluetooth 5.2 and two antennas
• A combined microphone-in and line-out connector

Security, thermal control and power draw

An embedded TPM 2.0 chip is included for security functions. The manufacturer describes improved system stability, security and thermal control, but the data does not give noise levels, so ask for them if quiet operation matters in a lecture hall. The module is rated DC 19V at 4.74A with a maximum consumption of 90 W. The UEFI Shell environment allows scripting, file manipulation and retrieval of system information, which IT staff can use when checking several units.

Where it fits in Qatar

In a private school in Al Wakrah fitting out new classrooms, the module lets each ViewBoard display run lessons without a separate computer on every teacher's desk. In a boardroom in West Bay, the same setup supports hybrid meetings with teams abroad, with both wired and wireless network options. At a university training centre in Education City, IT staff can standardise one configuration across several rooms.

Qatar summers push outdoor temperatures above 45°C, so the module must stay within its rated 0 to 40°C operating range and 20 to 80% relative humidity, non-condensing. Install displays in air-conditioned rooms, away from sun-facing windows and dusty entrances. If a room will run hot, confirm the environment with the SmartRooms Qatar team before you settle on a layout.

What to plan before ordering

• Confirm your ViewBoard display has a compatible OPS slot with an 80-pin connector.
• Check the footprint: 200 x 119 x 30 mm, net weight 0.7 kg.
• Plan network points for the RJ45 port and the Wi-Fi antennas included in the box.
• Confirm that your software runs under the listed UEFI Shell environment.

SmartRooms Qatar offers free site surveys, professional installation and delivery to all eight municipalities of Qatar. Schools and government buyers can order against an LPO or join a tender for several units. Request a quote and the team will return a quotation, usually within one working day.