DS-C80N-01HO
Hikvision DS-C80N-01HO Distributed HDMI Output Node
- Resolution
- 8192 × 4320
Priceon request
QuotationWithin 1 working day
DeliveryConfirmed with your quote, based on stock
Overview
The Hikvision DS-C80N-01HO is a half-width HDMI output node for distributed video wall systems. It drives one HDMI 1.4 display at up to 1080p60 and connects to the network through a Gigabit SFP port or a Gigabit Ethernet port, with PoE (802.3at) or an external supply for dual power. Its OLED status screen and 0 to 50 °C rating suit control rooms and schools in Qatar. Request a quote.
A node that keeps each screen running on its own
The Hikvision DS-C80N-01HO is an output node for distributed video wall systems. It receives video over the network and drives one HDMI display, so each screen in a wall can be fed by its own node instead of relying on a single central box. Because nodes operate independently, a fault in one unit does not stop the rest of the wall, which matters in control rooms that cannot go dark.
Specifications that matter for a buyer
- Output: one HDMI 1.4 port rated to 1080p, including 1920 × 1080 at 60 Hz and 50 Hz.
- Network: one 1000 Mbps SFP optical port and one 1000 Mbps Ethernet port, with hot backup between them.
- Decoding: 16 channels of 1080p network camera streams, with H.264, H.265, Smart 264 and Smart 265 support.
- Power: 802.3at PoE, or an external 110 to 240 VAC supply for dual power; consumption of 30 W or less.
- Environment: 0 to 50 °C working temperature and 0 to 95% humidity.
- Size: 210 × 42 × 180 mm and 1.08 kg, half-width so two nodes fill one rack width.
Where it fits in Qatar
Three situations show how the node is typically used by organisations in Qatar:
- An operations room at a government authority in Doha, where camera feeds from several sites appear across a 1080p wall.
- A university control room in Education City or Lusail, where campus cameras and lecture capture share a display wall.
- A hotel or mall security desk in West Bay, where network cameras feed a row of monitors that operators watch in shifts.
Planning the installation
Start by counting outputs. Each display that needs its own feed requires its own node, so the wall must be designed with enough nodes for the number of screens. Check the PoE budget of the switch ports or allow for an external supply, and leave room in the cabinet for airflow. The packing list includes a power cord, a mounting bracket and a connecting bracket, so account for those when sizing the rack.
Qatar summers can push ambient temperatures above 45 °C. Because the node is rated for 0 to 50 °C, keep equipment cabinets ventilated and away from direct sun, and ask for a site survey so the location is checked before installation. SmartRooms Qatar offers free site surveys, and quotations are usually issued within one working day.
Request a quote
Tell us the number of displays, the camera count and the rack layout, and we will prepare a quotation for the DS-C80N-01HO. Schools, ministries and companies can order against a purchase order (LPO) or a government tender, including Monaqasat. Request a quote from SmartRooms Qatar to confirm the right node count for your video wall.
Highlights
- HDMI 1.4 output at up to 1920 × 1080 at 60 Hz
- Gigabit SFP and Gigabit Ethernet ports with hot backup
- PoE (802.3at) plus external 110 to 240 VAC power option
- Decodes up to 16 channels of 1080p network cameras
- Half-width design; two nodes match one rack width
- Operating range 0 to 50 °C, humidity 0 to 95%
Estimated timeline
Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.
Specifications
62 specifications · Source: manufacturer · checked Oct 2026
Device Feature3
- Device Type
- Output node
- KVM Function
- No
- Dual Device Hot Backup
- Supported, customized
Interface12
- Optical Interface
- 1 channel of 1000 Mbps SFP port
- Electrical Interface
- 1 channel of 1000 Mbps Ethernet port
- USB Interface
- 1 × USB 2.0 port
- Screen Type
- OLED 128 × 64 dot-matrix screen
- Other Interfaces
- 1 × Console port for debugging
- RS-232 Interface
- 1 channel, Phoenix terminal
- RS-485 Interface
- 1 channel, Phoenix terminal
- IO/IR IN Interface
- 1 channel, Phoenix terminal, customized by software
- IO/IR OUT Interface
- 1 channel, Phoenix terminal, customized by software
- IR POWER Interface
- 1 channel, 3.3 V, Phoenix terminal
- RELAY Interface
- 1 channel, Phoenix terminal
- RESET Interface
- 1 channel
Video Wall20
- Video Walls
- 32 (If the video wall quantity exceeds this limit, the custom evaluation is required.)
- Video Wall Scale
- One video wall supports up to 320 output nodes. (If the video wall scale exceeds this limit, the custom evaluation is required.)
- Open Windows
- 17, including 8 local signal sources, 8 network signal sources, and 1 alarm pop-up window
- Input Source Copy Capability
- The signal from a single input node can be copied into multiple signals and output to multiple output ports.
- Layers Per Screen
- 17, including 8 local signal sources, 8 network signal sources, and 1 alarm pop-up window
- Layers per Device
- 1024
- Scenes
- 1024
- Scene Auto-Switch Delay
- 400 ms
- Plans
- 256
- UHD Fusions
- 16
- Background Image
- Up to 4 background images. The maximum size of the background image that can be stored locally is 16 M. Each video wall can display only 1 background image.
- Background Resolution
- 8192 × 4320
- Background Format
- JPG/JPEG
- Subtitles
- 4
- Output Logo Overlay
- Not supported
- Output OSD
- Not supported
- Local Signal Source Decoding Delay
- 50 ms (2K60 signal source), 90 ms (4K60 signal source);
- Network Signal Source Decoding Delay
- 300ms
- Signal Source Live View
- Supported on the client.
- Window Division
- 1, 4, 9, 16
General10
- Working Temperature
- 0 °C to 50 °C
- Working Humidity
- 0% to 95%
- Indicator
- 1 × single double base color light indicator, 1 × optical port indicator, 1 × network port indicator
- Net Weight
- 1.08 kg (2.38 lb.)
- Gross Weight
- 1.67 kg (3.68 lb.)
- Dimensions (W × H × D)
- 210 mm × 42 mm × 180 mm ( 8.27 inch × 1.65 inch × 7.09 inch)
- Installation Method
- Magnetic installation (optional), planar arrangement, rack installation
- Packing List
- 1 × DS-C80N-01HO, 1 × regulatory compliance and safety information manual, 1 × power cord, 1 × mounting bracket, 1 × connecting bracket
- Power Consumption
- ≤ 30 W
- Power Supply
- Power supply: 110 VAC to 240 VAC, 0.7 A POE: 802.3at protocol
Video5
- Video Output Interface Type
- HDMI 1.4
- Video Output Interfaces
- 1
- Max. Video Output Resolution
- 1080P
- Loading Capacity for Video Output to LED
- Single port load 2600000, Width 288 - 3840, Height 288 - 2160;
- Video Output Resolution
- 1920 × 1080@60 Hz, 1920 × 1080@50 Hz, UXGA (1600 × 1200@60 Hz), WUXGA (1920 × 1200@60 Hz), SXGA3 (1400 × 1050@60 Hz), WSXGA (1680 × 1050@60 Hz), XGA (1024 × 768@60 Hz), SXGA (1280 × 1024@60 Hz), 1280 × 720@60 Hz, 1280 × 720@50 Hz
Audio7
- Audio Input Interfaces
- 1
- Audio Input Interface Type
- 3.5 mm coaxial audio jack
- Audio Channel
- Dual audio channel
- Audio Output Interfaces
- 1
- Audio Output Interface Type
- 3.5 mm coaxial audio jack
- Audio Talk
- Use the audio input port and audio output port
- Audio Sampling Rate
- 24 bit, 48 KHz
Video Decoding3
- Video Decoding Format
- H.264, H.265, Smart 264, Smart 265
- Video Decoding Channels
- 16
- Video Decoding Capability
- 1 channel of 32 MP, 2 channels of 16 MP, 4 channels of 8 MP, 5 channels of 6 MP or 5 MP, 8 channels of 4 MP, 16 channel of 1080p
Audio Decoding2
- Audio Decoding Format
- G711A, G711U, G722, G722.1, AAC_LC
- Audio Decoding Channels
- 1
Downloads
6 files from the manufacturer
PDF
Hikvision DS-C80N-01HO datasheets (PDF, 704 KB)
PDF
Hikvision DS-C80N-01HO manuals & guides (PDF, 3.7 MB)
PDF
Hikvision DS-C80N-01HO manuals & guides (PDF, 2.9 MB)
PDF
Hikvision DS-C80N-01HO brochures (PDF, 13.3 MB)
PNG
Hikvision DS-C80N-01HO drawings & cad (PNG, 73 KB)
0_26
Hikvision DS-C80N-01HO software & firmware (0_260423)
Questions about DS-C80N-01HO
What is the DS-C80N-01HO used for?
It is an output node for Hikvision distributed video wall systems. It receives signals over the network and drives one HDMI display, so a control room in Doha can build a wall where each screen is fed by its own node. It suits screens that show live camera feeds or operational dashboards.
Does a distributed wall with this node need a central server?
No. Each node works independently, and the manufacturer data states that a failure in one node does not affect the rest of the system. The node also works with centralised video wall controllers, multi-functional video centres and decoders, so you can start with a few nodes and add more as the wall grows.
What is the maximum resolution on the HDMI output?
The HDMI 1.4 output is rated at 1080p. Listed modes include 1920 × 1080 at 60 Hz and 50 Hz, WUXGA at 1920 × 1200 and XGA at 1024 × 768. If your display needs a 4K panel fed directly from this node, confirm the requirement with the SmartRooms Qatar team before ordering.
Can it be powered over Ethernet in a school?
Yes. The node follows the 802.3at (PoE+) standard, so a PoE+ switch port can power it. You can also use an external supply from 110 to 240 VAC for a dual power arrangement. Power consumption is 30 W or less, so check that the switch port in a classroom cabinet has enough PoE budget.
Will it run on Qatar's 240 V mains supply?
The external power input is rated 110 to 240 VAC, which covers the 240 V supply used across Qatar. The packing list includes a power cord. If your site uses BS 1363 (Type G) sockets, confirm with the SmartRooms Qatar team that the supplied cord's plug suits your installation before ordering.
How many camera streams can one node decode?
One node can decode 16 channels of 1080p network camera streams. Other listed combinations are 8 channels of 4 MP, 2 channels of 16 MP and 1 channel of 32 MP. It handles H.264, H.265, Smart 264 and Smart 265, and can switch between main and sub-streams, which helps a wall show many cameras at once.
What network connections are available for a campus?
Each node has one Gigabit SFP optical port and one Gigabit Ethernet port, and the two can act as hot backup for each other. A university in Education City, for example, can run fibre between buildings to the SFP port and keep copper as a fallback. Confirm which SFP module your fibre run requires before ordering.
How does it mount in a rack?
The node is half-width, so two nodes take the width of one standard rack. It can be rack-mounted with the supplied mounting bracket, placed flat on a shelf, or fixed magnetically, which is optional. Its dimensions are 210 × 42 × 180 mm and it weighs 1.08 kg. A free site survey before installation can confirm rack space and cable routes.
Can it sit in a hot equipment room in summer?
The working temperature range is 0 to 50 °C at 0 to 95% humidity. Qatar summers can go above 45 °C, so the rack needs airflow and a cooled space, and the node should stay within its rated range. If your room cannot hold those conditions, ask the SmartRooms Qatar team to review the location during the site survey.
Can it control other equipment in the room?
The node has RS-232 and RS-485 ports, IO/IR inputs and outputs, a relay port and a 3.3 V IR power port, with some IO/IR functions set by software. The system supports central control of lighting, curtains and infrared devices. Confirm the exact devices and cabling with the SmartRooms Qatar team before ordering.
How is it monitored and maintained remotely?
Each node has an OLED screen and status indicators. Its status can be viewed through the web client (Chrome 45 or later, or IE8) and mobile apps for Android and iOS. You can read and set parameters, view logs, restart, restore defaults and upgrade the device remotely, with alarms for network, temperature and fan faults.
Can we order it on an LPO for a government tender?
Yes. SmartRooms Qatar accepts purchase orders (LPOs) and government tenders, including Monaqasat. Quotations are usually issued within one working day, and payment can be made by bank transfer, cheque or purchase order. Products are covered by the manufacturer's warranty.
