Prestigio PMBWMK Wall Mount Kit for MultiBoards

Name: Prestigio PMBWMK Wall Mount Kit for MultiBoards
Brand: Prestigio
SKU: prestigio-pmbwmk
Availability: InStock

Overview

The Prestigio PMBWMK is a black wall mount kit for Prestigio MultiBoards from 55 to 98 inches. It is an accessory, not a display, for schools, offices and meeting rooms in Doha that want a compatible MultiBoard fixed to the wall. The kit is compatible with the PMBST01 stand and carries a 12-month manufacturer warranty. Request a quote to confirm the right kit for your panel.

What the PMBWMK kit does

The Prestigio PMBWMK is a wall mount kit, not a display. It is listed as a spare part for Prestigio MultiBoards, and it is the fixing you order when a board is going onto a wall rather than onto a mobile stand. The kit is finished in black, so it suits boardrooms and classrooms where the hardware should stay understated.

Compatibility: panel sizes and the PMBST01 stand

Check the panel size before you order. The manufacturer data lists compatibility with MultiBoards from 55 to 98 inches and names all Prestigio MultiBoards as parent products. The data also states that the kit supports the PMBST01 stand. Stand support is not the same as stand supply, so if a floor-standing option is needed alongside the wall position, ask for the stand to be quoted separately.

Specifications that affect planning

Pack size: 1015 mm long, 285 mm wide and 75 mm high, one piece per box.
Gross weight: 5.8 kg per box.
Warranty: 12 months, validated by serial number, unless local law requires otherwise.
Pallet quantity: 60 boxes per pallet, by air or by sea, on a 1240 x 1250 x 1850 mm pallet.
EAN code: 8595248119550.

Because each box holds one piece, a school or office fitting out several rooms will receive several boxes. The 1015 mm box length is worth measuring against lift cars, corridors and store-room doors on the route to each install point.

Where it fits in Qatar

A private school in Al Wakrah fitting out new classrooms with MultiBoards between 55 and 75 inches would order one kit per panel, with the room list and panel models attached to a single LPO. The facilities team can then schedule fixings room by room.

A government office in West Bay replacing an old meeting room display with a fixed board needs the part number, EAN and warranty terms in writing before booking the installer. SmartRooms Qatar usually issues a written quotation within one working day.

A training centre in Msheireb that runs flexible session rooms can use the PMBST01 stand compatibility to decide whether a panel stays on the wall or moves on a stand, depending on the timetable.

Planning the wall fixing

The source data gives the kit weight but does not list wall types, fixing spacing or a load rating, so do not assume the wall is suitable. Check the wall construction and the weight of the panel it will carry, since the panel weight is not part of this kit's data. SmartRooms Qatar offers free site surveys, which are the right time to confirm wall type, cable routes and installer access.

Next step

Send your MultiBoard model, room dimensions and wall details to the SmartRooms Qatar team and request a quote. We supply to all eight municipalities of Qatar and accept purchase orders and government tenders, including Monaqasat.

Highlights

Wall mount kit for MultiBoards from 55 to 98 inches
Compatible with the PMBST01 stand, per manufacturer data
External colour is black
12-month warranty, validated by serial number
Box size 1015 x 285 x 75 mm, 5.8 kg, one piece per box
EAN code 8595248119550

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

24 specifications · Source: manufacturer · checked Oct 2026

Various Spare Parts - Feature4

Accessory Name: Wall Mount Kit
Compatibility: 55-98” MultiBoards wall mounting, and supports stand PMBST01
Parent Products: All Prestigio MultiBoards
External Color: Black

Warranty4

Warranty Products Returnable: Yes
Warranty Term (month): 12 month(s)
Warranty Validation Criteria: Serial Number
Warranty Term Notes: Unless otherwise required by local law (see prestigio-solutions.com/warranty)

Logistic12

Pack Length (mm): 1015 mm
Pack Width (mm): 285 mm
Pack Height (mm): 75 mm
Pack Weight Brutto (kg): 5.8 kg
Pieces in pack: 1
Box Length (mm): 1015 mm
Box Width (mm): 285 mm
Box Height (mm): 75 mm
Box Weight Brutto (kg): 5.8 kg
Packs in Box: 1
Package Type: Box
EAN Code: 8595248119550

Logistic Details4

Quantity of the boxes per pallet (by air)(pcs): 60
Dimensions of pallet (by air): 1240x1250x1850 mm
Quantity of the boxes per pallet (by sea)(pcs): 60
Dimensions of pallet (by sea): 1240x1250x1850 mm

Downloads

3 files from the manufacturer

PDF Datasheets Datasheet PMBWMK (EN) - prestigiosolutions_datasheet_wallmount_pmbwmk_en_1.pdf 8.0 MB WEBP Manuals & guides Installation Guide - install_guide_pmbwmkpmbst01.webp 1.2 MB WEBP Manuals & guides Quick Start Guide - quick_start_guide_pmbwmk.webp 818 KB

Questions about PMBWMK

What is the Prestigio PMBWMK?

The Prestigio PMBWMK is a black wall mount kit for Prestigio MultiBoards. The manufacturer lists it as a spare part, not a display, so it is the fixing you order when a board is going onto a wall. Its data sets compatibility at MultiBoards from 55 to 98 inches. Send your panel model with your request so the kit can be confirmed before you order.

Which MultiBoard sizes does it fit?

The manufacturer data lists compatibility with MultiBoards from 55 to 98 inches and names all Prestigio MultiBoards as parent products. Measure the diagonal of each panel against that range before ordering. If your site mixes sizes, list each room and its panel model in your request so SmartRooms Qatar can confirm one kit per panel.

Does it support the PMBST01 stand?

Yes. The manufacturer data states that the kit supports the PMBST01 stand. Support is not the same as inclusion, and the data does not describe the stand as part of this kit. If a meeting room needs a floor-standing option as well as a wall position, ask for the PMBST01 stand to be quoted alongside the wall kit.

What warranty comes with it?

The manufacturer warranty is 12 months and is validated by serial number. The data notes that local law may require different terms, and the manufacturer publishes its warranty information on its website. Keep your purchase records with the serial number so any warranty claim can be checked quickly.

How is it packed and how much does a box weigh?

Each box holds one piece and measures 1015 mm by 285 mm by 75 mm, with a gross weight of 5.8 kg. Sixty boxes fit on one pallet for air or sea freight, and the pallet measures 1240 x 1250 x 1850 mm. A school fitting out ten rooms should expect ten boxes, so plan storage and the corridor route to each install point.

Can a school in Al Wakrah order kits for several classrooms on one LPO?

Yes. Each panel needs its own kit because each box holds one piece. A private school in Al Wakrah can send the room list and panel models on a single LPO, and SmartRooms Qatar will quote the full set. Quotations are usually issued within one working day, and payment by bank transfer, cheque or purchase order is accepted.

Can a government office in West Bay buy it through a tender?

Yes. SmartRooms Qatar supplies against government tenders, including tenders on Monaqasat, so a ministry or authority in West Bay can request the kit through its procurement process. Give the tender reference, panel model and wall details with your request, so the quotation matches the specification and the installer can be scheduled.

Can I mount it on any wall?

The source data does not list wall types, fixing spacing or a load rating, so do not assume the wall is suitable. Check the construction of the wall and the weight of the panel it will carry, because the panel weight is not part of this kit's data. A free site survey from SmartRooms Qatar is a good time to confirm these points.

Will it suit a Lusail boardroom that wants a dark finish?

The external colour is black, and the source data does not list other finishes. If your Lusail boardroom uses a different interior colour and you want the hardware to match, confirm the finish with SmartRooms Qatar before you request a quote, rather than assuming a colour option is available.

What EAN code should I record for asset tracking?

The EAN code is 8595248119550. Record it with the model number PMBWMK in your asset register or procurement file, since it identifies this exact kit. Pair it with the serial number of the panel it is fixed to, so maintenance staff can trace the installation later.

Is it right for a training centre in Msheireb that changes room layouts?

It suits a training centre that sets up one room for fixed sessions, where the panel stays on the wall. The PMBST01 stand compatibility gives the option of moving the panel when the timetable changes, but the stand must be quoted separately. Check the room layout and the wall before choosing a fixed installation.

Can an energy company in Mesaieed use it in a control room?

Industrial sites in Mesaieed or Ras Laffan can face dust and high heat, but the source data for this kit gives no operating temperature range or dust rating. Ask SmartRooms Qatar to confirm the suitable environment and the rating of the panel itself before fixing it in a control room. The kit is black and listed for MultiBoards from 55 to 98 inches.