Hikvision DS-C66S-PWR C66S 550 W Power Unit

Name: Hikvision DS-C66S-PWR C66S 550 W Power Unit
Brand: Hikvision
SKU: hikvision-ds-c66s-pwr
Availability: InStock

Overview

The Hikvision DS-C66S-PWR is a 550 W power unit for the C66S series video wall controller chassis. It uses a CRPS redundant power module designed for a 12-slot chassis and accepts 100 VAC to 240 VAC at 50/60 Hz, which covers Qatar's 240 V mains. It suits control rooms, command centres and display walls in Doha and across Qatar that need a dependable power source for their controller. Request a quote for supply and installation.

What the DS-C66S-PWR powers in a video wall controller

The Hikvision DS-C66S-PWR is a power unit for the C66S series of video wall controllers. It converts mains electricity into a 550 W output that feeds the controller chassis, so the modules that drive your panels receive a stable supply. The model is listed as a current product, so it can be quoted today for new video wall builds and for expanding existing C66S installations.

Electrical facts to check before ordering

The unit accepts a working voltage from 100 VAC to 240 VAC at 50/60 Hz. That range covers Qatar's standard 240 V, 50 Hz supply. Its maximum working current is 5.5 A, and overcurrent protection is supported. The source data lists a single power interface on the unit.

Output power: 550 W
Input: 100 VAC to 240 VAC, 50/60 Hz
Maximum working current: 5.5 A
Protection: overcurrent protection supported

Why a redundant power module matters on a video wall

A video wall controller drives every panel in the wall, so a power fault can blank the whole display. The CRPS format is a redundant power standard. In a chassis fitted with redundant modules, a second supply can carry the load if the first one fails. Confirm with your quotation whether your build uses one unit or a redundant pair, because the source data does not describe pairing in detail.

Where it fits in Qatar

A ministry operations room in Doha that runs a multi-screen situation display needs its controller powered through long shifts, and a redundant CRPS design suits that always-on use. A university media or research centre in Education City may run a wall for lectures, lab monitoring and events, and a 12-slot chassis with 550 W output can handle a larger wall fed by several inputs. Industrial control rooms in Mesaieed or Ras Laffan that show process data also depend on steady power, although the operating environment should be confirmed before use because the source data gives electrical specifications only.

What to plan for during installation

Check the 5.5 A maximum working current against the circuit feeding the chassis, and confirm the UPS capacity serving the video wall. Plan rack space and cable routing for the unit. Because the source data does not list a power cord or plug type, confirm the connector with your quotation, especially if your electrical contractor is fitting BS 1363 (Type G) outlets. SmartRooms Qatar offers a free site survey to check rack space, cabling and power before installation, and professional installation can be arranged with the quotation.

Send your chassis configuration, rack layout and quantity to request a quote from the SmartRooms Qatar team, and we will confirm the details with you.

Highlights

550 W rated output power
Input range 100 VAC to 240 VAC, 50/60 Hz
Maximum working current of 5.5 A
CRPS redundant power module for 12-slot chassis
Overcurrent protection supported
Part of the C66S series video wall controller range

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

6 specifications · Source: manufacturer · checked Oct 2026

Power6

Power Interface: 1
Working Voltage: 100 VAC to 240 VAC, 50/60 Hz
Working Frequency: 50 Hz to 60 Hz
Working Current: 5.5A MAX
Output Power: 550 W
Overcurrent Protection: Supported

Downloads

5 files from the manufacturer

PDF Datasheets · Opens on manufacturer site DS-C66S-PWR_Datasheet_20260626.pdf PDF Manuals & guides Quick Start Guide_8e655fcc.pdf 5.2 MB PDF Manuals & guides User Manual_9465d09a.pdf 6.2 MB PDF Brochures Brochure_Commercial-Display-Solutions-for-Command-Centers_20240628.pdf 13.3 MB 1_26 Software & firmware · Opens on manufacturer site Firmware_V1.1.1_260902

Questions about DS-C66S-PWR

What is the Hikvision DS-C66S-PWR?

The DS-C66S-PWR is a power unit from the C66S series of Hikvision video wall controllers. It supplies 550 W of output power to the controller chassis and is built around a CRPS redundant power module for a 12-slot chassis. It suits control rooms and display walls where the controller must stay powered, and it is a current model you can request a quote for today.

How much power does the C66S Power Unit deliver?

The unit has a rated output of 550 W and a maximum working current of 5.5 A. Its input range is 100 VAC to 240 VAC at 50/60 Hz, and overcurrent protection is supported. Share your full chassis configuration with the SmartRooms Qatar team so the power budget can be checked against the controller modules you plan to install.

Will it run on Qatar's 240 V, 50 Hz mains supply?

Yes. The input range of 100 VAC to 240 VAC at 50/60 Hz covers Qatar's standard 240 V, 50 Hz supply. The source data does not list a power cord or plug type, so confirm the connector and cable with your quotation, particularly if your electrical contractor is fitting BS 1363 (Type G) outlets.

What does the redundant CRPS design mean for a video wall?

CRPS is a redundant power standard, so a chassis fitted with redundant modules can keep running if one supply fails. For a video wall, that means a single power fault is less likely to blank every panel the controller drives. Confirm with your quotation whether your build uses one unit or a redundant pair, because the source data does not describe pairing in detail.

Which chassis is the DS-C66S-PWR designed for?

The source data links the unit to the C66S series and to a 12-slot chassis. Check your chassis model and slot layout against the C66S series before ordering. SmartRooms Qatar can confirm the fit from your configuration during the quotation stage, and a free site survey can check rack space and cabling before installation.

Is it compatible with other Hikvision video wall controllers?

The data lists only the C66S series as its series and subseries, so do not assume it fits other controller families. If you run an older or different Hikvision controller, send the model code to the SmartRooms Qatar team before ordering. Confirming compatibility at the quotation stage helps avoid delays on a tender or purchase order.

Is it suitable for a ministry operations room in Doha?

A ministry operations room in Doha running a multi-screen situation display depends on its controller being powered reliably through long shifts. The redundant CRPS design and the 550 W output suit that kind of always-on environment. Pair the unit with a review of the room's UPS and electrical circuits, then request a quote with your chassis layout.

How would it be used at a university in Education City?

A media or research centre at a university in Education City might run a video wall for lectures, lab monitoring or events. A 12-slot chassis with 550 W output suits a larger wall fed by several inputs. Ask for the power unit within a full quotation that also covers the controller, panels and cabling, so the whole system is specified together.

Can it be used in an industrial control room in Mesaieed or Ras Laffan?

Industrial control rooms in Mesaieed or Ras Laffan often need display walls showing process data, and they depend on steady power. The source data gives electrical specifications only and no environmental ratings, so confirm the operating environment before use. SmartRooms Qatar can review the control room layout during a free site survey.

What should I check on power planning before ordering?

Check the maximum working current of 5.5 A against the circuit feeding the chassis, and confirm the UPS capacity serving the video wall. Make sure the rack has space for the unit and that cable routing is clear. A free site survey from SmartRooms Qatar can confirm these details before the quotation is finalised.

Can SmartRooms Qatar supply it on an LPO or for a government tender?

Yes. SmartRooms Qatar supplies against purchase orders (LPOs) and government tenders, including Monaqasat, and accepts payment by bank transfer, cheque or purchase order. Quotations are usually issued within one working day. Products are covered by the manufacturer's warranty, and you can send your quantity and chassis configuration to request a quote.

Does SmartRooms Qatar install the power unit?

SmartRooms Qatar provides professional installation for video wall projects in Qatar. For a 550 W unit inside a 12-slot chassis, installation is planned after a site survey, which confirms rack position, circuit capacity and the power connector. The installation scope is then stated in the quotation, so you know exactly what is included before you approve the order.