Hikvision DS-C66S-04SDI/4K · Price in Qatar

Name: Hikvision DS-C66S-04SDI/4K 4-Channel 12G-SDI Input Board
Brand: Hikvision
SKU: hikvision-ds-c66s-04sdi-4k
Availability: InStock

Overview

The Hikvision DS-C66S-04SDI/4K is a four-channel 12G-SDI input board for C66S Series video wall controllers. It takes four sources at up to 4K, each with a loop-through output, and accepts 25 Hz to 60 Hz input. HDR10 and HLG are supported, and 6G, 3G and HD SDI signals are accepted. Its four audio inputs suit control rooms and command centres in Qatar fed from existing SDI cameras or players. Request a quote.

What the DS-C66S-04SDI/4K adds to a C66S controller

The Hikvision DS-C66S-04SDI/4K is an input board for the C66S Series video wall controller, not a standalone unit. It fits an input slot in the chassis and brings four 12G-SDI sources into the wall's processing. Every input has a matching loop-through output, so the same signal can also reach a monitor, recorder or other device without a separate splitter.

Input range from 12G down to HD

The board accepts 12G-SDI under ST-2082 and steps down through 6G (ST-2081), 3G (ST-424) and HD (ST-292) signals. It also handles 3G Level A and Level B in DS mode. Inputs from 25 Hz to 60 Hz are accepted, with a maximum input resolution of 4K. That flexibility matters on mixed sites, where a recent 4K camera and an older HD media player may need to feed the same wall.

HDR and audio on every input

HDR10 is supported to SMPTE ST 2084 and SMPTE ST 2086, and HLG is supported as well, so high dynamic range sources from cameras or players can be carried to the wall. Audio arrives as in-band signals: four audio inputs, dual-channel audio and sampling rates of 32 kHz, 44.1 kHz and 48 kHz. Confirm that your sources use one of these sampling rates before you order.

Where it fits in Qatar

Typical deployments include:

A ministry operations room in Doha where existing HD feeds from older players and new 4K cameras must share one video wall without replacing every source.
A stadium control room in Lusail that needs several live feeds and program audio routed to the display during events.
A hospital command centre in West Bay that shows monitoring and camera sources, where 4K and HDR inputs can be carried to the wall.

What to plan before ordering

Start with the chassis. The board occupies an input slot, so count the free input slots in your C66S Series controller and list the number of SDI sources you need. Next, record the format, resolution and frame rate of each source to confirm it falls within 25 Hz to 60 Hz and the standards listed above. The data for this board does not state an operating temperature range, so confirm the room conditions with the SmartRooms Qatar team before installation, particularly in any space that is not air-conditioned. Plan the coaxial cable runs for each 12G-SDI input and confirm them during a free site survey.

Request a quote

Send the controller model, the number of inputs you need and a list of your sources. SmartRooms Qatar will prepare a quotation, usually within one working day. Government authorities and schools can order on an LPO or through a tender, and payment is by bank transfer, cheque or purchase order. Request a quote to confirm the board suits your wall.

Highlights

Four 12G-SDI inputs, each with a loop-through output
Input resolution up to 4K at 25 Hz to 60 Hz
HDR10 and HLG support on the input side
Accepts 6G, 3G and HD SDI as well as 12G-SDI
Four audio inputs, dual-channel, 32/44.1/48 kHz sampling
Occupies an input slot in the C66S Series controller

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

10 specifications · Source: manufacturer · checked Oct 2026

Processing Performance1

Input Frame Rate: 25 Hz to 60 Hz

Chassis1

Occupied Slot: Input slot

General1

HDR: Supports HDR10, compliant with SMPTE ST 2084/SMPTE ST 2086 standards. Supports HLG.

Audio1

Audio Channel: Dual channel

Audio Input2

Audio Input Interface: 4 × in-band audio
Audio Sampling Rate: 32/44.1/48 kHz

Video Input4

Video Input Interface Type: 12G-SDI
Video Input Interfaces: 4 (4 input +4 loop-through output)
Max. Video Input Resolution: 4K
Video Input Resolution: Supports ST-2082 (12G), ST-2081 (6G), ST-424 (3G), and ST-292 (HD) standard video input. Supports 3G-Level A/Level B (DS mode).

Downloads

6 files from the manufacturer

PDF Datasheets · Opens on manufacturer site DS-C66S-04SDI_4K_Datasheet_20260625.pdf PDF Manuals & guides Quick Start Guide_8e655fcc.pdf 5.2 MB PDF Manuals & guides User Manual_9465d09a.pdf 6.2 MB PDF Brochures Brochure_Commercial-Display-Solutions-for-Command-Centers_20240628.pdf 13.3 MB PNG Drawings & CAD DS-C66S-04SDI-4K_02.png 2.4 MB 1_26 Software & firmware · Opens on manufacturer site Firmware_V1.1.1_260902

Questions about DS-C66S-04SDI/4K

What is the Hikvision DS-C66S-04SDI/4K used for?

It is a four-channel SDI input board for C66S Series video wall controllers. It brings four 12G-SDI sources into the wall's processing, so existing cameras, media players or switchers can feed the display. It suits operations rooms, command centres and lecture halls in Qatar that combine several live sources on one video wall.

Which controller does this board fit?

The board is listed under the C66S Series and occupies an input slot in that controller. Before ordering, count your free input slots and confirm the chassis configuration. SmartRooms Qatar can check this against your existing C66S setup during quotation, so you know the board fits your wall.

Does it support 12G-SDI as well as older SDI formats?

Yes. The board accepts 12G-SDI under ST-2082 and also handles 6G under ST-2081, 3G under ST-424 and HD under ST-292. It supports 3G Level A and Level B in DS mode. This lets you connect newer 12G sources and keep older HD players in service on the same wall.

What input resolution and frame rate does it accept?

The maximum input resolution is 4K. Input frame rates from 25 Hz to 60 Hz are supported. Check each source's output format against this range before ordering, particularly for older equipment that may output at a different frame rate.

Does the board support HDR?

Yes. It supports HDR10, compliant with SMPTE ST 2084 and SMPTE ST 2086, and it also supports HLG. This allows high dynamic range content from compatible cameras or players to reach the video wall. Confirm that your source devices output HDR before expecting it on the display.

How many inputs and outputs does it provide?

It provides four video inputs and four loop-through outputs, one loop-through for each input. The loop-through lets the same signal continue to another device, such as a monitor or recorder, without a separate splitter. Plan cabling for both the input and loop-through connections on each channel.

Does the board carry audio with the video?

It supports four audio inputs carried as in-band audio, with dual-channel audio and sampling rates of 32 kHz, 44.1 kHz and 48 kHz. Confirm that your sources output audio at one of these sampling rates. If your event or control room needs audio routed to the wall, plan that path during the site survey.

Can it be used for a ministry operations room in Doha that mixes old and new sources?

Yes, that is a common use. Older HD media players and newer 4K cameras can share one wall because the board accepts 12G, 6G, 3G and HD SDI signals. Start by listing every source, its format and its frame rate, then request a quote for the number of inputs needed.

Is it suitable for a stadium control room in Lusail during events?

It can be used in a stadium control room that switches several live feeds to a display. The four inputs, loop-through outputs and 4K maximum input resolution suit that job. Confirm the feed count, the frame rates and the audio sampling rates with SmartRooms Qatar before ordering, and arrange a free site survey to plan the cable routes.

Can it support a hospital command centre in West Bay that shows camera and monitoring sources?

It can carry SDI camera and monitoring sources into a wall display, including 4K and HDR inputs. Its HDR10 and HLG support and 4K maximum input resolution suit high-detail feeds. Check each source's output format and frame rate first, and confirm the room environment with the SmartRooms Qatar team before installation.

What environment should the board be installed in, given Qatar's summer heat?

The source data does not state an operating temperature range for this board, so the SmartRooms Qatar team should confirm conditions before installation. Install it in an air-conditioned control room or equipment space, and do not place it in an unventilated area. A free site survey can check the room before the controller is mounted.

Can a government authority buy this board through an LPO or tender?

Yes. SmartRooms Qatar accepts purchase orders (LPOs) and government tenders, including Monaqasat, and payment can be made by bank transfer, cheque or purchase order. Send the controller model and the number of inputs needed, and a quotation is usually prepared within one working day. Products are covered by the manufacturer's warranty.