Thursday, 22 October 2026 · 11 Jumada I 1448 AH Sun – Thu · 9:00 – 18:00
+971 56 914 9477 العربية
WhatsApp

TesiraFORTÉ CI

Biamp TesiraFORTÉ CI 12-Input Conferencing DSP

Pickup range
(in presence of signal): 22Hz…
Platforms
TAA Compliant
WhatsApp
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
PDFDownload datasheet (biamp_data_sheet_tesiraforte_ci_oct20.pdf)
Overview

A conferencing DSP with 12 AEC-enabled inputs, the Biamp TesiraFORTÉ CI pairs those microphone and line inputs with 8 outputs for loudspeakers, amplifiers and recording feeds. It also provides up to 8 channels of configurable USB audio and Gigabit Ethernet control. It suits boardrooms and meeting rooms in Doha, West Bay and Lusail where remote participants need clear, echo-free speech. Request a quote from SmartRooms Qatar.

What the TesiraFORTÉ CI does in a conference room

The Biamp TesiraFORTÉ CI is a conferencing digital signal processor with a fixed set of connections: 12 microphone/line inputs and 8 mic/line outputs. Acoustic Echo Cancellation runs on all 12 inputs, so the processor removes echo and room reflections before audio reaches remote participants. In rooms with hard walls, glass and ceiling microphones, that is the difference between speech people can follow and speech they have to repeat.

Configuration is done in Tesira software, where you set routing, mixing, equalisation, filtering, dynamics and delay for each channel. The result is a tuned system rather than a box that passes audio straight through.

Facts that matter for planning

  • Audio: 24-bit A/D and D/A converters, 48kHz sampling and a 20Hz to 20kHz frequency response.
  • USB: up to 8 configurable channels at 16- or 24-bit, 48kHz, for connecting a conferencing PC or codec.
  • Input gain: 0 to 66dB in 6dB steps, with a maximum input level of +24dBu.
  • Phantom power: +48VDC at 7mA per input for microphones that need it.
  • Control: Gigabit Ethernet, RS-232 and GPIO for control processors and room automation.
  • Display: two-line OLED with capacitive-touch navigation for status and diagnostics during commissioning.

Where it fits in Qatar

A boardroom in West Bay or Lusail where a team in Doha joins a call with colleagues in Europe is a typical case. The 12 AEC-enabled inputs cover a table of microphones and any ceiling array, while the USB channels feed the conferencing PC. In a government ministry meeting room, the TAA compliance and the CE, UL and RoHS listings are the points a procurement team checks against the specification.

A school or training centre in Education City or Al Rayyan running a hybrid lesson can route the 8 outputs to loudspeakers, a recording feed and an overflow room, with the processor kept in a secure equipment cabinet.

What to plan before ordering

The ambient operating range is 0 to 40°C, with humidity from 0 to 98% non-condensing and altitude up to 2,000 metres. Summer temperatures in Qatar often pass 45°C, so install the unit in an air-conditioned room or a cabinet that stays within that range, not in a hot equipment closet or outdoors. The unit draws under 35W on 100-240VAC 50/60Hz, which covers the 240V 50Hz supply used in Qatar.

It measures 19.0 inches wide, 10.5 inches deep and 1.75 inches (44 mm) high, and weighs 8 lbs (3.63 kg). Check rack space and depth, and plan cable routing for 12 inputs, 8 outputs and the network connection before installation. SmartRooms Qatar offers free site surveys to confirm room layout and rack position before you order.

Warranty and ordering

The TesiraFORTÉ CI is backed by a 5-year manufacturer warranty. SmartRooms Qatar supplies it with professional installation, with delivery to all 8 municipalities of Qatar, and can work on a purchase order (LPO) for multi-room projects. Request a quote and we will usually reply within one working day with the scope of supply and installation for your room.

Highlights

  • 12 microphone/line inputs, each with Acoustic Echo Cancellation
  • 8 mic/line outputs for loudspeakers, amplifiers and recording
  • Up to 8 channels of configurable USB audio at 48kHz
  • Gigabit Ethernet, RS-232 and GPIO for system integration
  • Internal universal power supply, 100-240VAC 50/60Hz
  • Ambient operating range 0 to 40°C; 5-year manufacturer warranty

Room fit

Tell us the room size and platform (Teams, Zoom or BYOD) and we confirm the right combination with your quotation.

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

25 specifications · Source: manufacturer · checked Oct 2026
GENERAL4
Height
1.75 inches (44 mm)
Width
19.0 inches (483 mm)
Depth
10.5 inches (267 mm)
Weight
8 lbs (3.63 kg)
POWER2
Power Consumption
100-240VAC 50/60Hz: < 35W
Phantom Power
+48VDC (7mA/input)
CERTIFIED SOLUTIONS2
TAA Compliant
TAA Compliant
Certified Solutions
TAA Compliant
COMPLIANCE1
Certifications
FCC Part 15B (USA) CE marked (Europe) UL und C-UL listed (USA and Canada) RCM (Australia) RoHS Directive (Europe)
ENVIRONMENTAL3
Ambient Operating Temperature Range
32-104° F (0–40° C)
Humidity
0–98%, non-condensing
Altitude
0-6,600 feet (0–2000 Meters) MSL
AUDIO13
Audio
Fixed I/O DSP with 12 analog inputs and 8 analog outputs and includes Acoustic Echo Cancellation (AEC) technology on all 12 inputs. It also includes up to 8 channels of configurable USB audio.
Input Type
USB: Bit Depth: 16- or 24-bit Number of Channels: up to 8 Sample Rate: 48kHz
Impedance
(balanced): 8kΩ
Input Gain Range
(6dB steps): 0-66dB
Maximum Input
+24dBu
Output Impedance
(balanced): 207Ω
Maximum Output
(selectable): +24dBu, +18dBu, +12dBu, +6dBu, 0dBu, -31dBu
Frequency Response
20Hz to 20kHz, +4dBu output: +0.25 dB/-0.5 dB
EIN
(no weighting, 22Hz to 22kHz): < -125dBu
Dynamic Range
(in presence of signal): 22Hz to 22kHz, 0dB gain: > 108dB
Crosstalk
channel to channel, 1 kHz: 0dB gain, +4dBu input: < -85dB 54dB gain, -50dBu input: < -75dB
Sampling Rate
48kHz
A/D Converters
A/D - D/A Converters: 24-bit

Downloads

5 files from the manufacturer

Questions about TesiraFORTÉ CI

What is the TesiraFORTÉ CI used for, and who is it for?
The TesiraFORTÉ CI is a conferencing DSP for rooms where remote participants must hear clean speech. Its 12 microphone/line inputs and 8 outputs let one fixed unit handle a conference table, ceiling microphones, loudspeakers and a recording feed. It suits IT managers and AV integrators specifying boardrooms, lecture halls with hybrid teaching, and meeting rooms in Doha's business districts.
How does Acoustic Echo Cancellation help remote participants?
Acoustic Echo Cancellation (AEC) is enabled on all 12 inputs. It removes echo and room reflections before audio leaves the room, so remote callers hear the people in the room rather than their own voice returning. This matters most in glass-walled or hard-surfaced rooms common in new offices in Lusail and West Bay. All routing, mixing and equalisation is set in Tesira software.
Can it be installed in a hot server room or unconditioned cabinet in Qatar?
The ambient operating range is 0 to 40°C, with 0 to 98% humidity non-condensing and altitude up to 2,000 metres. Summer temperatures in Qatar often pass 45°C, so mount it inside an air-conditioned room or a cabinet kept within that range, not in a hot equipment closet or outdoors. If you are unsure about the site, our team can confirm conditions during a free site survey.
Does it run on Qatar's 240V, 50Hz mains supply?
Yes. The internal universal power supply is rated 100-240VAC at 50/60Hz and draws under 35W, so the 240V 50Hz supply used in Qatar falls within its range. Confirm the socket position at the rack before installation, since BS 1363 (Type G) sockets are standard in Qatar and a nearby outlet simplifies the power connection.
How many microphones and sources can it take?
The unit has 12 analog inputs, each with AEC. Count every microphone and line-level source in the room, including ceiling or table arrays and lectern mics, and confirm the total fits within 12 before ordering. Input gain runs from 0 to 66dB in 6dB steps with a maximum input level of +24dBu, so gain can be matched to each source.
Does it supply phantom power for microphones?
Yes. Each input provides +48VDC phantom power at 7mA per input. Check the current draw of any microphone that needs phantom power before connecting it, and confirm it is designed to receive phantom power from a DSP input. Balanced input impedance is 8kΩ, which is useful when matching the microphones you plan to use.
How does it connect to a conferencing PC or codec over USB?
It provides up to 8 channels of configurable USB audio at 16- or 24-bit, with a 48kHz sample rate. These channels carry room audio between the processor and a conferencing computer or room system. Before committing, confirm that your conferencing platform accepts 48kHz audio, and set channel assignments and levels in Tesira software.
Can it be controlled by a touch panel or automation system?
Yes, through Gigabit Ethernet, RS-232 and GPIO. Ethernet handles configuration and control across the network, while RS-232 and GPIO connect to control processors, automation platforms and third-party room devices. Confirm the integration details with your control programmer before purchase so the required connections match your existing equipment.
What size and weight should I plan for?
The chassis measures 19.0 inches (483 mm) wide, 10.5 inches (267 mm) deep and 1.75 inches (44 mm) high, and weighs 8 lbs (3.63 kg). The 19-inch width matches a standard equipment rack, but check cabinet depth because the body needs 10.5 inches plus clearance for cables behind it. Plan cable routing in the rack before the unit arrives on site.
Is it suitable for government and public-sector tenders in Qatar?
The TesiraFORTÉ CI is listed as TAA compliant and carries FCC Part 15B, CE, UL and C-UL, RCM and RoHS certifications. These details help when a tender asks for documented compliance. Check the exact requirements in your tender document, and ask SmartRooms Qatar to confirm the scope against it during the quotation.
Can we order several units on one LPO for a multi-room project?
Yes. SmartRooms Qatar supplies on purchase orders (LPOs) and government tenders, including Monaqasat, and accepts payment by bank transfer, cheque or purchase order. Send the number of rooms and their locations, and we usually return a quotation within one working day covering supply and professional installation. Free site surveys are available before you place the order.

Similar models

Biamp Tesira AMP-450BP Biamp Tesira AMP-450BP 4-Channel PoE+ Conferencing Amplifier
(20Hz-20kHz BW): > 90dB TAA Compliant
Biamp Tesira AMP-450P Biamp Tesira AMP-450P 4-Channel PoE+ Conferencing Amplifier
(20Hz-20kHz BW): > 90dB TAA Compliant
Biamp Tesira AMP-A460H Biamp Tesira AMP-A460H 4-Channel 60W Conferencing Amplifier
(20Hz - 20kHz TAA Compliant
Biamp Tesira TB-1 Biamp Tesira TB-1 Ceiling Tile Bridge for Plenum Boxes
TAA Compliant
Biamp TesiraCONNECT PEX Biamp TesiraCONNECT PEX 15m (50-foot) Power Extension Cable
Audio & DSP
Email Call