Sharp Wall Mount PDW S 32-65 L

Name: Sharp PDW S 32-65 L Landscape Wall Mount for 32-65 inch Displays
Brand: Sharp
SKU: sharp-wall-mount-pdw-s-32-65-l
Availability: InStock

Overview

The Sharp PDW S 32-65 L is a landscape wall mount for a single display, rated for 32 to 65-inch screens and a maximum load of 50 kg. It offers a fixed tilt of 0 or 5 degrees, supports VESA patterns of 300 x 300, 400 x 200 and 400 x 400 mm, and includes a locking padlock. It carries a 3-year warranty and suits classrooms, offices and meeting rooms across Qatar. Request a quote.

What this wall mount is for and which displays it suits

This is a landscape wall bracket for one display, sized for panels from 32 to 65 inches. It follows the VESA standard, so the bracket is fixed to the wall first and the display is then attached to it from the back. The manufacturer lists compatibility with the PN-LM431 and PN-LM551 models, so confirm your panel model before ordering.

Load, tilt and mounting patterns to check

The bracket is rated for a maximum load of 50 kg and weighs 1.5 kg itself. Its tilt is fixed at either 0 or 5 degrees, which is chosen at installation rather than adjusted later. It supports three VESA hole patterns: 300 x 300, 400 x 200 and 400 x 400 mm. Compare these figures with the mounting holes on the back of your display before requesting a quote.

Display sizes: 32 to 65 inches
Maximum load: 50 kg
Tilt: 0 or 5 degrees
VESA patterns: 300 x 300, 400 x 200, 400 x 400 mm
Minimum depth: 35 mm

Where it fits in Qatar

A private school in Al Wakrah fitting out a classroom with a wall-mounted interactive display can use this bracket to hold the panel firmly without taking up floor space, and the locking padlock helps protect equipment in shared areas. A boardroom in West Bay where the screen sits above eye level and faces the seating can use the 5 degree setting to angle the panel toward the table. A reception area in Msheireb or Lusail can keep a single display neatly on the wall.

Planning the installation

Before anything is fixed, check the wall construction and the weight of the display together with any accessories, because the 50 kg limit applies to the whole load on the bracket. A free site survey from the SmartRooms Qatar team can confirm fixing points, wall type and the clearance behind the panel. The package includes a lock plate, a wall plate, two vertical plates with hook, four M6x12 screws and four 6x19x1 washers. Professional installation and delivery to all eight municipalities of Qatar can be included in your quotation. Request a quote for the Sharp PDW S 32-65 L and send us your display model and wall type.

Highlights

Recommended for display sizes from 32 to 65 inches
Landscape orientation with fixed tilt of 0 or 5 degrees
Maximum load capacity of 50 kg
Mount weighs 1.5 kg, minimum depth 35 mm
Locking padlock helps deter theft
3-year warranty stated by the manufacturer

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

11 specifications · Source: manufacturer · checked Oct 2026

Mount4

Installation: Single
Orientation: Landscape
Max. Load Capacity [kg]: 50
Recommended Display Size [inch]: 32 to 65

Mechanical1

Tilt Function [°]: 0; 5

Weight And Dimensions3

Weight [kg]: 1.5
Min. Depth [mm]: 35
Shipping Dimensions (W x H x D) [mm]: 510 x 63 x 43

Vesa1

VESA Pattern [mm]: 300 x 300; 400 x 200; 400 x 400

Additional Features2

Warranty: 3 years
Shipping Content: 1x Lock Plate; 1x Wall Plate; 2x Vertical Plate incl. Hook; 4x Screws M6x12; 4x Washers 6x19x1

Downloads

3 files from the manufacturer

PDF Datasheets DatasheetEnglish.pdf 116 KB PDF Manuals & guides UserManualLandscape.pdf 143 KB PDF Drawings & CAD DrawingLandscape.pdf 49 KB

Questions about Wall Mount PDW S 32-65 L

What display sizes is the Sharp PDW S 32-65 L designed for?

The mount is recommended for displays from 32 to 65 inches and is intended for a single display in landscape orientation. Before ordering, confirm your panel's screen size and that its rear mounting holes match one of the three supported VESA patterns. Also check that your display model is compatible, because this bracket is sold as a separate accessory.

What is the maximum load the wall mount can carry?

The maximum load is 50 kg, and the bracket itself weighs 1.5 kg. Add the weight of your display and any accessories attached to it to confirm you remain within the limit. If the total is close to 50 kg, request a site survey so the SmartRooms Qatar team can check the wall type and fixing points before anything is drilled.

Which VESA patterns does this mount support?

The bracket supports three VESA hole patterns: 300 x 300, 400 x 200 and 400 x 400 mm. Measure the spacing of the four mounting holes on the back of your display, centre to centre, and compare it with these figures. If the pattern matches none of the three, the display will not fit this bracket, so check it before you request a quote.

Can the viewing angle be adjusted after installation?

No. The bracket has a fixed tilt of either 0 or 5 degrees, chosen when it is fitted. In a West Bay boardroom where people sit around a table and the screen is mounted above eye level, the 5 degree setting may help the panel face the seating area. Describe your room layout in the quote request so the correct tilt can be selected.

Which Sharp displays is this wall mount compatible with?

The manufacturer lists compatibility with the PN-LM431 and PN-LM551 models. If your display is a different Sharp model, do not assume it will fit, even if its size falls within the 32 to 65 inch range. Send the exact model number with your quote request, and the SmartRooms Qatar team will check suitability before you order.

Does the mount help prevent theft in shared spaces?

Yes. The bracket has a locking padlock, and a lock plate is included in the package, which adds protection for displays in busy areas. Examples include a hotel lobby in Doha, a school corridor in Al Wakrah or a reception area in Msheireb. Pair the lock with a fixing plan on a solid wall, confirmed by a site survey.

What is included in the box?

The package contains one lock plate, one wall plate, two vertical plates with hook, four M6x12 screws and four 6x19x1 washers. These parts cover the fitting of a single display. Check the contents against this list when they arrive, and tell us early if anything is missing so it can be resolved before installation.

How much clearance depth is needed behind the display?

The manufacturer gives a minimum depth of 35 mm for this bracket. Measure the gap between the wall and the back of the display, including connectors and any cables that must run behind the panel. Record these measurements during the site survey, especially in older Doha buildings where wall finishes and service boxes can reduce the space available.

Can a school in Qatar order several units using a purchase order?

Yes. SmartRooms Qatar accepts purchase orders (LPOs), and government tenders, including Monaqasat, are supported. A school fitting out several classrooms in Al Wakrah or Lusail can send one LPO covering the mounts and the displays together. Payment can be made by bank transfer, cheque or purchase order, and quotations usually follow within one working day.

How should a heavy 65-inch display be planned for a boardroom?

Plan the fixing before ordering. A 65-inch display in a West Bay boardroom needs a wall that can carry the full load and a mounting height that suits seated viewers. Book a free site survey so the SmartRooms Qatar team can check the wall type, the fixing method and the 35 mm minimum depth. Then request a quote covering the mount and professional installation.

Is the mount suitable for hot or dusty areas such as windows or outdoor walls?

The source data gives no operating temperature range and no outdoor rating for this bracket, so it should not be assumed suitable for outdoor walls, direct sunlight or spaces where summer heat exceeds 45°C. Confirm the environment with the SmartRooms Qatar team before requesting a quote, so the installation location can be checked against the manufacturer's specifications.

What warranty applies, and how do I request a quote?

The Sharp PDW S 32-65 L carries a 3-year warranty as stated by the manufacturer. To request a quote, send the display model, the wall type and the room location in Qatar. Quotations usually come back within one working day, and you can pay by bank transfer, cheque or purchase order.