32TA3E

A 32-inch touch display for ground-level public use

The LG 32TA3E is a 32-inch signage display with a touch layer built into the screen, so it can run interactive menus, wayfinding and promotions without a separate overlay frame. This model is discontinued: the manufacturer has ended production, so SmartRooms Qatar suggests it mainly for organisations that already own one or need a matching unit for an existing installation. For any new project, request a quote for a current equivalent or compatible replacement.

Touch, writing and display performance

The touch layer uses infrared detection and supports up to 10 touch points with a 10 ms scan time, so several people can interact with the screen at once. The protection glass is 2.8T with an anti-glare finish, which helps readability under bright lighting. The IPS panel offers a 450 cd/m² typical brightness and wide viewing angles, so people standing to the side can still read content. The embedded writing application runs on the display itself, so whiteboard sessions do not need a connected PC.

• Touch: IR scattering type with a USB 2.0 interface
• Panel: 32-inch, 450 cd/m² typical brightness
• Reliability: conformal coating on the circuit board against dust, humidity and iron powder

Connections, software and control

Two HDMI inputs, DisplayPort, DVI-D, RGB, an audio input and a USB 3.0 port cover most laptop and media-player setups, with a DisplayPort output and an audio output for passing signal onward. Control options include RS232C in and out, RJ45 and an IR receiver input. The model is listed as compatible with AV control systems, so a facilities team can manage several displays from one location. Content is managed with SuperSign CMS and monitored with SuperSign Link. The LG webOS platform supports HTML5 web apps and offers an SDK for system integrators building custom applications. If the active input drops, failover switches automatically to a backup source, while picture-by-picture and picture-in-picture modes let two sources share the screen.

Where the 32TA3E fits in Qatar

A clinic in Al Sadd could place one in its reception area for patient check-in and directions, provided the lobby is air-conditioned. A training centre in Education City might use it as a shared whiteboard for small teams, without a PC needed for writing sessions. A government office in Msheireb could run a touch information board beside a service counter and connect it to a central AV control system. In each case the touch specification, connection options and indoor operating limits matter more than the screen size alone.

What to plan before ordering

The monitor measures 768.4 x 462.9 x 74.5 mm and weighs 10.3 kg without packaging, or 12.2 kg packed in a 852 x 560 x 152 mm carton. It uses a 200 x 200 mm VESA mount interface. A stand (ST-322T), a wall bracket (LSW230B) and an OPS Kit (KT-OPSA) are listed as optional accessories. The rated operating temperature is 0°C to 40°C with 10% to 80% humidity. Summer temperatures in Qatar can exceed 45°C outdoors, so plan room cooling and airflow, and confirm the location with the SmartRooms Qatar team before fixing a heavy unit to a wall. Free site surveys are available before installation, and quotations are usually provided within one working day. Organisations ordering through a purchase order or a government tender can send their LPO details with the request.

To check whether a current equivalent or compatible replacement suits your site, request a quote from SmartRooms Qatar with your room size, touch requirements and input sources.