Biamp Tesira AMP-A460H · Price in Qatar

Name: Biamp Tesira AMP-A460H 4-Channel 60W Conferencing Amplifier
Brand: Biamp
SKU: biamp-tesira-amp-a460h
Availability: InStock

Overview

The Biamp Tesira AMP-A460H is a half-rack, four-channel amplifier rated at 60 watts per channel, with channels that can be bridged to 120 watts for 70V or 100V constant voltage systems. Its Class D design uses convection cooling instead of fans, so it stays quiet in meeting rooms. It suits boardrooms, training rooms and classrooms across Qatar that need steady sound reinforcement. Request a quote from SmartRooms Qatar.

What the Tesira AMP-A460H does in a conference room

The Biamp Tesira AMP-A460H is a half-rack amplifier with four independent channels, each rated at 60 watts. It is built for conferencing and office sound reinforcement, where loudspeakers need steady power without the hum of a fan-cooled box. Its Class D design relies on convection cooling, so there are no fans to maintain or to hear during a meeting.

Channels, bridging and key controls

In standard mode each channel drives its own load at up to 60 watts into 4 or 8 ohms. Bridging two channels raises the output to 120 watts and makes 70V or 100V constant voltage operation possible, which suits speakers distributed across a ceiling or wall line. Three manual switches on the unit select bridging, constant voltage and an 80Hz high-pass filter, and rear panel indicators show the filter state. LED indicators report the status of each output channel.

Output: 60W per channel single driven, 120W bridged
Frequency response: plus or minus 1 dB, 20Hz to 20kHz
Distortion: THD+N below 0.3% at rated power
Dynamic range: 100 dB at 8 ohms, unweighted
Power input: 100-240VAC, 50/60Hz

Where it fits in Qatar

In a corporate boardroom in West Bay or Lusail, one unit can power the room's loudspeakers, with bridged mode available if the design calls for a 70V ceiling line. Private schools in Al Wakrah or Al Rayyan fitting out new classrooms can run several units from a single communications cabinet, while training rooms at Education City or meeting rooms in a hotel in The Pearl or Msheireb benefit from a compact amplifier that needs no fan noise and fits a standard rack.

Planning the installation

Before ordering, confirm the loudspeaker impedance (4 or 8 ohms, or a 70V/100V line), the number of zones and whether bridging is needed. The unit is rated for indoor use, with an ambient operating range of 0 to 40 C (32 to 104 F), humidity of 0 to 95% non-condensing, and altitude up to 2,000 m. Summer temperatures in Doha can exceed 45 C outdoors, so install the rack in an air-conditioned room and leave space around the case, because convection cooling depends on airflow. Each unit ships with a rack mount kit for one unit or two side by side. Dimensions are 44 mm high, 221 mm wide and 266 mm deep, and the unit weighs 1.91 kg.

The AMP-A460H carries UL and C-UL listings for the USA and Canada, CE, RoHS, FCC Part 15B, RCM, EAC, CCC and KCC marks, and is TAA compliant. It comes with a 5-year manufacturer warranty. SmartRooms Qatar supplies the amplifier, delivers it to all eight municipalities of Qatar and can arrange professional installation, with a free site survey before wall or rack mounting. Request a quote for your rooms, and our team will usually reply within one working day.

Highlights

Four channels at 60W each, bridgeable to 120W
Supports 70V and 100V constant voltage when bridged
Class D design with convection cooling and no fans
Half-rack, 44 mm high, with rack mount kit included
Power input 100-240VAC, 50/60Hz
5-year manufacturer warranty

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

22 specifications · Source: manufacturer · checked Oct 2026

GENERAL5

Height: 1.7 inches (44 mm)
Width: 8.7 inches (221 mm)
Depth: 10.5 inches (266 mm)
Weight: 4.2 lbs (1.91 kg)
Included Accessories: Rack mount kit

POWER2

Power: 100-240VAC, 50/60Hz
Cooling: Convection

AMPLIFIER2

Channels: 4 Channels
Amplifier: Class D Mode selection (standard/bridged) Constant Voltage selection (bridged mode only)

CERTIFIED SOLUTIONS2

TAA Compliant: TAA Compliant
Certified Solutions: TAA Compliant

CONTROLS & INDICATORS1

Rear Panel Indicator(s): Rear Panel Indicators: 80Hz HPF (on/off)

COMPLIANCE1

Certifications: UL and C-UL listed (USA and Canada) FCC Part 15B (USA) CE Marked (Europe) RCM (Australia) EAC (Eurasian Customs Union) RoHS Directive (Europe) CCC (China) KCC (Korea)

ENVIRONMENTAL4

Operating Environment: Indoor
Ambient Operating Temperature Range: 32-104° F (0–40° C)
Humidity: 0–95%, non-condensing
Altitude: 0-6,600 feet (0–2000 Meters) MSL

LOUDSPEAKER1

Sensitivity: Input Sensitivity (at rated power): 8Ω, 70V: 0 dBu 100V: +1.6 dBu

AUDIO4

Maximum Output: Maximum Rated Output: Single Channel Driven, 4Ω, 8Ω: 60W Bridged, 4Ω, 8Ω: 120W Bridged, 70V/100V: 120W
THD+N: (20Hz - 20kHz, at rated power):
Frequency Response: (20Hz - 20kHz): ± 1 dB
Dynamic Range: (20Hz - 20kHz, 8Ω, unweighted): 100 dB

Downloads

6 files from the manufacturer

PDF Datasheets biamp_data_sheet_amp-a460h_sep22.pdf 398 KB PDF Manuals & guides biamp_system_design_guide_lecture-hall_feb22.pdf 769 KB PDF Manuals & guides tesira_amp-a460h_operation_manual_may19.pdf 387 KB EXE Manuals & guides · Opens on manufacturer site Tesira_Setup_SW_13368.exe PDF Brochures Biamp_Tesira_Product_Catalog_Aug25.pdf 35.2 MB RFA Drawings & CAD · Opens on manufacturer site biamp_revit_tesira_amp-a460h_feb23_4276.rfa

Questions about Tesira AMP-A460H

What is the Biamp Tesira AMP-A460H used for?

It is a four-channel amplifier for conferencing and office sound reinforcement, delivering 60 watts per channel into 4 or 8 ohm loudspeakers. It is designed to sit alongside Tesira-based audio in meeting rooms, training rooms and classrooms. A typical case in Qatar is a boardroom in West Bay or Lusail, where wall or ceiling speakers need clear sound without a noisy amplifier in the room. Request a quote to confirm the channel count for your space.

Does it run on Qatar's 240 V, 50 Hz power supply?

Yes. Its power input is rated at 100-240VAC, 50/60Hz, which covers Qatar's 240 V, 50 Hz mains supply. The unit uses convection cooling, so there is no fan to maintain, but it needs clear space around the case so air can move. Confirm the cable and socket arrangement for your rack location with the SmartRooms Qatar team when you request a quote.

Can it be installed where summer temperatures exceed 45 C?

Not in an unconditioned space. The AMP-A460H is rated for indoor use, with an ambient operating range of 0 to 40 C (32 to 104 F) and humidity of 0 to 95%, non-condensing. Summer temperatures in Doha regularly pass 45 C outdoors, so mount the rack in an air-conditioned comms room, away from windows and hot plant areas. Confirm your room conditions before ordering.

What is the difference between standard and bridged mode?

In standard mode each channel drives its own load at up to 60 watts. Bridging two channels raises the output to 120 watts and allows 70V or 100V constant voltage operation for distributed speaker lines. Three manual switches on the unit select bridging, constant voltage and an 80Hz high-pass filter, and the rear panel shows the filter state. Tell us your speaker layout and we will advise which mode fits.

Is extra software needed to set it up?

No. The AMP-A460H needs no additional software, and its main functions are set with manual switches on the unit, so the amplifier itself adds no software to your project. LED indicators show the status of each output channel, which helps during testing and commissioning. Our team can plan commissioning as part of the installation quotation.

How is it mounted, and how big is it?

Every unit ships with a rack mount kit for mounting one unit, or two side by side. It measures 44 mm high, 221 mm wide and 266 mm deep, and weighs 1.91 kg (4.2 lb). Plan a rack shelf with airflow around the case, and check that the cable runs reach the speaker zones. A free site survey can confirm the space before you order.

Is it suitable for classrooms and training rooms in Education City?

Yes, for the sound reinforcement role it is built for, including office and classroom use. A training centre or university lecture room in Education City, or a private school fitting out new classrooms, can use one amplifier per group of speaker zones, with all units housed in one communications cabinet. Schools ordering several units can raise a purchase order (LPO) with the quotation.

Is it designed to pair with Tesira FORTÉ systems?

Biamp positions the AMP-A460H as a companion for conference rooms equipped with Tesira FORTÉ, and it also suits office or classroom sound systems that need extra reinforcement. Confirm the signal connections and DSP setup against your existing Tesira configuration before ordering, so the amplifier matches the rest of the system.

What certifications and warranty does it carry?

Listed certifications include UL and C-UL for the USA and Canada, CE, RoHS, FCC Part 15B, RCM, EAC, CCC and KCC. The unit is also TAA compliant. The manufacturer provides a 5-year warranty, and products supplied by SmartRooms Qatar are covered by that manufacturer warranty. Ask our team for the certificate list if your consultant needs it for the quotation.

What does TAA compliance mean for a Qatar buyer?

TAA refers to the US Trade Agreements Act, and a TAA compliant product can be included in bids for US federal government sales. Qatar tenders usually do not ask for it, but some international specifications do, so check your tender document. If your project requires TAA, state it in your quotation request so the right unit is quoted.

What should I plan before installing it in a boardroom?

Confirm the loudspeaker impedance (4 or 8 ohms, or a 70V/100V line), the number of zones, and whether bridging is needed. Check the room's cooling, the rack location and the cable runs. A boardroom in a West Bay office tower might run speakers in standard mode, or bridge channels for a 70V ceiling line. SmartRooms Qatar offers a free site survey before wall or rack mounting.

How many units does a multi-room fit-out in Lusail need?

Start by counting loudspeaker zones and their impedance. Each unit has four channels, so a small meeting room with two zones may need only one unit, while a hotel conference centre or a multi-room school block in Lusail will plan several units in one rack. SmartRooms Qatar delivers to all eight municipalities and can quote the full set in one proposal. Request a quote with your room list.