Elo 4602L (Discontinued) · Replacements in Qatar

Name: Elo 4602L 46-inch Interactive Touch Signage Display (Discontinued)
Brand: Elo
SKU: elo-4602l
Availability: Discontinued

Overview

The Elo 4602L is a 46-inch touch signage display that the manufacturer has discontinued and replaced with the 5053L. It was sold in two touch configurations: infrared with 20 touch points, and TouchPro PCAP with 12. With a 1920 x 1080 panel, 500-nit LCD and 24-hour rated operation, it suited organisations running wayfinding, endless aisle or classroom collaboration. Request a quote for the 5053L or another current equivalent.

Discontinued model and its replacement

The Elo 4602L is a discontinued 46-inch touch signage display, replaced by the 5053L. This page is for organisations that already run a 4602L, buyers comparing it with newer models, and anyone looking for a replacement. Request a quote and we will recommend a current equivalent or a compatible replacement for your site.

Two touch technologies on one 46-inch panel

Both configurations share a 1920 x 1080 LCD panel with a 16:9 active area of 1018.08 mm by 572.67 mm, a 4000:1 contrast ratio and 178-degree viewing angles. The infrared model (E222370) tracks up to 20 touch points and is listed at 450 nits. The TouchPro PCAP model (E222373) tracks up to 12 touch points, has a clear surface with an anti-friction finish and is listed at 430 nits. The LCD panel itself is rated at 500 nits in both.

Video inputs: two HDMI ports, one DisplayPort and one VGA
Touch and control: USB Type B for touch data, GPIO, and an RJ45 port for the optional wired OSD remote
Audio: line-in, headphone output and 4 x 5 W stereo speakers
Power: 100 to 240 VAC at 50/60 Hz through an IEC 60320 C6 inlet

Typical draw in monitor-only form is 96 W on at 230 V and 50 Hz, 8.0 W in sleep and 2.8 W off, with a maximum operating time of 24 hours per day.

Where it fits in Qatar

A clinic check-in area in Al Rayyan can use the screen for department wayfinding and self check-in. A training centre in Education City can run it as a collaborative board, where an instructor annotates lessons and learners respond on the same surface. A Lusail retail unit can use it for endless aisle browsing, adding an optional magnetic stripe reader or barcode scanner from the accessory range.

Heat is the main constraint. Portrait and landscape use is rated 0 to 40 °C, while table-top use and systems with Intel OPS modules are rated 0 to 35 °C. Qatar summers can push outdoor temperatures above 45 °C, so install the unit in an air-conditioned interior and confirm the room temperature with our team before ordering.

Planning the installation

Unpackaged weight: 23.85 kg (infrared) and 24.01 kg (PCAP), without the ECMG3 module
Mounting: VESA 400 x 400 mm pattern with M6 fixings
Power cable: the box includes a UK plug lead, so we will confirm the right lead for your socket

Book a free site survey before wall-mounting a unit of this weight, so that wall structure, cable routes and viewing height are checked first. The manufacturer lists a three-year warranty. Ask us which extended service options can be supplied to Qatar.

Ordering a current equivalent

Send us the part number, E222370 or E222373, with your site location and quantity. We will return a quotation, usually within one working day, for the 5053L or another current equivalent. Some accessories listed for the 4602L have been discontinued or replaced, so we will confirm compatibility first. Purchase orders, LPOs and government tenders, including Monaqasat, are welcome. Request your quote today.

Highlights

Discontinued by Elo; replacement model is the 5053L
Infrared version E222370 with 20 touch points
TouchPro PCAP version E222373 with 12 touch points
1920 x 1080 LCD panel, 500-nit brightness, 4000:1 contrast
Operating 0 to 40 C in portrait or landscape, 0 to 35 C table-top
Two HDMI, DisplayPort, VGA and USB Type B touch input

Estimated timeline

Quotation within 1 working day · delivery timing depends on stock availability, and we confirm it with your quotation.

Specifications

42 specifications · Source: manufacturer · checked Oct 2026

Technical42

Part Number(s): Infrared (clear) - E222370 TouchPro PCAP (clear with anti-friction) - E222373
Enclosure Color: Black
Touch Technology & Capacity: PCAP (TouchPro® Projected Capacitive) - 12 Touch Infrared - 20 Touch
Touch Interfaces: USB
Diagonal Size: 46'' diagonal, Active matrix TFT LCD (LED)
Active Area: 40.08" x 22.55" / 1018.08mm x 572.67mm
Aspect Ratio: 16:9
Resolution: 1920 x 1080 @ 60hz
Viewing Angle: Horizontal: ±89° or 178° total / Vertical: ±89° or 178° total
Number of Colors: 16.7 million
Brightness (typical): LCD Panel: 500 nits IR: 450 PCAP: 430 nits
Response Time-total (typical): 6.5 msec
Contrast Ratio: 4000:1
I/O Ports: Input: AC power input, USB type B (for Touch), VGA, 2x HDMI, GPIO, DisplayPort, Audio Line in Output: Audio Headphones out, RJ45 (for optional OSD remote)
Input Video Frequency: Horizontal: 31.5 - 73 KHz Vertical: 47 - 63 Hz
Audio Input Connector: 3.5 mm TRS jack
Audio Input Signal Range: 1Vrms max stereo signal (standard PC line out)
Headphone Output Connector: 3.5 mm TRS jack
Speakers: 4 x 5 W stereo speakers
Power Supply: AC internal - Replacement power cables are available with the purchase of a replacement cable kit - Elo P/N: E060080
Input Connector: IEC 60320 C6
Input Voltage: 100 - 240 VAC 50/60Hz
Maximum Operating Time: 24 hours/day
Power Consumption (Typical): Monitor Only (Typical at 120V at 60Hz): ON: 95.0 W; SLEEP: 8.7 W; OFF: 2.5 W (Typical at 230V at 50Hz): ON: 96.0 W; SLEEP: 8.0 W; OFF: 2.8 W Monitor with ECMG3 (Typical at 120V at 60Hz): ON: 106 W; SLEEP: 11.3 W; OFF: 11.0 W (Typical at 230V at 50Hz): ON: 107.0 W; SLEEP: 11.2 W; OFF: 11.0 W
Dimensions: IR: 42.63" x 25.09" x 2.43" / 1082.8mm x 637.4mm x 61.6mm PCAP: 42.63" x 25.09" x 2.02" / 1082.8mm x 637.4mm x 51.3mm
Shipping Box Dimensions: 48.03" x 8.27" x 29.53" / 1220mm x 210mm x 750mm
Weight (Unpackaged): IR: With ECMG3: 59.19lbs / 26.85 Kg Without ECMG3: 52.58 lbs / 23.85 Kg PCAP With ECMG3: 59.55 lbs / 27.01 Kg Without ECMG3: 52.93 lbs / 24.01 Kg
Weight (Packaged): IR: Without ECMG3: 67.79 lbs / 30.75 Kg PCAP Without ECMG3: 68.10 lbs / 30.89 Kg
Operating Temperature: Portrait/Landscape Mode: 0°C to 40°C / 32°F to 104°F Table top Mode and with Intel OPS modules: 0° C to 35° C OR 32°F to 95°F
Storage Temperature: -20°C to 60°C / -4°F to 140°F
Humidity: Operating: 20% to 80% Storage: 10% to 95%
Mounting Options: VESA mount per MIS-F, 400, 400, 6MM
Sealability: Touchscreen sealed to bezel Touchscreen sealed to LCD
MTBF: 50,000 hours demonstrated
Warranty: 3-year
Extended Service Options: 4 year warranty coverage + AUR - Elo P/N: E740135 5 year warranty coverage + AUR - Elo P/N: E740330 3 year warranty coverage + OSE - Elo P/N: E740527 4 year warranty coverage + OSE - Elo P/N: E740728 5 year warranty coverage + OSE - Elo P/N: E740918
Optional Product Coverage: Extended Warranty (North America and EMEA only)
Regulatory approvals and declarations: UL, FCC (US) - Class A cUL, IC (Canada) CB (International safety) CE (Europe) - Class A CCC (China) EAC (Russia) VCCI (Japan)
RFID Supported Protocols: ISO - 14443-A ISO - 14443-B ISO – 15693
What's in the Box: HDMI cable (Type A plug to Type A plug), USB cable (Type A plug to Type B plug), power cable, IEC 60320-C5 to NA plug power cable, IEC 60320-C5 to EU/KR plug power cable, IEC 60320-C5 to UK plug, 3.5mm Audio Cable, Energy label according to EU Regulation
Optional PCAP Stylus Pen: E066148
IDS Optional Accessories: Barcode Reader – Elo P/N: E093433 2D Barcode Scanner – Elo P/N: E926356 Elo Backpack® - Elo P/N: E611864 Elo Backpack® 3.0 - Elo P/N: E901355 Magnetic Stripe Reader – Elo P/N: E001002 NFC/RFID Reader – Elo P/N: E001004 Wallmount for IDS 02 Series – Elo P/N: E275050 EMV Cradle for Ingenico ICMP - Elo P/N: E200788 EMV Cradle for Verifone E355 - Elo P/N: E201363 EMV Cradle for MagTek eDynamo - Elo P/N: E375343 EMV Cradle for Ingenico RP457c (with Audio Jack, BT and USB) - Elo P/N: E586981 EMV Cradle for Ingenico RP457c (with BT and USB) - Elo P/N: E710930 Fingerprint Scanner – Elo P/N: E134286 EC

Downloads

0 files from the manufacturer

No downloadable files are listed for this model yet. Ask us and we will send the datasheet.

Questions about 4602L

Is the Elo 4602L still sold new?

No. Elo has discontinued the 4602L and replaced it with the 5053L, which the manufacturer names as its successor. If you are buying for a new site, or need a spare for a 4602L already installed, send us the part number E222370 or E222373. We will confirm a current equivalent or compatible replacement, and you can then request a quote.

What is the difference between E222370 and E222373?

The part number identifies the touch technology. E222370 is the infrared version, which recognises up to 20 touch points and is listed at 450 nits for its touch layer. E222373 is the TouchPro PCAP version, which recognises up to 12 touch points, has an anti-friction surface and is listed at 430 nits. Both use the same 46-inch, 1920 x 1080 LCD panel rated at 500 nits.

Which version suits a busy reception area in Doha?

If many visitors touch the screen every day, the infrared E222370 offers 20 touch points against 12 on the PCAP model, which may matter at a busy West Bay reception. The PCAP version has an anti-friction surface that may suit frequent use. Choose based on expected touch volume and how the content will be used, and confirm the decision with our team before ordering.

Is the panel bright and sharp enough for a classroom in Education City?

The panel shows 1920 x 1080 resolution at 60 Hz, with a 500-nit LCD brightness rating and a 4000:1 contrast ratio. It includes two stereo speakers rated at 5 W each. Room size and window exposure both affect how clearly content reads, so for large lecture spaces or rooms with wide windows, request a site review before choosing the model.

Can it run 24 hours a day in a Lusail lobby during summer?

The manufacturer lists a maximum operating time of 24 hours per day, but the operating temperature is 0 to 40 C in portrait or landscape and 0 to 35 C in table-top mode or with Intel OPS modules. A lobby exposed to direct sun or heat from large glazing in summer can exceed these limits, so an air-conditioned indoor location is essential. Check the room conditions with us before ordering.

What inputs does a clinic check-in screen in Al Rayyan need?

The unit has two HDMI ports, one DisplayPort and one VGA input for video, and a USB Type B input for touch data. It also has line-in audio, a headphone output, a GPIO port and an RJ45 port for the optional wired OSD remote. Check that your check-in computer or media player has a matching output before you choose cables.

Does it work on Qatar's 240 V supply?

The power input accepts 100 to 240 VAC at 50/60 Hz through an IEC 60320 C6 inlet, so Qatar's 240 V, 50 Hz mains falls within the stated input range. The box includes IEC power leads for North American, EU/Korean and UK plugs. Qatar uses BS 1363 sockets, so we will confirm the correct lead for your socket before installation.

How heavy is it, and what does a meeting room wall in Msheireb need?

Unpackaged, the infrared model weighs 23.85 kg without the ECMG3 module, and the PCAP model weighs 24.01 kg. With an ECMG3 kit the weights rise to 26.85 kg and 27.01 kg. The VESA pattern is 400 x 400 mm with M6 fixings, and the depth is 61.6 mm for infrared and 51.3 mm for PCAP. A site survey will confirm the wall can carry the load.

Can I add a computer module or an OPS system?

Yes. Elo lists ECMG3 computer kits with Core i3, i5 and i7 processors, some with Windows 10 and some with no operating system. An OPS adaptor kit for the IDS 02 Series is also listed. Systems with Intel OPS modules are rated for 0 to 35 C, so check the room temperature before adding one. We can match the kit to your software and quote the complete package.

Which accessories are compatible with this display?

The manufacturer lists barcode readers, a 2D barcode scanner, a magnetic stripe reader, an NFC/RFID reader, a fingerprint scanner, EMV card reader cradles, a wired OSD remote, a stand, a wall mount and side-mount brackets. Some accessories for the 4602L have been discontinued or replaced, including the temperature sensor and the first-generation 1D barcode reader. Ask us to confirm compatibility with the 5053L.

What warranty comes with the 4602L?

The manufacturer lists a three-year warranty for this model. Elo also lists extended warranty and service plans for the 4602L, with terms set by the manufacturer. We will confirm which extended options can be supplied with your order in Qatar and explain what each one covers before you buy.

How can a school buy several units through an LPO or government tender?

SmartRooms Qatar supplies against purchase orders (LPOs) and government tenders, including Monaqasat. Send the part number, installation locations and quantity, and we will usually return a quotation within one working day. Because the 4602L is discontinued, the quotation will cover the 5053L or another current equivalent once compatibility is confirmed. Payment can be made by bank transfer, cheque or purchase order.