86-inch InfinityBoard 2.2

What the InfinityBoard 2.2 brings together in one room

The NEC 86-inch InfinityBoard 2.2 is an all-in-one collaboration display built for rooms where a single large surface has to handle sketching, document review and video calls. The panel, touch layer, camera, speakers and computer share one enclosure, so the room needs one display, one set of cables and one mount instead of a separate PC, webcam and sound system. The manufacturer has discontinued this model, so the sections below cover what it offers and what to plan for if you already own one or are weighing it against a current replacement.

Panel and touch facts that matter in daily use

The 3840 x 2160 IPS panel delivers a native 4K image across an active area of 1,895 x 1,065.9 mm. Brightness is rated at 500 cd/m2, with the shipment setting at 350 cd/m2, and the typical contrast ratio is 1,200:1. Colour depth is 10-bit, and the panel accepts 1920 x 1080, 1920 x 2160, 3840 x 2160 and 4096 x 2160 inputs. A 3 mm toughened, anti-glare cover glass with 88% light transmission sits over the panel.

The InGlass touch layer recognises up to 20 simultaneous touches and works with fingers, gloves and styluses of 2 mm or more. Windows Ink and palm rejection are included, so a presenter can rest a hand on the glass while writing. Two passive pens are supplied, and touch accuracy is listed at under 1 mm.

Camera, speakers and the slot-in computer

The integrated Huddly IQ camera outputs 1080p at 30 fps with a 150-degree diagonal viewing angle, Genius Framing for automatic framing and 3x lossless digital zoom. It has no microphone, so audio pickup for remote participants should be checked during planning. The conference speakers are rated at 40 W input with a sound pressure level of 82.1 dB.

The OPS slot-in PC uses an Intel i7-7820EQ processor, 8 GB of DDR4 RAM in dual-channel mode and Microsoft Windows 10 Professional. OPS is an open pluggable standard, so the computer module can be swapped later rather than the whole display. The slot is listed with a maximum draw of 4.7 A / 75 W.

Where it fits in Qatar

• Ministry or authority boardroom in Msheireb or West Bay: one 86-inch surface for workshop sessions, with the camera and speakers covering calls to colleagues in other Doha offices or abroad.
• Design or planning team in Lusail: a large canvas for reviewing drawings and sketching ideas with pen or finger, with Windows Ink for annotations.
• Private school in Al Wakrah or Al Sadd: a large teaching surface for a big classroom or staff meeting room, running the Windows applications the school already uses.

What to plan before installation

At 91.7 kg and 2,192 x 1,142 x 86 mm without stand, the panel needs a wall or trolley rated for its weight. VESA patterns of 400 x 400 and 600 x 400 mm (FDMI) with M8 holes are listed, and a wall mount (PDW T XL-2) and trolleys (PD02MHA, PD03MHA) are available as options. SmartRooms Qatar offers a free site survey to check wall structure, power and cable routes before installation. The operating range is 0 to +35 °C at 20 to 80% humidity, so the display should be placed in a temperature-controlled room. Because Qatar summer temperatures can exceed 45 °C, confirm the exact location with the SmartRooms Qatar team before ordering. Power draw is 242 W shipping, with under 0.5 W in power-saving mode.

Because this model is discontinued, the most useful next step is a quotation for a current equivalent or a compatible replacement that matches your room size, mounting and connectivity. Request a quote from SmartRooms Qatar and include your room dimensions, the number of units and whether you need a purchase order (LPO).